Categories

Best Carbide Bars

Accusize Industrial Tools 4 Pc 1/2'' Round Shank Indexable Boring Bar Set with Tcmt21.50 Carbide Inserts, 90 Degree, 2627-9104

  • Round shanks allow the operator to set positive or negative rake. indexing the insert.
  • Chip breaker eliminates long stringer chips. It is not necessary to remove tool from chuck or tool post.
  • A new cutting edge may be presented by simply. Screw Down Style..
  • Positive Rake 90Degree Lead. Uses 0.050" key. C6 grade: carbide for steel and alloy steel..
  • 1/4" I.C. carbide inserts fit all bars. Radius = 0.015”. Key = T8. Shank: 1/2". Piece per set: 4..
Check Stock

Infinity Cutting Tools Mega Flush Trim Router Bit Set| Carbide Tip | Heavy-Duty | for Handheld Or Table Mounted Wood Router

  • Award-Winning Router bits and router bit sets, offered in 1/4", 1/2" and 8mm shanks.
  • C.N.C. machined bodies from solid high strength steel bars, we do not use castings!.
  • Multi-Axis automated carbide grinding for ultimate sharpness and life.
  • Induction brazing ensures the strongest bond between carbide tips and steel bodies.
  • Silver non-stick coating delivers years of trouble-free service and easy maintenance.
Check Stock

3PCS S08K/S10K/S12M- SDUCR07 95 Degree Internal Turning Boring Bar with 10pcs DCMT21.51 DCMT070204 Carbide Turning Inserts for Machining Steel Parts and Stainless Steel Three Holder Set With Inserts

  • ☞Material : DCMT2(1.5)1 carbide Inserts with CVD coating ,55 degree diamond turning inserts ，used for machining stainless steel and steel parts.
  • ☞About the Internal Boring bars: 40Cr common steel with forging process , strong and durable ,95 degree right hand internal turning holder. Screw compression,easy to install and remove.
  • ☞Advantage: Offer long life and faster cutting speed, low friction coefficient, good wear resistance Designed for Steel, cast iron and non-ferrous materials.
  • ☞Application: The Minimum processing aperture is 3-5mm of the boring bar head diameter. Used for turning and finishing on a wide range of materials..
  • ☞Package includes: 3pcs Turning Boring Bars (S08K-SDUCR07 + S10K-SDUCR07 +S12M-SDUCR07 ) + 10pcs DCMT070204 Gold Carbide inserts + 3PCS T8 Wrenches.
Check Stock

DEEFIINE Carbide Tip Wood Lathe Turning Tool Kit, Lathe Roughing and Finishing Hollow Tool Interchangeable Aluminum Alloy Handle with Diamond Round Square Carbide Blade (Metal handle)

  • Sharp and easy: Our carbide turning tools set can be used to quickly process any workpiece on your lathe. The wood lathe tool set can provide a smooth and clean cutting effect by four types of cutters designed for different grinding effects. This saves a lot of time when grinding and honing, because you can easily replace the blade when it becomes dull..
  • wood turning Tool kit: The high-quality CNC machining made of square stainless steel makes it stronger, harder and rolls less than round shaft tools. It has a square shaft so that the knife can be used with a flat back. Keep the shelf flat and flush with the floor。.
  • Rotary cutter design: the indexable carbide tool blade can be rotated or replaced to provide new cutting edge when needed..
  • Ergonomic design: the turning tool is equipped with 1pcs frosted handle that fits comfortably in the hand. In addition, it is equipped with an extension handle that can be used in deeper scenes, aluminium oxide alloy handles for grip, comfort and durability. making it a safe choice..
  • woodturningTools and Accessories - 1pcs handle and 1pcs extensi....
Check Stock

Pro Grind Sharpening System For Lathe Turning Tools, Chisels, Skews, Gouges, Bowl Gouges, Spindle Gouges and More. Includes the Multi-Grind Jig for Gouges, Slotted Platform and Tool Rest

