Categories

Best Car Header

MEIRIYFA USB Header Extension Cable, USB 2.0 9-Pin Male to 9-Pin Female Internal Motherboard Header Cable for USB Ports, Expansion Cards and Motherboard Ports 20.3 inches（2 Pack)

  • 【Applicability】: USB 2.0 9-pin male to 9-pin female internal motherboard header cable, jumper to reduce and eliminate stress on rear USB expansion board or front panel USB ports as well as expansion card and motherboard port connections..
  • 【Extendibility】: The USB 2.0 header extension cable extends your 9-pin USB IDC motherboard header cable length by 20.3inch/515mm, which is more convenient and efficient..
  • 【How to use】: Connect the motherboard USB 9-pin header port to the 9-pin front panel of the PC case. USB enclosure to motherboard header cable, USB internal header cable, USB header cable..
  • 【Safety】: The 9-pin USB 2.0 header protects against short circuit socket design, which can prevent the risk of accidental removal of the circuit board, pins and case short circuit..
  • 【Material】: The 9-pin jumper has a flexible PVC sheath, which is flexible and environmentally friendly, which greatly improves its durability and life..
Check Stock

Bestop 5123801 No-Drill Header Windshield Channel for 1997-2006 Wrangler TJ

  • Durable shaped steel construction more tools. For Header Bikinis, these channels fit part numbers 52525, 52528, 52531, 52532 and 52544.
  • Uses factory windshield header latch points.
  • latch bolts included. It fastens into factory header latch holes and the Bikini top fits into the windshield channel.
  • Required to mount Header Channel style Bikini Top.
Check Stock

MasterTop Ultimate Summer Combo in Black Twill Fabric| Fits 1997-2002 Jeep TJ Wranglers|Bimini Plus Top, Wind Stopper Plus and Tonneau| Requires Header channel & Dr Surrounds for install|14814224

  • Each MasterTwill Summer Combo includes a Bimini Plus Top a full wrap around Wind Stopper Plus roll bar curtain with zip down window and a Tonneau cover with zipper attachment to the Wind Stopper.
  • All Summer Combos require factory style soft top door surrounds, A windshiled header and a tailgate bar for installation If you have a hard top you will need to purchase door surrounds, windshiled header and tailgate bar.
  • Each Combo kit is constructed of durable three-layer, 30 oz. woven MasterTwill fabric for the ultimate look and performance.
  • Bimini Plus Top covers to the rear of the vehicle over the driver and back seat passengers cabin and Cable style attachment ensures a tight wrinkle free fit.
  • Wind Stopper plus wraps around the door surrounds sealing off the side of the roll bar but this top is not water tight and should not be sent through an automatic car wash.
Check Stock

CY USB 3.1 Front Panel Socket to USB 3.0 20Pin Header Male Extension Adapter for Motherboard

  • Connector1: USB 3.0 Front Panel Socket / Connector2: USB 3.1 Front Panel Header.
  • The adapter is a converter to convert the available USB 3.0 header of a motherboard into a USB 3.1 header. Thus the USB 3.1 port of a housing can also....
  • Even the most up-to-date motherboards with AMD AM4 or Intel 2066 sockets are not always equipped with a USB 3.1 header. The adapter is the perfect....
  • The small converter is plugged into a USB 3.0 header that provides two USB 3.0 lanes. Thus, two data lines with 5 Gbps each are available, which are....
  • The converter thus provides a full-fledged USB 3.1 port..
Check Stock

TWOPAGES Isabelle Linen Custom Curtain Drapery for Living Room, Bedroom (Isabella)

  • Sole per panel. Made of 15% cotton, 20% linen and 65% polyester, natural linen look. Drapery unlined. Heavyweight 500 gsm. Sunlight shading rate 85%..
  • WIDTH: For pinch pleat, goblet header, panel width is the width after pleats already set, we recommend 1.0-1.1 times wide of your curtain rod or track. For tab top and rod pocket header, we recommend fullness ratio 1.0-1.2 times wide of your curtain rod. For grommet header, we recommend fullness ratio 1.5-2 times to create the waves and folds when close the curtains. For flat hook and back tab header, we recommend fullness ratio 1.25-2 times wide of your curtain rod..
  • LENGTH: For grommet, rod pocket, back tab and tab top header, measure from the top of rod to where you want the bottom of the drapery to be (1/2″ above the floor, or approximately 6″ to 8″ below the window sill ). This is your finished top of pole to hem drop. For flat hook, pinch pleat and goblet header, measure from bottom of rings to top of floor or top of window sill, depending on desired window coverage. Subtract 1/2″ to get the panel length you need..
  • Fit for living room, bedroom, patio door, club, hospital, room divider..
  • Easy Care: Machine washable in cold water, use only non-chlorine bleach when needed, tumble dry l....
Check Stock

TWOPAGES Liz Linen Curtain Linen Drapery Panel for Living Room Bedroom Patio Door (Custom)

