Categories

Best Carbide Engraving Burrs

SL-3 Tungsten Carbide Burr Rotary File Taper Shape with Radius End Double Cut with 1/4\Shank for Die Grinder Drill Bit

  • ...materials such as iron, alloy steel, stainless steel etc..
  • 【Professsion 20 PCS Set】The carving bits include A, C, D, E, F, G, H, L, M and N type burrs. There are 2 sizes for each type burrs, which is 1/8 shank 1/8 head diameter and 1/8 shank 1/4 head diameter. They are suitable for almost everything you need for engraving, cutting, shaping, grinding, polishing and removing sharp edges..
  • 【Easy to Use】 If the cutting bits are chipping easily this could be due to the speed being too slow. However, it's ideal to start the cutting slow, increasing the speed as you go along. High speeds will prevent clogging in the flutes of your burrs. The 1/8 carving burrs can bear the speed range of 6000-50000 revolutions per minute..
  • 【Widly Use】The 3mm and 6mm head diameter carbide cutting burrs set is widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, cylinder head porting and sculpting..
Check Stock

aTourer Tungsten Carbide Burr Set Rotary File Rasp 1/8 & 1/4 Cutting Head Die Grinder Milling Bit 20pcs Single Burr Double Cut 20pcs

  • ...materials such as iron, alloy steel, stainless steel etc..
  • 【Professsion 20 PCS Set】The carving bits include A, C, D, E, F, G, H, L, M and N type burrs. There are 2 sizes for each type burrs, which is 1/8 shank 1/8 head diameter and 1/8 shank 1/4 head diameter. They are suitable for almost everything you need for engraving, cutting, shaping, grinding, polishing and removing sharp edges..
  • 【Easy to Use】 If the cutting bits are chipping easily this could be due to the speed being too slow. However, it's ideal to start the cutting slow, increasing the speed as you go along. High speeds will prevent clogging in the flutes of your burrs. The 1/8 carving burrs can bear the speed range of 6000-50000 revolutions per minute..
  • 【Widly Use】The 3mm and 6mm head diameter carbide cutting burrs set is widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, cylinder head porting and sculpting..
Check Stock

Carbide Burr Set Die Grinder Bits Rotary Tool Bits 1/8" Shank 20 PC Double Cut Compatible with Dremel Wood Carving Accessories Cutting Burrs Metal Grinding Engraving Polishing Porting Trimming

  • ...High efficiency, high-quality finish, long service life, good economic returns.The working life of these solid rotary burr is 10 times longer than high-speed steel and 200 times longer than grinding wheel..
  • √【A good Carbide Burr Set】A good choice of DIY wood carving, engraving, and polishing. Suitable for multiple types of rotating tools.Making DIY carving fans much easier to do the wood working job.Excellent for fine detail work, cutting, engraving, carving, touch-up and finishing.It is also an ideal gift for woodcarvers..
Check Stock

YUELUTOL Aluminum Cutting Bits Carbide Burr Set-10 Pieces With 3mm(1/8 inch) Shank Dia and 6 mm (1/4 Inch) Head Size For Die Grinder Bits Aluminum And Wood

  • 【Single Cut Carbide Burrs】:Aluminum cut burrs are for use on non-ferrous and non-metallic materials. It is designed for rapid stock removal with minimum chip loading. Good for your wood carving, metalwork ,drilling and engraving..
  • 【Excellent Tungsten Carbide】:Made of heat-treated 100% raw material, long life and high durability. 10pcs Carbide Rotary Burr Set about 6mm Cut Dia, 3mm(1/8 inch) Shank, total length: approx. 45-50 mm fits dremel and most small rotary tools. Different shapes to meet your various needs..
  • 【High Working Efficiency】:This single-cut carbide bur is designed for use in general purpose applications on steel, cast iron, ferrous, and nonferrous metals. Speed is generally 6000-50000 rev / min, high flute finish for easy chip flow and fast stock removal..
  • 【Widely Application】:Easy to use, safe, reliable, economical and long service life. Widely used in machinery, automobile, ships, chemical, craft and more. Most popular for body shops, fabrication shops,brake shops, industrial shops, die manufacturers, home repairs ect..
Check Stock

10pcs CNC Router V Bits 3 Edge Pyramid Engraving 1/8 Shank CNC 3D Milling Cutter| 20/30/45/60/90 Degrees 0.1mm Tip

  • 3 Edge Pyramid cnc engraving bits - Contains 10 end milling cutters, five different cutting degrees (20°/ 30° / 45° / 60° / 90°).
  • Overall Length: 25mm / 28mm / 28mm / 29mm / 30mm.
  • Suitable Material - PCB, MDF, ABS, PVC, Acrylic, Nylon, Resin, Plastics, Density board, Wood, Plywood, Hardwood etc..
  • Carbide Materials - Carbide has excellent properties such as high hardness, wear resistance, good strength and toughness, heat resistance and....
  • 【Advantages Application】High precision grinding and concentricity, reducing the chance of burrs and deviations. For carving, cutting, engraving,....
Check Stock

uxcell 1/8" Shank 0.8mm x 3mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

uxcell 5PCS 1/8" Shank 1.5mm x 12mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

15 Pieces Wood Carving and Engraving Drill Bit Double Cut Carbide Rotary Burr Woodworking Drill Bits Set for DIY Woodworking Drilling Engraving Polishing Supplies