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. We all know how "enjoyable" sharpening our turning tools can be. We also know that if you don't have the tool at just the right angle when turning, the results can be undesirable. With the Savannah Carbide Mini Turning Tool Set you can eliminate the inconvenience of sharpening your turning tools and with the flat bottom bars on each tool you’ll be able to easily turn most any type of project!.
  • When the carbide cutter on the tool finally dulls, simply loosen the cutter screw, rotate the tip and secure the screw for a fresh, clean cutting edge. Carbide cutters will stay sharper longer when compared to standard turning tools. However, once needed, the cutters are replaceable. This set includes 2 of each cutter style and extra screws..
  • Unlike standard wood turning tools, when using carbide tipped cutters, you keep the cutter straight in on the object you are turning. This produces a shearing action as opposed to the traditional cutting method of standard turning tools. The shearing action of this type of turning produces much cleaner cuts and is easier than using standard turning tools..
  • Each mini turning tool has a Flush Fit Comfort Grip handle. Each handle is approx. 9-1/8" long a....
Check Stock

Roof Rack Cargo Basket, Universal Car Top Carrier Rack Adjustable Length 43/64 inches Anti-Rust Car Top Luggage Holder Carrier Basket 150lb with Removable Extension Kit Wind Fairing

  • ☺ REMOVABLE EXTENSION KIT: Easy three-piece assembly with two size options for any sized vehicles from coupe to pickup truck equipped with roof cross bars. Overall extension - 64"(L) x 39"(W) x 6'(H).
  • Overall non-extension - 43"(L) x 39"(W) x 6'(H)..
  • ☺ 150LB CAPACTIY: roof rack basket is constructed from tubular steel. It is finished with an E-coat and carbide black powder coat for long-lasting corrosion resistance., provide extra storage capacity UP to 150 lbs.Steel wind fairing decreases wind resistance and noise..
  • ☺ EASY TO ASSEMBLE AND INSTALL: Mounts to vehicle's cross bars with 4 universal U-bolts. Easily mounting with four universal U-bolts, accommodating square cross bars less than 4.6" wide x 1.35" thick or round bars less than 1.35" in diameter..
  • ☺ SECURITY : Bottom metal bars and side rails help keeping your belongings in place while providing plenty of tie down points.Meanwhile..
  • ★★★ NOTE: Ⅰ. Extension roof basket need the 2 cross bar's distance above 29.7 inches. Ⅱ. Must be removed before auto car wash! Ⅲ. Your vehicle must have roof rails and cross bars installed to mount this basket..
Check Stock

Infinity Cutting Tools 1/2' Shank, Lock Miter Jr. Router Bit, 3/8' to 3/4' Stock | Carbide Tip | Heavy-Duty | for Handheld Or Table Mounted Wood Router

  • Award-Winning Router bits and router bit sets, offered in 1/4", 1/2" and 8mm shanks.
  • C.N.C. machined bodies from solid high strength steel bars, we do not use castings!.
  • Multi-Axis automated carbide grinding for ultimate sharpness and life.
  • Induction brazing ensures the strongest bond between carbide tips and steel bodies.
  • Silver non-stick coating delivers years of trouble-free service and easy maintenance.
Check Stock

OSCARBIDE TCMT110204(TCMT21.51) Carbide Turning Inserts TCMT Insert Tain Coated CNC Lathe Inserts for Lathe Turning Tool Holder Replacement Insert, 5 Pieces

  • Size: TCMT 21.51(TCMT110204), 3/32" Thick, 1/64" Radius, 7 degrees relief angle.
  • Material: made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Designed for Steel, cast iron and non-ferrous materials.
  • Used for turning and finishing on a wide range of materials.
  • Fit our 1/2”Boring Bars Set or 3/8" Mini Turning Tool Holder or Other Brands the same size carbide inserts, you can search the Asin: B07PLX982C or B07PYSN4JC to purchase set directly..
Check Stock

