KAOLALI Car Head Up Display Digital HUD OBD2 GPS Speedometer Dual System Display Smart Gauge MPH Over Speed Alarm Odometer

  • OBD+GPS DUAL SYSTEM: The car head up display adopts OBD and GPS modes. Built-in GPS module head-up display is more compatible than traditional HUD with OBD only, can be suitable for all cars, when your car does not has OBD, you can switch to GPS working Mode. In the OBD mode, GPS function can be displayed at the same time..
  • RICH DATA DISPLAY INTERFACE: Multifunctional cars digital meter can switch 8 kinds of interfaces, it can present a simple interface, a speed interface, an OBD interface, a 6-grid interface, a scroll pressure interface, an acceleration test interface, a brake test interface, and a full-function interface..
  • FUNCTION FOR OBD2 MODE: Speed, RPM, water temperature, voltage, fuel consumption, clock, single travel distance, single travel time, oil temperature, turbine pressure, acceleration test, brake test, overspeed alarm, engine failure alarm, elimination of fault code, water temperature alarm , speed alarm, voltage alarm, mile switch, fatigue driving reminder, automatic and manual brightness adjustment..
  • TWO INSTALLATION METHODS: This installation methods of the digital GPS speedometer are simple and diverse. You can place it directly in front of the car's center console, or use the tape that comes with to tie it to the car. The smart ga....
Check Stock

4MS QCD Quad Clock Distributor V2 Eurorack Synth Module

  • Four CV-controlled Clock Divider/Multipliers.
  • Tap tempo button and five sync'ed clock outputs make the QCD perfect for head-of-the-chain "Master" clock module.
  • Tap clock output runs at the tapped tempo (even if other channels are being clocked externally).
  • Create complex rhythmic patterns by patching multiple channels into each other's Div/Mult CV and Reset.
  • Each of the four channels has an independent clock IN, OUT, Reset and Div/Mult CV.
Check Stock

Basic 16x2 Character LCD - RGB Backlight 5V

  • DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
  • 4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
  • CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
  • COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
  • WIDE APPLICATION: This module is suitable for Raspberry Pi 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..
Check Stock

Car Dashboard Clock/Automotive Clock - Analog 12v Car Clock with LED Backlight Set - Round Quartz Automobile Clock for Classic, Vintage, Race or Muscle Cars - Retro Car Accessories

  • AUTHENTIC CLASSIC CAR ACCESSORY - Our retro style car dash clock represents the time when cars were at the forefront of technological progress. Just feel the spirit of the seventies with our vintage car accessories clock.
  • REPAIR AND RESTORATION CAR CLOCK SET - Probably one of the best vehicle clock set for car lovers. In addition to car analog clock, you get 12V led light lamp with T4W lamp holder, wires, and connectors with silicone covers for stress-free installation.
  • CLASSIC AND RETRO STYLE DESIGN - Our clock for car dashboard goes well with any old style vehicle. Use our car analog clock with backlight while repairing and restoring old car models, vintage, retro cars, race and muscle cars or even SUV or MPV.
  • CAR CLOCK WITH LIGHT: This 12 volt car gauge clock gives out glimmer light in the dark so you can read the clock efficiently without turning on any other lights. Installation scheme allows the backlight to switch on automatically after activation of the ignition.
  • HASSLE-FREE GUARANTEE: If you do not love our clock for cars, just let us know, and we will make replacement free of charge or refund your money. Satisfied and happy customers are the highest priority for us.
Check Stock

Supco Q103 Sequencer

  • Choose between Eurorack power, FRACK power (panel is still Eurorack format), or 9V battery/wall plug.
  • Coarse & fine clock adjustment - Switchable linear 'random' function with speed adjustment - Momentary & Hard Hold Function - Manual Step Button - Internal/External Clock Switch - Reset Input Jack - Current draw is 20mA - Size: 3U 20HP - Module depth (Eurorack version): 1.5 inches.
  • 3 CV Outs, each with their own attenuator, 0-5 volt output..
Check Stock

Key Display for AVR 8-Bit Digital LED Tube 8-Bit TM1638 Module

  • DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
  • 4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
  • CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
  • COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
  • WIDE APPLICATION: This module is suitable for 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..
Check Stock

KOOKYE Robot Tank Car Kit Tank Chassis Platform Metal Stainless Steel 2DW Motor for Arduino / Raspberry Pi DIY (Silver Tank Chassis)

  • The KOOKYE robot tank platform is designed for learning robotics electronic car with arduino or raspberry pi programming. You can add robotic arm or robotics HD Camera on this robotic car platform for DIY..
  • The robotic tank car chassis contain extra-large size stainless steel car body and a variety of subplates for DIY. With 1 pairs drving wheels and 5 pairs carrying wheels, it make walk more easily on complex ground conditions..
  • This product only contains tank chassis.If you are an intermediate player and have time to read our code comments,you can buy the robotic car chassis platform andour tank electronic parts kit,then you can easily customize this robotic tank car to make your own project for science fair, college home work or even commercial applications..
  • The tank car chassis kit and the electronic parts kit can be purchase separately for your DIY.The electronic parts kit contains module parts including: Ultrasonic Sensor module, Tracking module, Infrared Remote Control, Bluetooth module and WiFi Expansion board etc. With these modules, the robot car can work in multiple modes such as auto-go, infrared control, obstacle avoidance, line tracking. You can use our Android APP to change working mode through Wifi or Bluetooth..
Check Stock

