Categories

Best Car Shocks And Struts

ARANA 7 inch 18 lb/80 N Gas Struts Spring Shocks Lid Stay Hinge, 7" 80N Gas Props Struts for Cabinet Toolbox Lid Utility Job Toy Tool Box with Ball Studs

  • ✅ 7 inch gas spring struts - Extended Length: 7"(180mm), Compressed Length: 5.12"(130mm), Package include: 2 struts, 4 mounting brackets and 10 Screws. No need to buy other mounting hardware.
  • ✅7 inch 18lb lift support hinges - Perfect soft open close gas struts for cabinets, tool box, toy box, job box, utility box, display table, etc..
  • please make sure your lid weighs between 14 and 20 pounds.
  • ✅ 7 inch gas spring shocks for cabinets - The lid stay can help your cabinet door/toolbox/toy box/storage box open or close slowly and softly and keep it up..
  • ✅7" 18lb lid stay shocks - A pair of 7 inch shocks in per package, suits for the lid length ＜21".
  • 18lb per shock, if your lid weighs 18 pounds, you could buy a pair of this 18 lb shocks.
  • ✅18 Months Support-- If any questions or dissatisfactions before/after purchasing or need installing/using guide, please message ARANA directly to let us provide in-time assistance to you!.
Check Stock

ARANA Front Hood Lift Support Struts Shocks for 1998-2002 Honda Accord - Front Gas Charged Lift Support (Pack of 2 / Pair / 2pc)

  • Front Hood Lift Struts - High quality replacement for your car, perfect fits 1998-2002 Honda Accord.
  • Front Hood Struts Shocks - Extended Length A [in]: 18.31,Compressed Length B [in]: 13.96,Stroke C [in]: 4.35..
  • Front Hood Lift Supports - Vehicle Location: Front Hood. Interchange number: 4352, SG326010.
  • For Honda Accord Hood Lifts - Easy installation, only a small screwdriver is needed..
  • Brand new item will be provided once any issues during 12+1 months.
Check Stock

Marilyn Hotchkiss' Ballroom Dancing & Charm School

  • ✅ ARANA 20 inch Gas Struts C1608054 Lift Supports -- 2Pcs Set Force 100 Pounds 445N Gas Shocks , most SUITABLE support weight for 2 STRUTS is 85 lbs - 110 lbs, this means if your project lid is between 85 pounds and 110 pounds, this 100LB gas strut set is SUITABLE!.
  • ✅ ARANA 20 Inch 100 Lbs Gas Spring Shocks -- Extended Length A [in]: 19.7(500mm), Compressed Length B [in]: 11.8(300mm), Interchange number: 6939, 6939S10, C1608054, C16-08054.
  • measurement of the supported lid weight or of your old strut pressure is required to prevent purchasing wrongly!.
  • ✅ C16-08054 Gas Props 20inch -- Direct replacement struts for RV bed, motorhome bed, tanning bed, camper bed, travel trailer bed mattress, queen bed, etc..
  • Note: DO NOT compress them by hands before installing, the struts could only be compressed after installing successfully!!!.
  • ✅ ARANA C1608054 100 lb Lift Supports -- Customer will also use them on tonneau cover, heavy camper shell roof, tv cabinet door, trailer window, compartment door, floor hatch, truck cover, bar shed window, heavy custom build lid, etc.
  • Very Strong, do not buy them for the lid weight less than 80 pounds.
  • ✅100% Satisfaction Service -- 18 Months Support comes with every ARANA product.
Check Stock

Wadoy 15.7 Inches Truck Camper Shell Lift Supports Struts Shocks Gas Spring C16-09209 2 Packs

  • CAMPER SHELL STRUTS PARAMETER: Force is 38Lbs/169N per strut.Extended length (center to center)is 15.7". Compressed Length(center to center) is 9.4".....
  • GREAT GAS SPRING REPLACEMENT: Interchange part number C16-09209. Original equipment design ensures easy installation and precise operation, no special....
  • PREMIUM QUALITY: These topper struts are made of high quality materials, and can withstand a wide variety of harsh weather, such as heavy rain and low....
  • APPLICATION: These camper shell shocks can be used on Leer/ARE/Tonneau camper shell rear window topper door, also on RV Truck car's cover window and....
  • HASSEL-FREE SHOPPING: Package includes C16-09209 Gas Springs*2. If you have any questions please contact us any time. We will offer you satisfied....
Check Stock