Lackmond Beast Pro Aluminum/Non-Ferrous Metal Saw Blade - 10 Metal Cutting Tool with Titanium Carbide Tipped Blade & 5/8 Arbor - NFM1080C

  • TRIPLE CHIP GRIND – Grind where a slightly wider flat top raker tooth follows a higher trapezoidal tooth’s cut to eliminate chipping and achieve....
  • VERI-BLEND HIGH DENSITY CARBIDE – Lackmond’s titanium carbide tipped blades provide the best performance for your specific cutting application,....
  • ANTI-FRICTION SLICK COAT – Drastically reduces debris and heat build-up, resulting in minimal blade drag and extended blade life.
  • EXPERT DESIGN– The non-ferrous metal blades are ideal for cutting brass, aluminum extrusions, solid bars, angles, and channel shapes.
  • EQUIPMENT – Designed to be used on chop-miter saws and table saws.
Check Stock

CURT 17208 Replacement Weight Distribution Hitch Hookup Brackets , Black

  • Allows for secure mounting of the spring bars on the trailer frame.
  • Perfect for use on trailers with LP tanks or other obstructions.
  • Snap-up design allows for easy leveraging of spring bar.
  • Bracket protected by a highly durable carbide powder coat finish.
  • Includes two hookup brackets, bolts and pins.
Check Stock

POWERTEC 15519 Aluminum Oxide Grinding Wheel 100 Grit, 6\ x ¾\ with 1/2\ Arbor

  • INCLUDES: (1) Diamond Grinding Wheel Dresser Tool.
  • FUNCTION: Seamlessly clears unwanted debris and impurities while moving the diamond surface across the wheel to reveal sharp and clean surfaces - making abrasive deburring and grinding wheel dressing quick and easy.
  • APPLICATIONS: Perfect for resin bonded, chlorinated, mechanized, and silicone carbide grinding wheels.
  • BUILD: Constructed with premium quality metal, this handheld wheel dresser comes with ridged handles for easy grip, along with guide bars and mounting.
  • SPECS: Overall tool length is 4-5/8” long with a 1/2” x 1-3/4” diamond surface, and a silver 36 grit diamond chip.
  • Returns your wheels to peak-performance readiness.
  • Clears unwanted debris and impurities from your grinding wheels revealing sharp clean cutting surfaces.
Check Stock

CURT 17005 Weight Distribution Hitch Bolt-On Hookup Brackets

  • Allows for repositioning of spring bars around an LP tank or other obstruction.
  • Replaces factory spring bar brackets or hangers.
  • Bolt-on design uses two bolts per bracket to fasten directly to the frame (some drilling required).
  • Brackets protected by a highly durable carbide powder coat finish.
  • Includes two chain hangers, bolts and pins (chains not included).
Check Stock

VeYocilk Lathe Threading Carbide Inserts:10 Pcs 11IR A60 1/4 Carbide Inserts for Internal Threading Holders CNC Cutting CNC Turning Tool

  • High Efficiency: This turning tool holders kit for semi-finishing and finishing operations, can reduce the tool grinding cost and improve the cutting efficiency..
  • High Performance: Made of carbide and the coating material is TIN, it can be used for processing steel, the inserts has high hardness, low friction coefficient, good wear resistance and strong impact resistance..
  • Threading Boring Bars: The material of the boring bar is 40Cr steel, widely use, tightly impacted bolt, simple structure, often used for small hole machining..
  • Package Includes: 1PC SNR0008K11 + 1PC SNR0010K11 + 1PC SNR0012M11 turning tools + 3PCS 11IR A60 turning inserts + 3PCS T8 wrench..
  • Best Service: The carbide inserts and turning tools holder are packed in plastic containers, which is safe and easy to store. Any more question about this item, please feel free to email us..
Check Stock