  • FABRIC: Sold per panel, not a pair. 80% Polyester, 20% Linen. Heavyweight 350 gsm faux linen material. Skin-friendly, excellent colorfastness..
  • WIDTH: For pleated, goblet header, panel width is the width that pleats are already set, we recommend fullness ratio 1.0 time wide of your curtain rod or track. For tab top and rod pocket header, we recommend fullness ratio 1.2-1.5 times wide of your curtain rod. For grommet header, we recommend fullness ratio 1.5-2 times to create the waves and folds when close the curtains. For flat hook and back tab header, we recommend fullness ratio 1.25-2 times wide of your curtain rod..
  • LENGTH: For grommet, rod pocket, back tab and tab top header, measure from the top of rod to where you want the bottom of the drapery to be (1/2" above the floor, or approximately 6" to 8" below the window sill ). This is your finished top of pole to hem drop. For flat hook, pinch pleat and goblet header, measure from ring eyelets to the floor. Subtract 1/2" to get the panel length you need..
  • Fit for living room, bedroom, patio door, club, kitchen, hospital, room divider..
  • Machine washable for the unlined, white darkening or 90% blackout lining, in cold water and gentle circle. Dry clean suggested for privacy or thermal blackout l....
Check Stock

Gigabyte LGA 1155 Intel Z77 HDMI SATA 6 Gb/s USB 3.0 Micro ATX Intel Motherboard GA-Z77M-D3H-MVP

  • ...ATA 6Gb/s connectors. 4 x SATA 3Gb/s connectors. Support for RAID 0, RAID 1, RAID 5, and RAID 10..
  • USB: Up to 10 USB 2.0/1.1 ports. Up to 4 USB 3.0/2.0 ports..
  • Internal I/O Connectors: 1 x 24-pin ATX main power connector/1 x 4-pin ATX 12V power connector/2 x SATA 6Gb/s connectors/4 x SATA 3Gb/s connectors/1 x CPU fan header/2 x system fan headers/1 x front panel header/1 x front panel audio header/1 x S/PDIF Out header/1 x USB 3.0/2.0 header/3 x USB 2.0/1.1 headers/1 x serial port header/1 x parallel port/1 x Trusted Platform Module (TPM) header/1 x Clear CMOS jumper.
  • Back Panel Connectors: 1 x PS/2 keyboard/mouse port/1 x D-Sub port/1 x DVI-D port/1 x HDMI port/2 x USB 3.0/2.0 ports/4 x USB 2.0/1.1 ports/1 x RJ-45 port/3 x audio jacks.
Check Stock

RED LAVA EXHAUST PIPE HEAT WRAP 2 x 50 MOTORCYCLE HEADER INSULATION

  • LEDAUT 2 Roll 2" x 50' Titanium Exhaust Heat Wrap Roll for Motorcycle Fiberglass Heat Shield Tape with Stainless Ties.
  • Before installing, soak the header heat wrap in water so that the fiberglass will not flying about. Wear gloves to avoid itching. Wrap it around your....
  • High resistance to abrasions, oil spills, temperatures and vibration breakdown..
  • The exhaust heat wrap tape can withstand 1800F direct/2500F radiant heat..
  • The thermal heat wrap reduces heat under hood up to 50% and improving car And motorcycle Performance.
Check Stock

USB Front Panel Adapter, JoyReken Vertical USB C Header Adapter, USB 3.1 Type-E Key-A to USB 3.0 20Pin Header Converter for Type C Motherboard

  • Supports all motherboards with USB 3.0/ 3.1 19-pin header.
  • Motherboard: USB 3.0 Internal 19 Pin MB Male Housing Header.
  • Front Panel: USB 3.1 A-Key 20 Pin Front Panel Female Header / NOTE: Does not convert from 5GB/s to 10GB/s.
  • Easy way to access USB-C and support front panel header, doesn't require to have latest motherboard to experience USB-C technology..
  • ** Note on USB current over limit issue: The power from the USB 3.0 header on the motherboard has a power rating at 4.5W (0.9A x 5V). However, many USB-C devices can withdraw power up to 100W (20A x 5V). This may result in a power shut down to protect the motherboard and its components..
Check Stock

Goliton USB 3.1 Front Panel Header to USB 3.0 20Pin Header Extension Cable 20cm Compatible for ASUS Motherboard

  • USB 3.1 require a different front panel header than USB 3.0.
  • The USB 3.1 port interface is using the USB 3.0 pin set and more.
  • It is design to be backwards compatible (will explain later).
  • There are no official release of the specs for the USB 3.1 header yet (as of this writing), But first motherboard with this is the ASUS ROG MAXIMUS IX....
  • Connector1: USB 3.0 Front Panel Header. Connector2: USB 3.1 Front Panel Header..
Check Stock

VHT Satin Clear Header Paint

  • Genuine Mopar Header Orange Touch Up Paint.
  • Mopar Header Orange Touch Up Paint - 5163996AB - Part#5163996AB.
Check Stock

Jones Exhaust AHB2

  • 3.00 Inch Header Buddy Collector Kit 3.00 Inlet 2.25 Outlet 3 Bolt Flange Jones.
  • 2 Flanges 2 Collectors and 6 Nuts and Bolts Included.
  • HEADER BUDDY Is An Innovative, New Design For Header/Exhaust Assembly That Requires NO GASKET.
Check Stock

Xiwai USB 3.1 Front Panel Header to USB 3.0 Type-A Female Extension Cable 50cm Panel Mount Type

  • USB 3.1 Front Panel Header to USB 3.0 Type-A Female Extension Cable 50cm Panel Mount Type Length: 50cm.
  • USB 3.1 require a different front panel header than USB 3.0..
  • The USB 3.1 port interface is using the USB 3.0 pin set and more. It is design to be backwards compatible (will explain later). .
  • There are no official release of the specs for the USB 3.1 header yet (as of this writing),  But first motherboard with this is the ASUS ROG MAXIMUS....
  • Connector1: Type-A USB3.0 Female Connector2: USB 3.1 Front Panel Header.
Check Stock