Categories

Best Carbide Tipped

8' x 80T 8-Inch 80 Tooth Carbide Tip Circular Saw Brush Cutter Trimmer Weed Eater Blade (2 Pack)

  • UNIVERSAL FIT. It fit either 1" (25.4 mm) or 20 mm arbor.
  • Carbide Tipped Trimmer Brushcutter Blades 8" diameter - 80 Teeth brazed-welded.
  • Carbide tipped blade is estimated to last about 10 times longer than plain steel.
  • More teeth create more aggregate cutting surfaces for longer lasting durability.
  • Made by CE certified Manufacturer. Package included: 2 pcs 8" 80T Carbide Tip blades w/ washer.
Check Stock

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

  • 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
  • 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
  • 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
  • 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
  • 5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check Stock

HLOFIZI 1-3/8 Inch Hole Saw (35 MM) with Tungsten Carbide Tipped for Drilling Metal, Hardwood, Nail-Embedded Wood, Stainless Steel, Stucco and Wire Mesh Combination, Plaster, Cement Fiber Board

  • Tungsten carbide tipped teeth for extended cutting life, drilling clean holes, more efficiently. Up 10X longer life that 1-3/8” bi-metal hole saw.
  • Drills clean wood, wood with nails, hardy board, aluminum, metal, cast iron, stainless steel sheet, cement fiber board, sheetrock, plastic, fiberglass and more.
  • Carbide tooth makes cutting holes through stucco/plaster and wire mesh combination, wood and metal combination, faster and easier with less effort.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: fit 3/8" chuck.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 1-3/8 in. carbide tipped hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

MCJ TCT Tools Hole Saw Set of 6 Electrician Tungsten Carbide Tipped Hole Cutter Set with Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, and Plastic Sizes 7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2

  • Industrial grade high-quality T.C.T. Carbide ( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust-proof, sturdy, and durability.
  • Tungsten carbide tipped hole cutters are ideal for drilling steel plate, stainless steel, iron, aluminum, copper, cast iron, fiberglass, and plastic.
  • Manufactured with premium high-grade solid carbide tips for added strength and durability. Tipped teeth for extra lifespan with tip: up to 1/4" cutting depth for stainless steel with a hand drill, 1" depth with a drill press.
  • Designed for use in a chuck - can be used with drill press or a hand drill.
  • Includes Sizes: 7/8",1-1/8",1-3/8",1-3/4",2",2-1/2" Set comes with customized casse for portability and designated slots to keep everything in place.
Check Stock

WEN RB500-3 Heat-Treated Multi-Profile Carbide-Tipped Router Bit Set 3-Piece

  • Professional-grade heat-treated HSS design includes carbide tips for a long-lasting sharp edge.
  • Includes one 1/4 in. Straight 1-Flute Carbide-Tipped Router Bit with 1/4 in. Shank (Model RB003SF), 1/2 in. Flush Trim Carbide-Tipped Router Bit with....
  • Straight one-flute profile makes for perfect grooves and dadoes in your workpiece.
  • Flush trim profile helps replicate complex edges and create flush surfaces.
  • Roundover profile creates rounded edges to your workpiece.
Check Stock

Dark stone DS23295 Carbide-Tipped Band Saw Blade 105 Inch (105 x 3/4 x 2 TPI)

  • Carbide Tipped Band Saw blade for extreme long life and tooth sharpness.
Check Stock

MCJ Tools TCT Hole Saw Set of 8 Plumbers Tungsten Carbide Tipped Hole Cutter Set with Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, and Plastic Sizes 3/4",7/8",1",1-1/8",1-3/8",1-1/2",2",2-1/2"

  • Industrial grade high-quality T.C.T. Carbide ( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust-proof, sturdy, and durability.
  • Tungsten carbide tipped hole cutters are ideal for drilling steel plate, stainless steel, iron, aluminum, copper, cast iron, fiberglass, and plastic.
  • Manufactured with premium high-grade solid carbide tips for added strength and durability. Tipped teeth for extra lifespan with tip: up to 1/4" cutting depth for stainless steel with a hand drill, 1" depth with a drill press.
  • Designed for use in a chuck - can be used with drill press or a hand drill.
  • Included sizes: 3/4",7/8",1",1-1/8",1-3/8",1-1/2",2",2-1/2" Set comes with customized casse for portability and designated slots to keep everything in place.
Check Stock

Dark Stone DS23418 Carbide-Tipped Band Saw Blade 143 Inch x 3/4 Inch, 2 TPI for Tough resaw

  • The Dark Stone DS23405 Carbide Tipped Band Saw blade for extreme long life and tooth sharpness.
Check Stock

Whitney Tool 355070 Keyseat Milling Cutter Style 121 Carbide Tipped 507 10 7/8 Cutting Diameter 5/32 Cutting Width Stagger Tooth

  • Carbide tipped, stagger tooth style 121 #506 (8) 3/4" X 5/32".
  • Carbide tipped cutters cut 3 to 4 times faster than HSS cutters.
  • Increase production and reduce overall machining costs.
Check Stock

Dark stone band saw blade 93-1/2 inch (Thin-Type, 93-1/2 x 3/4 x 4TPI)

  • Fits most 14" Band Saw: Delta 28-475X, 28-206, 28-276.
  • Carbide Tipped Band Saw blade for extreme long life and tooth sharpness.
Check Stock

SKIL 75740W 7-1/4-Inch 40-Tooth Carbide Tipped Circular Saw Blade for SKIL Circular Saw 5280-01/5180-01/5080-01

  • Carbide teeth can last up to 60 times longer than standard steel blades.
  • Compatible with 7-1/4" diameter circular saws 5280-01/5180-01/5080-01.
  • Included components: 7-1/4-Inch 40-Tooth Carbide Tipped Saw Blade.
  • Enjoy smooth cutting performance for framing and general-purpose cutting with the Skil 40-Tooth Carbide-Tipped Saw Blade. It comes with sharp cutting edges and induction hardened teeth for durability. This 7-1/4" circular saw blade fits most standard circular saws. It comes with a clear, anti-stick coating that helps reduce friction and binding during use. The Skil saw blade also comes with a 5/8" diamond knock-out arbor to make installation and removal easy..
Check Stock

Korkers OmniTrax 3.0 Fishing Sole - Triple Threat with Carbide Spikes - Size 12

  • OMNITRAX 3.0: Korkers proprietary interchangeable sole technology allows for customized traction on the fly. Compatible with every pair of Korkers....
  • TRACTION: Aggressive rubber lug sole with 30 replaceable carbide-tipped studs per pair..
  • CUSTOMIZABLE: The Triple Threat Sole platform is a sticky rubber outsole with over-molded stainless-steel receptacles which accept any combination of....
  • Includes 30 pre-installed carbide-tipped studs that bite into smooth, slick surfaces ensuring long-lasting, positive traction in treacherous terrain..
Check Stock

Lenox Tools 1211932DGHS 32 Diamond Grit Hole Saw 2-Inch or 50.8mm red

  • LENOX Diamond hole saw has a brazed diamond edge for more holes in tile and stone.
  • Diamond-tip hole saw has a durable, robust design for greater versatility in tough applications.
  • Diamond-tipped hole saw cuts holes in less time than carbide-grit or carbide-tipped hole saws.
  • Round holes make removing plugs faster and easier.
  • Uses a 2L, 3L, 6L or 7L standard arbor or a 2L or 6L SNAP-BACK arbor.
Check Stock