  • You will receive: the package contains 5 pieces wood carving and engraving drill bits and 10 pieces double cut carbide rotary burr, 15 pieces in....
  • Size details: wood carving tools have 5 sizes carving, 3 x 3 mm, 3 x 4 mm, 3 x 5 mm, 3 x 6 mm, 3 x 7 mm, 3 x 8 mm in shank and bit diameter.
  • Durable to use: the wood carving and engraving drill bits are made of high-speed steel, and the double cut carbide rotary burrs are made of tungsten....
  • Easy to use: the 1/8 inch handle fits most rotating tools, just install it like any other typical drill bit easily, will be your ideal choice for DIY....
  • Functional tools: our practical tool accessories provide you delicate fine processing, widely applied in metal, woodworking, model engineering,....
Check Stock

Tungsten Carbide Rotary Burr Set 20 Pcs 1/8 Shank Die Grinder Bits Double Cut Rotary Burrs Set for DIY Woodworking Drilling Metal Carving Engraving Polishing

  • These carbide burr sets are made of Tungsten Carbide steel which has long working life with high precision shape..
  • This rotary burr set includes everything you need for carving, engraving, polishing and removing sharp edges, being suitable for wood, stone carving, metal working and die grinders. The kit includes a massive selection of shapes for all types of cuts..
  • The groove lines of these carbide rotary burr's head are crossed, which makes it more suitable for materials with relatively low density, such as wooden, plastic and aluminum..
  • These cutting burrs can work on wood metal plastic ceramic stone glass etc. 20 PCS burr set are ideal choices for your various DIY arts and crafts..
  • 20 kinds of rotary burr set type can meet different work such as carving sculpturing polishing deburring grinding cutting chamfering milling cleaning porting.
Check Stock

Carbide Burr Set Tungsten Carbide Burr Rotary - ORAPXI 20pcs 1/8\ Shank Double & Single Cut with 3mm Cutting Head Diameter Fits Most Rotary Drill Die Grinder for Engraving, Carving and Drilling

  • 【Double & Single cut】10 for each of the double cut and single cut. Double-cut is suitable for plastic, wood, aluminum, etc. Single cut for hard material, such as iron, steel and so on. The 20pcs rotary burr bits set includes various types of burrs with assorted shapes to meet your different drilling needs..
  • 【Fit for most rotary tools】With 1/8"(3mm) Shank, Solid tungsten rotary tool bits - Accessories for Dremel, Fordom, Dewalt, Milwaukee and Die Grinders..
  • 【Professional tools】This is an essential carbide rotary burr toolkit for woodworking and engraving enthusiasts. These tools are used clean welds or metal processing, which can effectively reduce labor intensity and improve work efficiency..
  • 【Premium Material】Made of high quality tungsten steel, processing hardness up to HRA≥85. This grinding head is easy to use..
  • 【Widely usage】ORAPXI carbide burrs can be used on all kinds of metal and metalloid, including quenched steel, marble, jade and bone, metalwork, tool making, model engineering, wood carving, jewelry making, welding, chamfering, casting, deburring, grinding and sculpting..
Check Stock

Benchmark Abrasives Cylindrical Shape Premium Double Cut Tungsten Carbide Burr for Metal Wood Welding High-Speed Die Grinders enclosed in Plastic Capsule 1/4 Shank SA-5

  • Benchmark Abrasives SA-5 cylinder shape burrs are great for interior contour work and deburring. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel)..
  • These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance..
  • Double-cut or Crosscut carbide burrs tend to be used on ferrous and non-ferrous metals, soft steel, and also for all non-metal materials such as stone, plastics, hardwood, and ceramic..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

8Pcs Carbide Burr Set 1/4''(6.35mm) Shank for Metal Tungsten Carbide Double Cut Rotary Cutting Burr Set Die Grinder Bit Grinding Polishing Carving Tool

  • ✔Quantity: 8-piece carbide grinder rotary file burr tool set SA-5，SA-3，SC-3，SC-1，SD-3，SD-1，SF-5，SF-3, with box size: 140x110x25mm.
  • ✔Double-cut style has rows of cutting teeth cut in two intersecting directions, Unique tooth angle prevents chipping for the longest lasting design possible..
  • ✔Grinder drill is must-have kit for woodworkers and enthusiasts, they need to clean the welds frequently or use metal for cleaning,easy to grasp and use, safe and reliable.
  • ✔Carbide burrs sets fit most small rotary tools,die grinders,for woodworking drilling carving engraving milling porting, metalwork, tool making, model eng, cylinder head porting and deburring etc..
  • ✔Made of heat-treated tungsten carbide material, Used for metal working in mold and pattern making, die sinking, surface cleaning and maintenance,perfect for opening holes, or porting heads on ferrous materials..
Check Stock

Dremel 729-01 Carving & Engraving Rotary Tool Accessories Kit, 11-Piece Assorted Set - Perfect for Use On Wood, Metal, and Glass

  • Turn your Dremel rotary tool into a versatile carving machine with the 11-piece carving & engraving micro accessory kit..
  • Kit includes a reusable storage case and a variety of accessories to allow you to carve, etch and engrave in a variety of materials including steel, wood, plastic, glass, stone, ceramic, and more..
  • Carving/Engraving Accessories: 105 1/32" Engraving Bit (x1), 106 1/16" Engraving Bit (x1), 107 3/32" Engraving Bit (x1), 108 - 1/32" Engraving Bit (x1), 7103 5/64" Diamond Wheel Point (x1), 7134 5/64" Diamond Wheel Point (x1).
  • Sharpening/Grinding Accessories: 83142 9/32" Silicon Carbide Grinding Stone (x1), 83322 - 1/8" Silicon Carbide Grinding Stone (x1), 83702 1/8" Silicon Carbide Grinding Stone (x1), 84922 3/16" Silicon Carbide Grinding Stone (x1), 85602 13/32" Silicon Carbide Grinding Stone (x1).
  • USA-BASED CUSTOMER SERVICE: Available by chat, email, phone or visit us at our service center in Racine, WI..
Check Stock