Categories

Best Car Dual Channel Amplifiers

Scosche LOC2SLSD Car Stereo 2-Channel Adjustable Amplifier Add-On Adapter

  • ADD SUBWOOFERS: Works with high power car stereos (up to 80 watts per channel) to add subwoofer systems to any car stereo..
  • EASY TO INSTALL: Provides amplifier remote turn on output without removing car stereo..
  • OUTPUT CONVERSION: Converts car stereo speaker wire outputs to RCA Cable outputs..
  • ADDITIONAL CHANNEL: Allows the addition of 2-channel or mono amplifiers to factory or aftermarket stereos..
  • CONTROLLER: Includes mountable remote control with knob for adjusting subwoofer bass audio level from the dash..
  • REQUIRED FOR USE: You must have an aftermarket amplifier in order to use this product..
Check Stock

Massive Audio EX44 - Car Audio 800 Watt, 200w x 4 RMS, Nano Edge Series, 4 Channel Car Amplifier, Bass Boost

  • HIGH PERFORMANCE CAR AUDIO AMPLIFIER | One of the best values you will find for a car amplifiers for cars in the market! This 12v car amplifier features: 100w x 4 RMS @ 2/4 Ohm / 400w x 2 MAX, Freq: 10Hz - 25KHz, 0~12dB, .
  • PRODUCES POWERFUL, CLEAN, FULL SOUND | Don't settle for weak sounding or underperforming car amplifiers. Your car audio system would not be complete without our multi-channel Massive amplifier. This car audio amplifier features: Built-in OEM line converters with RCA inputs that can take a high level speaker signal at up to 10 Volts directly in. Input Level 0.4V - 10V Hi Inputs or Low Inputs..
  • QUALITY TESTED AND GUARANTEED TO ALWAYS REACH ITS RATED POWER | Get more wattage and quality sound for less money! That is our guarantee! You don't need to set the gains to low to avoid distortion. These car amplifiers provides high power with low efficiency. Also, by sensing the DC offset of a factory radio it can activate the ATO (Auto Turn On) feature and Next Generation Advanced 5 Way Protection Circuitry....
Check Stock

Line 6 Catalyst,Black,60-Watt, 1x12

  • 60-watt, dual-channel 1x12 combo amp (with optional LFS2 footswitch).
  • Catalyst 60 is a 60-watt, dual-channel 1x12 combo amplifier that performs like a traditional guitar amp—while providing the increased versatility of a modern amplifier..
  • The smallest and lightest member of the Catalyst family—which also includes the Catalyst 200 and Catalyst 100 amplifiers—the versatile Catalyst 60 is at home in the practice room, the studio, and even small venues..
Check Stock

2X 250W Class D Audio Amplifier Board Amplifier IC IRS2092 Sure AA-AB32291

  • It integrates high performance IRS2092 supporting dual channel audio amplification. Both of channels.
  • Both of channels are capable of outputting nominal power simultaneously and continuously. It’s suitable for amplifier enthusiasts or hobbyists to finish a complete amplifier system..
  • high performance inductors are used to gain the perfect timber, finally realize high S/N ratio, low THD+N, wide frequency response range etc..
  • Applications: Home theater receiver Car audio Background music systems Musical instrument amplifiers Prototype for recording studios, Post-production, Live sound and Hi-Fi applications PA system.
Check Stock

Scosche LOC2SL Car Stereo 2-Channel Audio Adjustable Amplifier with Add-On Adapter and Remote Control Knob and High Current Single Amp Kit Bundle

  • 17ft Twisted Pair audio cable and 20 ft. of Speaker Wire.
  • ADD SUBWOOFERS: Works with high power car stereo speakers, up to 80 watts per channel, to add subwoofer system to any car speaker system.
  • EASY TO INSTALL: Provides amplifier remote to turn on output without removing car audio system.
  • OUTPUT CONVERSION: Converts car stereo speaker wires output to RCA Cable outputs.
  • ADDITIONAL CHANNEL: Allows the addition of 2-channel or mono amplifiers to factory or aftermarket car stereo kit.
Check Stock

