Categories

Best Carbide Burr

Double Cut Carbide Rotary Burr Set - 10 Pcs 1/8 Shank 1/4 Head Length Tungsten Steel for Woodworking,Drilling Metal Carving Engraving Polishing

  • ✔【CARBIDE DIE GRINDER BITS】: These carbide rotary burr set, with 1/8'' shank is made from Tungsten Carbide. Total Length:45-50mm, Cutting Diameter 1/4'', Shank Length 35mm, Shank Diameter 1/8''..
  • ✔【DOUBLE CUT DESIGN】: The groove lines of these carbide rotary burr's head are crossed, which makes it more suitable for materials with relatively low density, such as wooden, plastic and aluminum..
  • ✔【ADAPTABILITY】: 1/8” shank fits dremel and most small rotary tools with three jaw chuck for accurate centering. An ideal choice for your DIY woodworking, carving, engraving, and polishing..
  • ✔【LONG WORKING LIFE】: Packed with plastic storage case for safety storage and protection. The working life of these solid rotary burr is 10 times longer than high-speed steel and 200 times longer than grinding wheel..
Check Stock

Carbide Burr, 1x Double Cut SH-41-0.118\ (3mm) Shank Rotary Tool Cutting Burr - Accessories For Dremel, Fordom, Flex Shaft, Dewalt And Die Grinders - For Wood Carving, Metal Working And Engraving.

  • ✔️ [PREMIUM BURRS DESIGNED IN THE UK] Whether your job implies precision metal work, engineering, tool making, welding, deburring, jewelry making, or you enjoy various DIY arts and crafts or hobbies such as sculpting, TaitaTools carbide burr is exactly what you need for premium results!.
  • ✔️ [TOP QUALITY MATERIAL] This rotary tool bit is made with premium carbide tungsten steel, a highly durable material which is guaranteed to withstand the test of time. With a double cut tooth angle which prevents chipping, this tungsten carbide bit is superior to any high speed tungsten carbide burr..
  • ✔️ [A TOOLBOX MUST] This carbide burr for wood includes everything you need for cutting, shaping, grinding, polishing and removing sharp edges, being compatible with ferrous and non-ferrous metals, wood, plastic and even stone..
Check Stock

Carbide Burr, 1x Double Cut SE-41-0.118\ (3mm) Shank Rotary Tool Cutting Burr - Accessories For Dremel, Fordom, Flex Shaft, Dewalt And Die Grinders - For Wood Carving, Metal Working And Engraving.

  • ✔️ [PREMIUM BURRS DESIGNED IN THE UK] Whether your job implies precision metal work, engineering, tool making, welding, deburring, jewelry making, or you enjoy various DIY arts and crafts or hobbies such as sculpting, TaitaTools carbide burr is exactly what you need for premium results!.
  • ✔️ [TOP QUALITY MATERIAL] This rotary tool bit is made with premium carbide tungsten steel, a highly durable material which is guaranteed to withstand the test of time. With a double cut tooth angle which prevents chipping, this tungsten carbide bit is superior to any high speed tungsten carbide burr..
  • ✔️ [A TOOLBOX MUST] This carbide burr for wood includes everything you need for cutting, shaping, grinding, polishing and removing sharp edges, being compatible with ferrous and non-ferrous metals, wood, plastic and even stone..
Check Stock

Walter 01V652 Tungsten Carbide Finishing Bur - 5/8 in X 3/16 in Double Cut Cone Bur with 1/4 in Shank Vibration Free Cutting Tools

  • Durable: made from high-grade tungsten carbide, the carbide bur is suitable for the toughest applications in a wide range of materials. The finishing bur is equipped with a shank for comfortable grip and easy handling.
  • Metal Removal: with perfect concentricity and balance, the cutting tool ensures safe and fast material removal. The double-cut carbide burr runs without vibration, thus providing maximum operator comfort.
  • Finishing Bur: the exclusive tooth design of the metallic burr makes it ideal for working in confined areas. Silver brazed shock absorber significantly reduces the impact on the grinder, preventing it from damage.
  • Double Cut: the surface finishing burr is ideal for use on steel, brass, bronze, cast iron, carbon fiber, plastics, hard rubber, weldments steel, titanium, and other metals. With greater back support, the carbide-cut bur performs well even in most detailed jobs.
  • Specifications: made in compliance with SL-5 USCTI, the tungsten carbide bur ensures safety at high speeds. This cone bur has a 5/8 in. diameter and 3/16 in. length with a 1/4 in. shank diameter.
Check Stock

10 Pcs Tungsten Carbide Burr Set – 1/4” Shank Double Cut Carbide Rotary Burr Set – Die Grinder Bits with Storage Box - Carving Rotary Bits for Deburring, Chamfering, Engraving, & Carving

