Categories

Best Car Multichannel Amplifiers Mosfet

CT Sounds AT-500.1D 700 Watt Class D Competition Mono Amplifier Car Audio

  • Mono amplifier with 500 watts RMS power at 1-ohm load (12.8v).
  • Frequency response: 10Hz to 250Hz (Bass Knob Included).
  • Equipped with 4-way protection circuitry along with a Diode 6A60 for reverse polarity protection.
  • sleep easy at night knowing your car audio amplifier is protected.
  • Built using an advanced PCB board featuring Korean capacitors, high quality transformers and cutting-edge inductors to ensure this car amplifier class d delivers the power you need to destroy the competition in the SPL lanes.
  • Internal wiring features 8AWG OFC cables for enhanced electric current allowing this car amplifier monoblock to deliver louder, cleaner, and more punchy power than other car mono amplifiers in its class.
  • Heavy duty heat sink design, high power MOSFET switching technology, and silicon utilized throughout the internal components will ensure the class d amplifier car audio runs cool for even the most demanding playlists.
Check Stock

Harmony Audio HA-A1500.1 Car Stereo Class D Amp Mono 3000 Watt Subwoofer Amplifier - 1 Ohm Stable - Includes Bass Remote

  • Power – 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms.
  • Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Check Stock

Hifonics 4 Channel Car Amplifier – Class A/B Gemini Series Multichannel Amplifier 1400 Watt Car Electronics Audio Subwoofer 2 Ohm Stable Bass Boost MOSFET Power Supply for Speakers Sub Amp

  • ...annel bass boost car amplifier has features like - Frequency Response: 10-22KHZ, Bass Boost, Remote Bass Knob, 2-way protection, variable low pass crossover: 40Hz-300Hz, variable high pass crossover: 40Hz-300Hz, subsonic filter:10Hz-40Hz, phase shift:0-180 degree, and ultra-fi mosfet power supply.
  • Class A/B – This multichannel subwoofer car amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 4 channel car amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • RCA Ports - The RCA Jacks in this bass boost car amplifier allows you to develop multiple amplifier systems without using any splitter cords. The subwoofer amplifier thus puts you at ease as you just have to bring one set into the first amp and then use the line out rca jack to feed the next amp..
Check Stock

BOSS Audio Systems Elite BE1500.1 Monoblock Car Amplifier - 1500 Watts, 2 4 Ohm Stable, Class AB, Mosfet Power Supply, Great For Subwoofers

  • POWER: 1500 Watts Max x 1 @2-Ohms, 750 Watts Max x 1 @4-Ohms.
  • CLASS A/B TOPOLOGY: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • MOSFET POWER SUPPLY: A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss And eliminating all secondary feedback circuitry.
  • VARIABLE LOW-PASS CROSSOVER: Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • SWITCHABLE BASS BOOST: Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

Pump Boys and Dinettes

  • Power – 450 Watts Max x 4 @2-Ohms, 225 Watts Max x 4 @4-Ohms, 900 Watts Max x 2 Bridged @4 Ohms.
  • Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Mosfet Power Supply – A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
  • Variable BASS Boost – With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s).
  • Bridgeable – Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels.
  • Specs – Dimensions: 13.5” x 10.31” x 2.25, Weight: 12 lbs..
  • Warranty – BOSS Audio Systems provides a powerful 6-year Platinum Onli....
Check Stock

BOSS Audio Systems PT1000 2 Channel Car Amplifier - 1000 Watts Full Range Class A/B 2-8 Ohm Stable Mosfet Power Supply Bridgeable

  • Power - 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms.
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Check Stock

BOSS Audio Systems PF1800 4 Channel Car Amplifier - 1800 Watts Full Range Class A-B 2-4 Ohm Stable Mosfet Power Supply Bridgeable

  • Power - 450 Watts Max x 4 @2-Ohms, 225 Watts Max x 4 @4-Ohms, 900 Watts Max x 2 Bridged @4 Ohms.
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Mosfet Power Supply - A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Check Stock

BOSS Audio Systems PM1500 Monoblock Car Amplifier - 1500 Watts 2/4 Ohm Stable Class A/B Mosfet Power Supply Great for Subwoofers

  • Power - 1500 Watts Max x 1 @2-Ohms, 700 Watts Max x 1 @4-Ohms.
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
Check Stock

Hifonics 7 BAND EQ WITH CROSSOVER

  • CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining the highest sound quality sound for your car audio..
  • BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth..
  • MADE TO LAST - Low noise preamplifier generates maximum low voltage signal from source unit, minimizing distortion. High temperature impact resistant inputs with hex screw terminals allow secure connections and are erosion resistant..
  • HIGH QUALITY CONNECTIONS - RCA outputs and a daisy chain multiple amplifier build eliminates additional signal cables from the source unit. Molded secure connections are used for all wires and angled for ease of access during installation..
  • CLASSIC HIFONICS LOOK - The ZXX Series maintains the classic feel of Hifonics amplifiers and include an illuminated logo on the front of the amplifier. The Hifonics logo illuminates when the amp is powered, making a statement even in the dark..
Check Stock

BOSS Audio Systems MODEL R1600M Car Amplifier - Model 1600W High Output Amp, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Great Amp for Subwoofers

  • POWER: 1600 Watts Max x 1 @2-Ohms, 800 Watts Max x 1 @4-Ohms.
  • CLASS A/B TOPOLOGY: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • MOSFET POWER SUPPLY: A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • VARIABLE LOW-PASS CROSSOVER: Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • VARIABLE BASS BOOST: Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

Workout 2018 - Aerobic Hits. Music For Fitness and amp; Workout 128 Bpm / 32 Count

  • ADVANCED TECHNOLOGY: The professional series amplifiers are designed to incorporate DC to DC switching power supplies that provide headroom for even the most demanding peaks and dynamic ranges found in today's audio files.
  • INTELLIGENT DESIGN: The car audio amplifier features include power and protection LED indicators.
  • SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. Silver RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound.
  • RCA JACKS: The line-out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
  • AUDIO EVOLUTION: This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage. Excellent frequency response rates place these amps in a class of their own.
Check Stock

BOSS Audio Systems R1100M Riot Series Car Audio Subwoofer Amplifier - 1100 High Output Monoblock Class A/B 2/4 Ohm Stable Low/High Level Inputs Low Pass Crossover Mosfet Power Supply Stereo

  • Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms.
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
Check Stock

Pioneer DEH-S4250BT Car Audio Stereo CD Player Receiver with Bluetooth Aux USB

  • 1-DIN CD tuner with Bluetooth USB connection hanks to the unique Advanced Sound Retriever technology of Pioneer, the sound quality comes as close as possible when playing back the original recording.
  • Spotify and Pioneer Smart Sync app Compatible with Apple and Android smartphones.
  • radio, CD MP3 USB Auxiliary Bluetooth headunit, plays Android.
  • 13-band graphic equalizer High pass filter Low pass filter Direct Sub Drive Subwoofer control RDS PTY, Best Station Memory..
  • The DEH-S420BT is a true high-end car radio. It plays FLAC files and offers a 13-band graphic EQ as well as an integrated MOSFET amplifier with 4 x 50 watt. You can easily connect a subwoofer and/or other amplifiers with additional loudspeakers via the 2 cinch pre-amplifier outputs..
Check Stock