C16-10788 12 inch 35lb Gas Strut Spring Shocks C1610788 for Truck Toolbox A.R.E. Camper Shell Leer Window 12' 35 Pound Lift Support Struts

  • ✅ C16 10788 12 inch Gas Strut - This 12 inch gas struts 12 inch 35lb Gas Struts are usually used for camper shell topper window pickup toolbox Lid, leer capper, pickup topper, boat engine cover, steel equipment box, boat storage lid, truck canopy, etc..
  • ✅ 12 inch 35 Pound Gas Shocks - Most Suitable Support weight is between 28 to 38 pounds, if out of this range, pls select other ARANA struts with different pressure.
  • Or if you are not sure if this product is suitable, our customer service team will give you professional guide, just click "Ask Seller".
  • ✅ C16-10788 12 inch Gas Spring - Force 35lb Per Shock, Extended Length A [in]: 12.2, Compressed Length B [in]: 8.66, intercharge part no.: C1610788, c16-10788, c16 10788.
  • ✅ Camper Shell Window Lift Struts - 18 Months Replacement Service Plus Lifetime Technical Support, once any quality problems or installation/using problems, Click ASK SELLER besides your order from us and let us solve your problem!.
  • ✅ Truck Tool Box Lid Lift Supports - C1610788 gas shocks could be used as the replacement lift struts for truck Pickup Tool Box, Weatherguard aluminum toolbox, Camper shell topper window and other self-built application.
  • Note: Lift Supports couldn't be COMPRESSED by hands before installing!.
Check Stock

C16-06389 108N/24Lbs 14 Inch Gas Struts Shocks Springs Lift Support for Camper Shell Truck Topper Rear Window Tool Box Lid 2pcs by IAQWE

  • [GAS SPRING PARAMETER]: Force: 24Lbs/108N 14 Inch per Strut, a pair of 2 shocks. Extended Length: 14”, Compressed Length: 8.8”. Very Strong! Can not compress directly by your hands..
  • [14 INCH GAS SHOCKS]: Exchange number: C16-06389, C1606389. Package include Struts* 2, Installation Guide* 1. A variety of colors are available for you to choose..
  • [24LBs GAS STRUTS]: Suitable for Camper Shell Window, Trunk Topper Window, Tool Box, Toy Chest Box Lid and so on. Scope of application: 18-26lbs. Your DIY can create more possibilities for Gas Shocks, looking forward to your DIY creations!.
  • [PREMIUM 14 INCH GAS STRUTS]: Our products are suitable for various harsh weather environments such as outdoor heavy rain and minus 104℉. As the best and reliable gas spring manufacturer, IAQWE will always stand behind you to provide you with the strongest support..
  • [GAS SPRING SUPPORT]: 36 Months Replacement Support. Any issues, just mail us via Amazon, and we will solve for you within 24HRS..
Check Stock

Maxorber 4pcs Front Rear Full Set Shocks Struts Absorbers Kit Compatible with Mustang 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 Shock Absorber 235060 344433 71962 5968 81963

  • OEM SHOCKS SETS FITS: 1994-2004 for Ford for Mustang Compatible with OE# 344433 235060.
  • NOTICE FOR BUYING CAR SHOKCS: Please check your vehicle year make model with our description to avoid buying a wrong type for your vehicle.PACKAGE INCLUDING SHOCK ABSORBERS ONLY,NO SPRINGS OR MOUNTS OR RUBBERS.
  • ELIMINATE YOUR CONCERNS : High quality Japanese made oil seals,to reduce friction between the piston rod and seal, multi-lip oil seal design to isolate external grime to AVOID OIL LEAKAGE AND & ELIMINATE RATTLES,with a Teflon coated piston band for a positive seal and longer life.
  • DIY DESIGN FOR INSTALLATION EASILY: Step1-Raise and Secure the Car and Wheel Removal.
  • Step 2-Remove the nuts and bolts that secure the shock absorber at both ends.
  • Step-3 Disengage the shock from the mounting surfaces.
  • Step-4 Installing the New Shocks and Struts.
  • SAFETY FOR FRONT REAR SHOCKS: To ensure that the shock absorber is not damaged,the shock absorber will be packaged and transported as TWO packages sometimes.
Check Stock