Massive Audio P8 Primo Series. 3,500w RMS / 7000w MAX, 0.5 Ohm Stable, Class D, Monoblock Mega Car Amplifier with Bass Boost & Clip LED

  • HIGH POWER CAR AUDIO AMPLIFIER: These high quality amplifiers are extremely powerful! This 12 volt car audio amplifier features: 1400 x 1 RMS @ 2 Ohm / 7000w x 1 Peak Power, Freq. Response 10Hz - 220Hz, Built-In OEM Line Converter, Bass Boost 0dB~12dB. Our monoblock amplifiers for cars, boats and off road vehicles provide rich clean power for your subwoofers!.
  • PRODUCES POWERFUL, CLEAN, FULL SOUND: Our amplifiers are very efficient and powerful and provide you with a real value that you can hear for yourself. Our mono car subwoofer amplifier features: Built-in OEM line converters with RCA inputs that can take a high level speaker signal. This Primo P8 incorporates a clip liit switch that allows up to 16.5 Volts plus a Parametic EQ with 0 - 12 dB Bass Boost for even more customization..
  • QUALITY TESTED AND GUARANTEED TO GO BEYOND RATED POWER: Hits its full power or more all the time! That is our guarantee! You don't need to set the gain to low to avoid distortion. Also, by sensing the DC offset of a factory radio it can activate the Built-In (ATO) Auto Sensing Turn On Function (Hi-Low Converter).
  • GREAT QUALITY PRODUCT THAT WILL LAST LONGER: Don't settle for underpowered and underwhelming car stereo monoblock amplifiers! With our extra features like 12V Rem....
Check Stock

Scosche LOC90 Line Output Converter Adjustable Amplifier Add On Module for Car Stereo, 2-Channel Signal Sensing Speaker Wire to RCA Adapter with Remote Control Knob, Grey

  • Subwoofer - This DIY speaker kit is a convenient speaker wire to subwoofer adapter. The RCA line output converter for subwoofer makes it easy to hook up to an amplifier and set up a subwoofer system in any car.
  • RCA Converter - Speaker level to line level converter allows the addition of 2-channel or mono amplifiers. Independent left and right channel level adjustments provide the perfect sound balance. Includes signal sensing 12V remote turn-on output.
  • External Controller - Includes mountable remote control knob for adjusting subwoofer bass audio level from the dash. This remote bass knob lets you control the level of sound with convenience. No reason to pull over and manually adjust the amplifier.
  • Buy with Confidence - Backed by Scosche’s Lifetime Tech Support and Limited Lifetime Warranty.
Check Stock

PowerBass Party Pack - Dual 12" Subwoofers in Vented Enclosure with ASA3-400.2 Amplifier and Wiring Kit

  • The PowerBass Party Packs are the bass packages your vehicle needs. Perfectly matched Amplifiers, Subwoofers, Enclosures and Wiring Kits to give any vehicle some low end thump..
  • This bundle includes a PowerBass PS-WB122 - 12" Dual Loaded Ported Enclosure, a PowerBass ASA3-400.2 - 400 Watt Amplifier, and an 8 gauge wiring kit..
  • PowerBass PS-WB122 - 12" Dual Loaded Ported Enclosure.
  • 2-Channel 400 Watt High Efficiency Class A/B Design.
Check Stock

AudioSource Analog Amplifier, Stereo Power A Amplifier AMP100VS for Home Sound Systems