  • Premium Quality Rotary Carbide Burrs: Want a perfect finish with least pull? Made of heat-treated Tungsten Carbide (YG10), next to diamond in hardness, these burring bits require less force to work through the hottest and strongest materials.
  • Multi-Sized and Multi-Shaped Die Grinder Bits Set: Stand out from the rest. Customize your product with 10 different sized 1/4” (6 mm) shank burr bits comprising of sizes SA-1, SA-3, SC-1, SC-3, SD-2, SE-3, SF-3, SL-1, SL-2, & SH-1.
  • Extensive Application: Regardless of the scale, this cutting burr bits set comes in handy while working with metals like aluminium and steel, wood, and plastics from large-scale industrial assembling to home repairs.
  • Double Cut Burr: Are you a perfectionist? If not, it will still give an ultra-sleek appearance to ferrous or non-ferrous metal, wood, or plastic with one-touch running convenience, owing to its double cut carbide burr.
  • Storage Box for Carbide Bits: We care for your convenience, so these metal burrs come in a properly arranged plastic box that works as an organizer. Hence, a must-have for the appr....
Check Stock

TianTac Tungsten Carbide Rotary Burr Set 10pcs Carving Burr Bits with 3mm Shank 6mm Bit for Wood & Stone Carving Steel Metal Working

  • Material: This carbide burr set/rotary bit set is made of premium tungsten Carbide steel which has long working life, Shank diameter: 3 mm(1/8 inch), Cutting edge diameter: 6 mm(1/4 inch), Please check the size before you buy it..
  • Multi-Purpose: This rotary burr set includes everything you need for carving, engraving, polishing and removing sharp edges, being suitable for wood, stone carving, metal working and die grinders. The kit includes a massive selection of shapes for all types of cuts..
  • Great Processing Quality: with this burr set, the surface of your target is smooth after carving or engraving, therefore it can even process a variety of high-precision mold..
  • Those carbide burr rotary bit is generally use with handheld electric or pneumatic tool drive (can also be used in machine tool). The speed of the electric or pneumatic tools usually is 6000-50000 revolutions per minute..
  • Full Customer Satisfaction, If you’re not 100% satisfied with your purchase, please get back to us, we will offer refund or replacement to make sure your full satisfaction..
Check Stock

SpeTool Carbide Rotary Burr For Aluminum Cutting Non-Ferrous 1/4 inch shank 4Pcs/Pack

  • 4-piece nonferrous carbide rotary burr set for peneumatic acccessories and die grinder burr.
  • High grade tungsten carbide burr, 1/4 Inch shank aluminum single Cut.
  • Aluminum die grinder bits are also for use on non-ferrous and non-metallic materials: Plastic, Zinc. It is designed for rapid stock removal with minimum chip loading.
  • High quality manufacturing method delivers vibratin free operation.
  • 1/4 inch shank for rotory, 4 pcs per pack, SA-3NF, SC-3NF, SD-3NF, SF-3NF.
Check Stock

Carbide Rotary Burr Set - BIGOU 10PCS Double Cut Carving Burr Bits Tungsten Carbide 1/8 Shank 1/4 Grinding Head for DIY Carving Metal Polishing Engraving Drilling

  • Material: This rotary burr set is made of premium tungsten Carbide steel, that lasts long working life. It has extremely high hardness and good toughness, machining hardness reach to HRC70. Shank diameter is 3 mm(1/8"), Cutting edge diameter is 6 mm(1/4"), Please check the size before buying..
  • Efficient Work: Our carving burr bits have faster cutting time and better polishing effect due to their double cut head design. Significantly improve work efficiency. 10 times higher than the durability of high speed steel cutter..
  • Widely Use: This carbide burr set includes everything need for drilling, engraving, grinding, polishing, finishing and removing sharp edges, suitable for wood, metal, jade, marble, bone etc..
  • Durable Packaging Box: 10pcs metal grinder bits are packaged in a small plastic case for safety storage and protection, no need to organize always keep neat. This is a essential kit for metal workers and enthusiasts..
  • Satisfaction Service: Carbide rotary burr set are very suitable for gifts to friends, relatives and lovers. If you have any questions with this products, please feel free to contact us and we will give you a satisfactory answer..
Check Stock

9 Pieces Tungsten Carbide Single Cut Rotary Burr SET 1/4 Shank Fit 6mm Shank

  • Shank diameter:6mm, Shank Length: 35mm/Total length: 45-50 mm.
  • 9 pieces Tungsten Carbide Single Cut Rotary Burr SET 1/4" shank Fit Dremel.
Check Stock