27 inch 45 lbs Gas Struts Spring Shocks Replacement Lift Supports for Undercover Bedcover Tonneau Cover, ST270ED1-45 ST270P45EZ10 2Pcs Set

  • ✅ ARANA 27" GAS SHOCKS are compatible with the following OEM Numbers: 190725,IH1214GS,ML2645,ML26-45,ML-26-45,RSIH1212GS,SL2645,SL26-45,SL-2645,SL-26-45,SL26451,SL26-45-1,SL-26451,SL-26-45-1,SL26455,SL26-45-5,SL-26455,SL-26-45-5,st270ed1-45,ST270EDi45,ST270EDi-45,ST270EDI45,ST270EDI-45,ST270P45EZ10,ST270PU45,ST270PU-45.
  • ✅ ARANA 27 inch 45 Pound GAS STRUTS could be used as the replacement parts of the tonneau cover undercover bedcover for Pickup Truck, easy to install without any special tools required.
  • Note: DO NOT compress them by hands before installing, the struts could only be compressed after installing successfully!!!.
  • ✅ ARANA 27" 45lb GAS LIFT SUPPORTS extended Length from Center Mount to Center Mount is 27 inch, 10mm Nylon End, please measure your old struts at first before purchasing.
  • NOTE: If the lid weight is less than 35lbs or more than 50 pounds, please choose other pressure struts!!!.
  • ✅ Package content: 2× Shocks, 4× Ball studs, 1× Installation Guide are included in each set.
  • If any missing, please message us for new package directly.
  • ✅ Other Applications: ARANA 27" 45LB gas shocks could also be used on other DIY applications.
  • please confirm the lid weight between 35 and 50 pounds, if you are need installation guide, click....
Check Stock

C16-20651 18.7 Inch 40lb/178N Gas Struts Shocks Spring Lift Support for Leer Camper Shell Topper Rear Windows Door Truck Cap Toolbox Canopy Struts Replacement Parts, Set of 2 by HUOPO

  • 【Truck Camper Shell Replacement Part】 Gas shock spring strut for leer camper shell topper rear windows door truck cap toolbox canopy cover. Please compare the interchange number and dimensions with the OEM gas spring before purchasing..
  • 【C16-20651 Gas Struts Specifications】 18.7 inch 40lb/178N Gas Struts Shocks Spring Lift Support. Extended Length 18.70 inch. Compressed Length 10.82 inch. The 18.7 inch gas struts connector is 10mm Nylon Socket type. End fitting 10mm ball stud. WARM TIPS: The 40lb gas struts is so strong that you can't compress it by hand..
  • 【18.7 Inch Shock Interchange Number】 Find the below Interchange number on your OEM gas shock cylinders for a exact match: C16-20651 SE187P40 SE187P40S10, These camper shell shocks are compatible with many truck canopy types, LEER truck cap parts, ARE truck topper parts, Snugtop replacement parts, These are the perfect OEM replacement parts..
  • 【C16-20651 Struts Package Content】Package contains 18.7 inch gas struts*2. Installation with a flat screwdriver, no special tools required..
  • 【13 Months Replacement Warranty】 HUOPO offer a 13-month replacement service. Let us know your concerns about Huopo products. Contact us via Amazon Mail. Our customer service team will respond quickly and wi....
Check Stock

