Categories

Best Carbide Tipped Chisels

tonchean Rotary Hammer Drill Bits Set 17 PCS SDS Plus 40Cr Carbon Steel Concrete Masonry Chisel Set with Storage Carrying Case - 4 Flutes Drill Bit Carbide Tipped for Brick, Stone and Concrete

  • 【High Quality Carbide Material】The concrete drill bits are tipped with durable YG8C tungsten carbide and with 40Cr carbon steel body. They are harder, tougher and more resistant and durable to extreme loads for longer tool life and faster performance in masonry.
  • 【Universal Connection Design】Enhanced 4 flute design reduces stress and helps the bit run cooler, and for fast dust removal..
  • 【Multifunctional Using】The SDS - PLUS shank is suitable for most rotary hammer drill. The bit set includes 13pcs drill bits with 5.5 mm, 6 mm, 6.5 mm, 7 mm, 8 mm, 10 mm, 12 mm, 14 mm, 16 mm , 1 point chisel, 2 flat chisel and 1 U-groove chisel..
  • 【Easy To Use】The 17Pcs hammer drill sds bits can be exchanged easy and quickly, according to different work require..
  • 【Widely Application】4pcs chisels included, those are constructed of rugged 40Cr carbon steel, for cutting concrete, asphalt or masonry and bull point chisel for heavy duty concrete breaking..
Check Stock

Indexable Lathe Turning Tool,1/2\ Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • Upgraded Design and Materials: The Tipped Woodturning Tool tips are made of tungsten carbide material, which makes the cutter stronger and sharper, improves the working efficiency and increases the service life of the cutter head. The shank is made of stainless steel, which is strong and wear-resistant. The handle is made of aluminum oxide with a polished surface, smooth to the touch, comfortable and durable..
  • Package Contains: ① 2PCS Tool Handle 11 in.
  • ⑤ 1PCS Carbide Tipped Swan Neck Hollower 10 in.
  • Easy to Use: New double control fixed design, makes the knife body more firm, prevents looseness and knife warping during operation. The sharp high-density tungsten carbide lathe blade makes cutting wood extremely easy, and the interchangeable and replaceable cutter head allows you to change at any time..
  • Details Oriented: 19 IN-28 IN Adjustable length Wood Turning Tools, Rougher /Detailer/Finisher/Swan Neck Hollower four kinds of head freely switch, can meet the working requirements in various scenarios. Square shaft profiles help to keep tools flat on t....
Check Stock

IRWIN Tools Polycrystalline Diamond-Tipped Fiber Cement Circular Saw Blade, 7 1/4-inch, 4-Tooth (4935473)

  • Polycrystalline, diamond-tipped teeth provide longer circular saw blade life.
  • Circular saw blades last up to 15x longer compared to standard carbide-fiber cement blades.
  • Circular saw blade creates less dust compared to a standard carbide-fiber cement blade.
  • Cuts up to 9,000' or 5 stacks of fiber cement.
Check Stock

HLOFIZI 6 Inch Hole Saw Tungsten Carbide Tipped for Recessed Lights, Drilling Metal, Hardwood, Nail-Embedded Wood, Stucco and Wire Mesh Combination, Plaster, Cement Fiber Board

  • Tungsten carbide tipped teeth for extended cutting life, drilling clean holes, more efficiently. Up 10X longer life that 6” bi-metal hole saw.
  • Drills clean wood, wood with nails, hardy board, aluminum, metal, cast iron, stainless steel sheet, cement fiber board, sheetrock, plastic, fiberglass. Also Ideal for recessed lights.
  • Carbide tooth makes cutting holes through stucco/plaster and wire mesh combination, wood and metal combination, faster and easier with less effort.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: fit 3/8" chuck.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 6 in. carbide tipped hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

8' x 80T 8-Inch 80 Tooth Carbide Tip Circular Saw Brush Cutter Trimmer Weed Eater Blade (2 Pack)

  • UNIVERSAL FIT. It fit either 1" (25.4 mm) or 20 mm arbor.
  • Carbide Tipped Trimmer Brushcutter Blades 8" diameter - 80 Teeth brazed-welded.
  • Carbide tipped blade is estimated to last about 10 times longer than plain steel.
  • More teeth create more aggregate cutting surfaces for longer lasting durability.
  • Made by CE certified Manufacturer. Package included: 2 pcs 8" 80T Carbide Tip blades w/ washer.
Check Stock