Carbide Burr Set, 20 PCS Double Cut Carbide Rotary Burr Set 1/8" Shank Dremel Bits, Dremel Carving Bits for Woodworking, Drilling, Metal Carving, Engraving, Polishing, Porting

  • 【ROTARY BURR SIZE SPECIFICATION】These carbide rotary burr set, with 1/8'' shank is made from Tungsten Carbide. Total Length:45-50mm, Cutting Diameter 1/4'', Shank Length 35mm, Shank Diameter 1/8''..
  • 【DOUBLE CUT DESIGN】The groove lines of these carbide rotary burr's head are crossed, which makes it more suitable for materials produces a finer finish than single cut and reduces the size of the chips and slivers. It also gives greater tool control.with relatively low density, such as wooden, plastic and aluminum..
  • 【WIDE RANGE OF APPLICATIONS】 1/8” shank fits dremel and most small rotary tools with three jaw chuck for accurate centering. An ideal choice for your DIY woodworking, carving, engraving, and polishing..
  • 【HIGH QUALITY PROCESSING】Packed with plastic storage case for safety storage and protection. The working life of these solid rotary burr is 10 times longer than high-speed steel and 200 times longer than grinding wheel.The speed of the electric or pneumatic tools usually is 6000-50000 revolutions per minute..
Check Stock

COLIBROX 1 Set 5PCS 1/4'' DIY Drill Bit Set Carpentry Cutting Tools For Woodworking Knife Wood Carving building/engineering Hand tool useful

  • Colibrox’s rotary tool bits are the highest quality product in the market, this carbide burr set is guaranteed to get the job done. All your design and DIY dreams can come true..
  • These woodcarving bits have the perfect size and are versatile, our woodcarving bits can be used for more than just carving.Shave, smooth and shape wood the exact way you want with COLIBROX..
  • Check out our metal grinder bit for wood carving for a well rounded product, our grinding tool set make sure to help your job be precise. The quality rotary burr set will ensure ease of work and the perfect outcome..
  • Our wood carving bits are made of the best metal, making them durable and handy. These grinder bit for drill can be used on many different surfaces..
  • These burr bit set metal are the dream tool to work with, get your job done best with carbide burr set!.
Check Stock

Mars-Rock Carbide Burr Set Compatible with Dremel 1/8" Shank 20PCS Die Grinder Rotary Tool Rasp Wood Carving Bits Accessories Attachments Metal Grinding Engraving Cutting Trimming Porting Double Cut

  • The 20 Pcs carbide burr kit is a great variety of accessories for the dremel tool and any rotary tool. It's a must-have for any wood carver or metal engraver..
  • Great addition to rotary tools,micro pencil die grinder,compatible with Dremel,Apexforge,Beyond,Bosch,Dewalt,Fixtec,Foredom,Goplus,Goxawee,Hammerhead,Ingersoll-Rand,Makita,Maxman,Milwaukee,Pferd,Populo,Proxxon,Ryobi,Teccpo,Vastar,Wen,Workpro,Worx and so on..
  • Great and helpful to get into the corners to smooth out. Can be used for a multitude of craft projects..
  • Sharp,durable and well balanced. The carbide burr set cuts through hard materials like a hot knife through butter. No wear out after a long time use. The shaft will not bend at high speed..
  • Comes in a paper box and suitable plastic case which keeps the 20 PC carbide burr set tidy..
Check Stock

5Pcs Premium Tungsten Steel Carbide Rotary Burr Set 1/4inch Shank Double Cut Carbide Burr Set 8MM Head Die Grinder Bits for Die Grinder Drill DIY Wood-Working Carving Metal Polishing Engraving

  • 【5Pcs Solid Carbide Burr Bits】The grinder drill set is made of tungsten carbide, high sharpness and good toughness, machining hardness up to HRC70, great for carving, polishing, drilling.
  • 【Metal Die Grinder Drill Bit】The rotary file is widely used for processing metal(include hardened steel) and non-metal( like wood, bone and marble), perfectly fits for die grinder and drill.
  • 【1/4” Shank Rotary Burr】Size: Shank-1/4inch(6mm), Tip Head-5/16inch(8mm), Total Length 58-65mm, Cutting Burr Shape: Ball, Round Nose, Pointed Tree, Cylinder with End Cut and Cylinder with Round Head.
  • 【Double Cut Head Design】The double burr can cut cleanly and quickly through hardened steel, with smoother surface and no dust pollution compared with grinding wheels or steel cutter.
  • 【Wide Applications】The tungsten grinding bits are widely used in woodworking carving, mold processing, burr cleaning and impeller polishing.
  • Plus package comes with plastic case for safety storage and protection.
Check Stock