Truhart Street Plus Coilovers Civic 1996-2000

  • APPLICABLE MODELS- The Coilover Struts Spring Shocks fit 1994-2001 Acura Integra /1992-2000 Honda Civic /93-1997 Honda Civic del Sol(Note: if you car model is 1994-2001Acura Integra, For Need spacers for rear coilover only).
  • SPECIFICATIONS- Adjustable height, Non Adjustable camber plate, Non Adjustable Damper.
  • SPRING RATE -2 piece front( 8kg/1), 2 pieces rear (6kg/1).
  • FEATURES OF COILOVER SUSPENSIONS KITS- Direct Replacement Easy Installation, Bushings included for a complete installation, saving time and labor..
  • WHAT YOU GET- Coilover Suspensions Kits, High-quality after-sales service and technical staff . We provide one year warranty and 100% quality assurance. Please check the description to confirm the compatibility car models before purchase.
Check Stock

AutoForever C16-09209 16 inch Gas Shocks C1609209 Camper Shell Window Struts Lift Supports Springs Prop Pack of 2

  • 16 inch Gas Shocks---Extended Length: 15.96" inch.
  • C16-09209 Lift Supports---Compatible with the following Interchange part number: C16-09209 C1609209.
  • 16 inch Gas Struts--- Are usually used on Leer/ARE/Tonneau Camper shell rear window topper door Tonneau Cover RV Truck Car's window.
  • 16 inch Gas Springs Features--- Rust-resistant Black Nitride resistant piston rod extends product life. Easy lifting, reduced closing effort.
  • Installation Tips---we recommend a size measuring on your old struts or a weight measuring on your project lid weight to avoid buying wrong item.
Check Stock

C16-20651 19 inch 40Lbs/178N Gas Shock Strut Spring for Leer are Snugtop Camper Shell Truck Topper Rear Window Pickup Cab Canopy Door Tool Box Lid, 2pcs from IAQWE

  • [GAS SPRING PARAMETER]: Force: 39Lbs 18.7 Inch per Strut, a pair of 2 shocks. Extended Length( hole to hole): 18.7”, Compressed Length( hole to hole): 10.82”. Very Strong! Can not compress directly by your hands..
  • [18.7 INCH GAS SHOCKS]: Exchange number: C16-20651, C1620651. Package include Struts* 2, Installation Guide* 1. A variety of colors are available for you to choose..
  • [39LBs GAS STRUTS]: Suitable for Camper Shell, Truck Topper Window, Leer ARE ATC Camper Topper, Rear Window, Truck Topper Bed and so on. Your DIY can create more possibilities for Gas Shocks, looking forward to your DIY creations!.
  • [PREMIUM 18.7 INCH GAS STRUTS]: Our products are suitable for various harsh weather environments such as outdoor heavy rain and minus 104℉. As the best and reliable gas spring manufacturer, IAQWE will always stand behind you to provide you with the strongest support..
  • [GAS SPRING SUPPORT]: 36 Months Replacement Support. Any issues, just mail us via Amazon, and we will solve for you within 24HRS..
Check Stock

2Pcs C1604154 15' Lift Supports Gas Prop Struts Force 24 Lb/107N Per Shock Spring Dampers for Truck Topper Snugtop Cover Camper Shell Window Tractor Hood Tool Box Cabinet Lid DIY House Door

  • [Function] -- This Set of 2pcs gas prop struts shocks could be used as the replacement struts or DIY modification struts for ARE ATC Snugtop Canopy Leer Camper Shell Window Truck Topper Cap and Home-built Cabinet House Lid.
  • [Specification] -- Pair (2 total) of 24 pound (each) gas struts.
  • Force: 24 lbs/214 N per shock, 48 lb/428 N per set.
  • Extended Length A [in]: 14.45 (between two holes), Compressed Length B [in]: 8.98 (between two holes).
  • [How to Contact us?] -- If you have any issues about the product quality, fitment or missing parts, click "ASK SELLER" besides your order from us, best solution will be offered directly within 24 hours, without returning the package to us!.
  • [Application Range] -- Measurement needed first for the size of your old struts! If your application weighs about 10-15lbs, one shock will hold perfectly.
  • if your application weighs about 18-26lbs, you could install two shocks, adjust the mounting point on the lid 0.79inch towards/opposite to the hinge direction could change the lift pressure to weaker/stronger!.
  • [Installation] -- Exact fit original equipment design ensures easy installation.
  • if you want to install them on DIY builds, you need to buy mounting bracket.
Check Stock