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

  • 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
  • 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
  • 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
  • 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
  • 5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check Stock

HLOFIZI 1-3/8 Inch Hole Saw (35 MM) with Tungsten Carbide Tipped for Drilling Metal, Hardwood, Nail-Embedded Wood, Stainless Steel, Stucco and Wire Mesh Combination, Plaster, Cement Fiber Board

  • Tungsten carbide tipped teeth for extended cutting life, drilling clean holes, more efficiently. Up 10X longer life that 1-3/8” bi-metal hole saw.
  • Drills clean wood, wood with nails, hardy board, aluminum, metal, cast iron, stainless steel sheet, cement fiber board, sheetrock, plastic, fiberglass and more.
  • Carbide tooth makes cutting holes through stucco/plaster and wire mesh combination, wood and metal combination, faster and easier with less effort.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: fit 3/8" chuck.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 1-3/8 in. carbide tipped hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

MCJ TCT Tools Hole Saw Set of 6 Electrician Tungsten Carbide Tipped Hole Cutter Set with Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, and Plastic Sizes 7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2

  • Industrial grade high-quality T.C.T. Carbide ( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust-proof, sturdy, and durability.
  • Tungsten carbide tipped hole cutters are ideal for drilling steel plate, stainless steel, iron, aluminum, copper, cast iron, fiberglass, and plastic.
  • Manufactured with premium high-grade solid carbide tips for added strength and durability. Tipped teeth for extra lifespan with tip: up to 1/4" cutting depth for stainless steel with a hand drill, 1" depth with a drill press.
  • Designed for use in a chuck - can be used with drill press or a hand drill.
  • Includes Sizes: 7/8",1-1/8",1-3/8",1-3/4",2",2-1/2" Set comes with customized casse for portability and designated slots to keep everything in place.
Check Stock

WEN RB500-3 Heat-Treated Multi-Profile Carbide-Tipped Router Bit Set 3-Piece

  • Professional-grade heat-treated HSS design includes carbide tips for a long-lasting sharp edge.
  • Includes one 1/4 in. Straight 1-Flute Carbide-Tipped Router Bit with 1/4 in. Shank (Model RB003SF), 1/2 in. Flush Trim Carbide-Tipped Router Bit with....
  • Straight one-flute profile makes for perfect grooves and dadoes in your workpiece.
  • Flush trim profile helps replicate complex edges and create flush surfaces.
  • Roundover profile creates rounded edges to your workpiece.
Check Stock

Dark stone DS23295 Carbide-Tipped Band Saw Blade 105 Inch (105 x 3/4 x 2 TPI)

  • Carbide Tipped Band Saw blade for extreme long life and tooth sharpness.
Check Stock

MCJ Tools TCT Hole Saw Set of 8 Plumbers Tungsten Carbide Tipped Hole Cutter Set with Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, and Plastic Sizes 3/4",7/8",1",1-1/8",1-3/8",1-1/2",2",2-1/2"

  • Industrial grade high-quality T.C.T. Carbide ( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust-proof, sturdy, and durability.
  • Tungsten carbide tipped hole cutters are ideal for drilling steel plate, stainless steel, iron, aluminum, copper, cast iron, fiberglass, and plastic.
  • Manufactured with premium high-grade solid carbide tips for added strength and durability. Tipped teeth for extra lifespan with tip: up to 1/4" cutting depth for stainless steel with a hand drill, 1" depth with a drill press.
  • Designed for use in a chuck - can be used with drill press or a hand drill.
  • Included sizes: 3/4",7/8",1",1-1/8",1-3/8",1-1/2",2",2-1/2" Set comes with customized casse for portability and designated slots to keep everything in place.
Check Stock

Dark Stone DS23418 Carbide-Tipped Band Saw Blade 143 Inch x 3/4 Inch, 2 TPI for Tough resaw

  • The Dark Stone DS23405 Carbide Tipped Band Saw blade for extreme long life and tooth sharpness.
Check Stock

Whitney Tool 355070 Keyseat Milling Cutter Style 121 Carbide Tipped 507 10 7/8 Cutting Diameter 5/32 Cutting Width Stagger Tooth

  • Carbide tipped, stagger tooth style 121 #506 (8) 3/4" X 5/32".
  • Carbide tipped cutters cut 3 to 4 times faster than HSS cutters.
  • Increase production and reduce overall machining costs.
Check Stock