IQQI Car Thermometer - Reads Inside & Out Temperature Celsius and Fahrenheit Conversion

  • 【Temperature Measurement Range】Car Thermometer Temperature Measurement Range:Indoor temperature measurement range is ‑30℃ ‑ +50℃, and the....
  • 【Multifunctional】Car Digital Clock,Double probe, can detect indoor and outdoor two temperature, Celsius, Fahrenheit temperature conversion, with....
  • 【Size】Vehicle Digital Clock size specifications for your reference:Display Size: Approx. 33x12mm/1.30x0.47in,Outdoor Extension Line Length:....
  • 【Package List】Car Temperature Digital Clock Package List:1 x Car Temperature Clock,1 x User Manual.strictly follows the factory's production....
  • 【High Quality Material】Car temperature digital clock is made of high quality ABS material, wear resistant, anti aging and durable.High-quality Car....
Check Stock

Kakalote Car Solar Powered LCD Clock,Stick-On Luminous Car Clock,Temperature Display Car Dashboard Clock Green

  • 【Solar Powered】The car clock features the rechargeable battery whose power supply is solar powered mode, and it features the high-quality solar....
  • 【Practical Car Digital Thermometer】The car dashboard clock features the vibration sensor for automatic switch on and off.The package contains an....
  • 【Practical in Use】The car clock features the vibration sensor for automatic switch on and off, and the clock automatically detects the vibration....
  • 【Shading Hood Design】The design of the hood can effectively reduce the interference of strong light during the day, at night, the car clock can....
  • 【Brightness Adjustment】The car clock features the high temperature LED digital tube display, daytime and nighttime are clearly visible, with....
Check Stock

Synthrotek, Erica Synths Swamp DIY Kit

  • The SWAMP is a random CV and audio generator inspired by the famous Wiard Wogglebug module..
  • External audio input routed to ring modulator..
  • Clock input and output to sync the module to your modular system.
Check Stock

Novinex Car Clock Digital Solar Powered Car Electronic Clock Stick-On Luminous Car Clock Dashboard Auto Clock Car Watch Clock with Adjustable Brightness Date Temperature

  • 1.Solar Powered Design: The car clock features the rechargeable battery whose power supply is solar powered mode, and it features the solar panel +....
  • 2.Practical in Use: The car clock features the vibration sensor for automatic switch on and off, and the clock automatically detects the vibration....
  • 3.Heat Resistan t Shell: The shell of the car clock is made of high temperature resistan t material, which makes the clock suitable for the internal....
  • 4.Brightness Adjustment: The car clock features the high temperature LED digital tube display, daytime and nighttime are clearly visible, with....
  • 5.Shading Hood Design: The design of the hood can effectively reduce the interference of strong light during the day, at night, the car clock can....
Check Stock

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

  • -Arduino MEGA R3 (generic high quality) + USB cable -6xAA Battery holder (9VDC) -WiFi ESP8266 module -Model Bluetooth Master / Slave HC-05 -Box with plastic cells (organizer of components) -Shield for prototypes + Mini-Breadboard -Large Breadboard (830 points ) -Dupont Cables 10 * Female-Female + 10 * Male-Female + 10 Male-Male -Cable Jumper for breadboard -6 Push Buttons with multicolored caps -Joystick Module type PS2.
  • -RC-522 RFID Module with white RFID Card and RFID Keychain -High-precision RTC Real-Time Clock Module DS3231 and EEPROM AT24C32 -PIR Presence Sensor HC-SR501 -Distance measurement module HCSR04 -Sound sensor detector module with programmable threshold -LM35 temperature sensor -Tilt detector module -Servo SG90 motor -Stepper motor (5V) -Motor driver module for stepper motor ULN2003.
  • 5V Active Buzzer -5V Passive Buzzer -LCD 1602 16 characters * 2 lines -LED Display Driver MAX7219 -LED Matrix Display of 8*8 -7 Segments Display 1 digit -7 Segments Display 4 digits -Simple Relay Module - Infrared Remote Control 38kHz - 38kHz Infrared decoder receiver (type 1838) - Infrared phototransistor (Flame sensor) - Infrared LED - Light sensor (Photoresistor).
  • -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 *....
Check Stock

QPKING X95 GPS Slope Meter Car Inclinometer Level Tilt Gauge, Car HUD GPS Speedometer MPH Car Electronic Compass Clinometer Indicator, Digital Inclinometer Car Angle Slope Meter for Off-Road Vehicle

  • [Multi-function]: It supports vehicle inclination, pitch angle, longitude and latitude coordinates, satellite positioning, altitude, speed display, supply voltage, time display, driving distance, over speed alarm and etc..
  • [Color HUD Display&Light Sensor]: AUTOOL X95 GPS Car Digital Inclinometer uses a color high-definition screen, the picture is stronger and clearer. Adjust the brightness of the screen by using the sensitivity of the light sensor which will improve visibility greatly..
  • [Alarm System & GPS Module]: when vehicle pitch angle or tilt angle is over 40 degree the alarm alerts. Also equipped with high- precision satellite GPS signal module ,Widely applicable to Asian cars, American cars, European cars..
  • [Settable parameters]: Speed unit setting (MPH&KM/H), over-speed alarm setting, speed adjustment setting, clock adjustment setting, font color setting..
  • [3-YEAR WARRANTY]: For damage caused by non-human factors, AUTOOL promise to resend parts for free within 3 years. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours..
Check Stock