  • POWER YOUR SOUND SYSTEM: 2 Channels rated at 50 watts into 8 ohms. 60 watts RMS per channel at 4 ohms. Bridge Output: 150 Watts at 8 ohms..
  • HIGHLIGHTS: 5-Way Binding Posts. A/B Speaker selector. Auto Signal Sensing Power On. Dual Auto-Switching Inputs. Independent level and balance controls. Rear mounted treble and bass controls. Front panel diagnostic LEDS..
  • AUTOMATICALLY KNOWS WHEN TO TURN ON: This amplifier is audio sensing, meaning it automatically turns on when you start your system..
  • PERFECT FOR ANY HOME AUDIO SYSTEM: Our stereo amplifiers are great for home theaters and outdoor systems. Enjoy professional quality audio in the comfort of your own home..
  • SPECIALLY DESIGNED FOR MULTIPLE ROOMS: Our amplifiers allow you to deliver high quality sound and power to multiple rooms for the ultimate surround sound experience..
Check Stock

Neewer 1-Button Footswitch with 1/4” Mono Male to Male Cable, Ideal for Guitar Bass Amplifiers

  • 【1-Button Footswitch】 Connect the single-button footswitch to a standard mono 1/4” input using the 1/4” mono male to male cable. Perfect for novice and professional musicians.
  • 【Channel Switching】 A handy channel switcher for guitar, bass. Compatible with a wide range of guitar amps with on/off switching capability.
  • 【Control the Circuit】 The push-button switch and the included 1/4” mono to 1/4” mono cable make it easy to connect or break the circuit remotely. Also works with any standard audio cables with 1/4” mono plugs.
  • 【Metal Button】 The button is made of metal to provide durability.
  • 【Notes】 This footswitch can be used with guitar amplifiers that feature footswitch connection (a 1/4” jack). It controls only a single channel (not dual channels). The guitar and the stool shown in the pictures are not included.
Check Stock

Huntington Radio Motor 2A with Vintage Overlay

  • Built-in Bluetooth for hands-free phone operation and wireless streaming Plus Wireless browsing..
  • One rear-mounted USB ports allows playback of MP3, WMA, and FLAC digital music files Plus Two auxiliary inputs for portable devices.
  • 25 watts x 4 channel RMS power amplifier Plus dual RCA pre-outs for external amplifiers..
  • Authentic push-button styling With 32,000 color display.
Check Stock

2 Kicker 44CWCD104 CompC 10 1000w 4-Ohm DVC Car Subs+Mono Amplifier+Amp Kit

  • Package Includes: (2) KICKER 44CWCD104 CompC 10" Dual 4-Ohm Car Audio Subwoofers Totaling 1000 Watt. (1) Rockville RXD-M1 2000w Peak/500w RMS Mono 1....
  • Features of 44CWCD104: KICKER 44CWCD104 CompC 10" 500 Watt Dual 4-Ohm Car Audio Subwoofer Sub CWCD104. Dual Four-Ohm Voice Coil. Injection-Molded....
  • Features of RWK41:� 1 � 17� High Grade Twisted Pair of 100% Copper RCA Cable. 17� � 4 Gauge Translucent Blue SuperFlex Power Cables. 17�....
  • Features of RXD-M1: Rockville RXD-M1 2000 Watt Peak/500 Watt Dyno-Certified RMS Mono 1 Ohm Amplifier Car Audio Amp. Dyno Certified RMS Power Ratings:....
Check Stock

NAD Electronics C165BEE Stereo Preamplifier with Phono Section

  • As a VU meter, with dual 60*35mm large meter, can dynamically decorate audio environment and provide incomparably visual effects when switching audio signals..
  • As an audio switcher, easily to switch between two amplifiers and 2 pair of speakers, no need to plug in and out cables repeatedly to avoid wearing the contact point of the sockets..
  • Powerful design and strong compatibility: all channels adopt fully isolation design, each channel's GND is independent without mutual interference. Supports all kinds of amplifier such as BTL / class A / class B / class D digital amplifier / tube amplifier etc..
  • Easy Use & Perfect Details: Powered by micro-USB 5V, with built-in protection load for speakers. With remote control, can quickly set the working status from distance. All settings can be saved after shutdown, more convenient to use..
  • Proper size with exquisite appearance: cool black case, warm VU meter and clear indicators looks vintage and dynamic, can perfectly match with a variety of usage scenarios, very suitable for audiophiles who have more than one amplifiers or speakers..
Check Stock