HHIP 2065-2500 2-1/2 Inch x 3/4 Bore 45 Degree SE Indexable Face Mill

  • The close pitch, super positive, 45 degrees major cutting edge angle, milling cutter reduces cutting forces and permits high cutting speeds with limited power machines. Screw M5x12.
  • SEHT-432 (SEHT120408) Tin coated Carbide Insert(Item #6017-0432).
Check Stock

OSCARBIDE Carbide Inserts TPG322 Turning Inserts TPGN160308,Tin Coated for Lathes and Mills,10 Pieces/Box.

  • Indexable Carbide Milling Insert 1/8" Thick, 1/32" Radius,11 degree relief angle..
  • Carbide Cutters material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance.
  • Carbide Bits for turning and milling carbon and alloy steels, tools steel and stainless steel.
  • Screw on triangle style insert with a chip breake.
  • 10 pieces per box, provides longer tool life than uncoated grades.
Check Stock

Accusize Industrial Tools 5/8\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0058

  • Smooth finish on each turning tool holder marked with tool holder style and shank size..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Insert screw and wrench included, 9pcs indexable turning tool holder, 9pcs TiN Coated C6 carbide insert.
  • 9pcs hex screw, Hexagon key and Aluminum fitting case..
  • *** Insert kit Item#: 2988-0058INSERTS (Sold Separately on Amazon)***.
Check Stock

Easy Wood Tools Full-Size Easy Finisher (4200) Woodturning Tool with Round Cutter Scraper Chisel with Replaceable Carbide Insert

  • Ergonomic Hardwood Maple Handle: 18" Maple / Tool Bar: 1/2" x 8.5" / Overall length 24.5" / Max Reach: 4". Comes Mounted with a Ci0 Carbide Cutter.
  • Never sharpen again! When cutter dulls, loosen screw, turn cutter 1/4 turn for new sharp edge, tighten screw down and start turning! . Stays sharp many times longer than steel.
  • Optional Cutter Available: Ci0-NR Patented Negative Rake Round Carbide Replacement Cutter. Negative Rake Carbide Cutters are AWESOME for turning resins, acrylics and extreme hardwoods.
  • Easy Wood Tools have a lower cost of ownership due to all you need is a lathe and Easy Wood Tools.
  • no need to purchase expensive re-sharpening equipment, plus our tools will not get shorter like high-speed steel which will eventually need replacing. Our tools are also safer due to turning on centerline = no catches..
  • Designed and Manufactured 100% in the USA.
Check Stock

YOYO TOOLS Lathe Turning Tools S08K-SCLCR06 Boring Bar and 5pcs CCMT060204 CCMT2 1.5 Carbide Inserts CNC Lathe Turning Tool S08K-SCLCR06 + 5pcs CCMT060204

  • CCMT060204 CCMT2(1.5) Carbide Inserts : carbide material with CVD coating ,used for machining stainless steel and steel parts.
  • Internal boring bar holder : High quality Steel Durable for Long , strong and durable ,95 degree right hand internal boring bar turning holder, the....
  • Shank Diameter : S08K-SCLCR06: 8mm/0.315'' , Overall Length: 125mm/4.92'' , T8 wrench , M2.5*6 screw , 95 degree right hand internal boring bar....
  • Widely Use: used for Cutting Steel parts and Stainless Steel, simple structure, often used for small hole machining..
  • Package Include : 1Pc S08K-SCLCR06 lathe boring bar with 5pcs CCMT060204 CCMT2(1.5)Carbide Inserts, T8 wrench, M2.5*6 screw.
Check Stock

YUFUTOL Carbide Tipped Wood Turning tools Lathe set (Finisher/Rougher/Detailer/Hollower Swan Neck Hollower with Solid Wood Handle)and Diamond/Round/Square Carbide Inserts

  • 【Upgraded Carbide Turning Tools Material】High-density tungsten carbide blades are made with high-speed steel blade material which will not wear off easily, stainless steel aluminum handles and a beautiful aluminum alloy case with sponge liner, excellent ergonomics and reliable grip, increased stability and shock resistance.
  • 【Adjustable Aluminum Handle Length】You can freely adjust the length of wood turning tools for lathe according to your preference, just fasten the two screws of the lathe turning tools with the accessory wrench then you can work which is convenient and flexible.
  • 【Replaceable Carbide Blade&Adjustable Sharpe Edges】Our carbide lathe tools matching carbide blades can be replaceable and we provide you with new cutting inserts and maximize cutting life. Each lathe chisel has a tungsten carbide tip with a rotatable, sharp edge. Once the edge becomes dull, you can always rotate the bit to get a new, sharper edge.
  • 【Carbide Lathe Tools Package】You will get 11" tool handle*1, 9.8" connected handle extension*1, 9.8"round turning tool*1, 9.8"diamond turning tool*1, 9.8"square turning tool*1, 9.8"r-shape turning tool*1, interchangeable carbide inserts*8, T15 wrench*1, allen wrench*1,screw*2, aluminum protective case with high elasti....
Check Stock

Drawings of Knives (Acoustic)

  • SIX GREAT WOOD CARVING TOOLS IN EACH ORDER: 6-piece Complete Professional Wood Marking/Striking Carving Drawing Knife Set with Sliding Bevel and Mortise/Marking Gauge & Wing Compass with Carbide Scribe.
  • MARKING GAUGE: Single brass pin on side for use as a standard, heavy-duty marking gauge. Brass thumb-screw locking mechanism. Constructed from polished hardwood, quality made to prevent wear..
  • 6-INCH WING COMPASS w/CARBIDE SCRIBER: This large, professional wing compass is for scribing arcs and circles, with an arced wing that helps to steady the legs in use, and with a locking screw on the arc to hold the legs firmly in position..
  • 9-INCH Sliding Bevel: Heavy-duty , professional commercial-grade durable construction using steel, brass and solid hardwood. Blade is easily tightened and secured using the brass wing nut tightener. A handy tool for angle layouts with high accuracy..
  • PROFESSIONAL-GRADEDOUBLE BEVEL MARKING & DIAMOND POINT STRIKING KNIIFE SET: These are our premium quality UJ Ramelson Co marking knife featuring razor sharp edges at the perfect angle for marking wood.....
Check Stock

Groovemaster Carbide Tungsten Steel Replacement Cutter Head for Golf Club Groove Sharpeners Made by Specialty Golf Products

  • GROOVEMASTER TUNGSTEN CARBIDE STEEL CUTTER HEAD is the replacement cutter head for ANY 6 Head Groove Sharpener made by Specialty Golf Products..
  • REPLACE EXISTING CUTTER HEAD EASILY using existing screw using standard and commonly found 2.5mm hex wrench as in image shown (wrench not provided). Takes less than 2 minutes to upgrade..
  • CLEANS, DEEPENS AND RESTORES WORN GROOVES with the best accuracy of any golf club groove tool on the market. Premium cutter head, made of tungsten carbide steel, cuts through standard steel, titanium and even maraging steel with unmatched ease..
  • MEASURING A HARDNESS OF 65 ON THE ROCKWELL SCALE, this premium cutter head is made from high grade precision tool vacuum heat-treated carbide tungsten steel. The Groovemaster Carbide Cutter Head is the ultimate solution for maximum durability and re-grooving effectiveness..
  • PRECISION GROUND AND ENGINEERED TO EXACTING TOLERANCES to ensure that it does not compromise USGA rules regarding groove width and depth..
Check Stock

Blue Boar Master Plumbers Kit-12 Sizes Mega Tungsten Carbide 2-1/4” Hole Saws. Cut 10x Faster, 3x Larger, 40x More Holes Using Cordless Drills. For Plywood, MDF, Particle Board, Hardie Board.

  • 12 Carbide Hole Saws: 3/4", 7/8", 1-1/8",1-3/8",1-1/2",1-3/4",2-1/4", 2-5/8", 3", 3-1/2", 4", 4-1/2".
  • One 5/8"-18 arbor with 7/16" shank, 1/2"-20 adapter, hex wrench.
  • NOT NAIL RESISTANT - 3 pilot bits (HSS twist, Carbide Masonry, Tungsten Carbide Tipped for woods).
  • 2-1/4" cutting depth best when USED with 18v Cordless Drill set on SCREW SETTING.
  • ****NOT for use with 1/2" stud drills such as Milwaukee Hole Hawg which will rip the teeth off ****.
Check Stock

SILIVN 5pcs Tungsten Carbide Cutters Inserts Set for Wood Lathe Turning Tools,(Include Square, Square With Radius,Round and Diamond Shaped Cutters) Supplied with 5 pcs Screws

  • 【Exterme Hard Material】:Made of solid tungsten steel,providing you a better experience and durable use..
  • 【Most Practical】:Easy to replace your jointers and planers. Unlike standard tools, when using carbide tipped cutter such as these, you keep the cutter straight in on the turning which produces a shearing action.When the carbide cutter finally dulls, simply loosen the screw that holds the cutter in place, rotate the cutter to a sharp, clean edge and then secure the cutter by tightening the screw..
  • 【 Perfect for Professional Carpenters and Beginners】:This is a free combination suit that meets the needs of roughing and finishing cutting, suitable for both professional carpenters and beginners..
  • 【Exteremely Professional】5 different sizes and 4 different shapes carbide inserts satisfy all you demand:Square With Radius (15x15x2.5mm-R50),Square(15x15x2.5mm-4R0.5), Square(14x14x2mm)Diamond Shaped (10mm X 28mm X 2.5mm with Round Point) Round (Ø16mm*3mm-30°).
  • 【Set includes the Cutters only】: Square Cutter *2(Supplied with M6-8 replacement screws ),Square With Radius Cutter*1(Supplied with M6-8 replacement screws ), Round Cutter*1(Supplied with M5-8 replacement screws ), Diamond Shaped Cutter*1(Supplied with M4-8 replacement screws ).....
Check Stock

Accusize Industrial Tools 7 Pieces/Set 1/2'' Indexable Carbide Turning Tool Set with 10 Extra Carbide Inserts in Fitted Box, 2387-2004plus

  • Model of each holder & the original insert: MGEHR08-2J (insert: MGMN200-M).
  • Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
Check Stock

GBJ 10pcs RCMT10T3M0 Gold + SRDCN 1616H10 5/8\ 45° Lathe Turning Holders Lathe Turning & Profiling Tool Holder for Round Carbide Inserts RCMT (SRDCN1616H10+RCMT10T3M0 YBC251)

  • Smooth finish on each turning tool holder marked with tool holder style and shank size..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Insert screw and wrench included, 9pcs indexable turning tool holder, 9pcs TiN Coated C6 carbide insert.
  • 9pcs hex screw, Hexagon key and Aluminum fitting case..
  • *** Insert kit Item#: 2988-0001INSERTS (Coming Soon)***.
Check Stock

Accusize Industrial Tools 3/4'' Shank 7 Pc Indexable Carbide Turning Tool Set with 10 Extra Carbide Inserts in Fitted Box, 2387-2006plus

  • Shank Size (H x W): 3/4" x 3/4". Overall Length: 4-1/2". Insert screw and wrench included.
  • Including 2 of MGMN300, 16ER, WCMT32.5, CCMT32.5, DCMT32.5 Carbide Inserts.
  • Black oxided smooth finish on each turning tool holder style and shank size..
  • Each tool holder comes with a C6 TiN coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Including: 7 pcs indexable turning tool holder.
  • The cutting-off tool can only do cut off jobs. In regard to the other regular cutting, it's better to use the other 6 pieces of the set..
Check Stock