Categories

Best Carbide Tipped Reamer

29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56018P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

15/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56069P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #3, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56068P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

13/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56065P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 3/8 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1 3/16\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56026P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 3/4 " flute length, Partial Flute Length Carbide.
  • 1" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1 7/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56080P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 2" flute length, Partial Flute Length Carbide.
  • Morse taper shank #4, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1 5/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56078P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 7/8 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #4, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

IRWIN Tools Polycrystalline Diamond-Tipped Fiber Cement Circular Saw Blade, 7 1/4-inch, 4-Tooth (4935473)

  • Polycrystalline, diamond-tipped teeth provide longer circular saw blade life.
  • Circular saw blades last up to 15x longer compared to standard carbide-fiber cement blades.
  • Circular saw blade creates less dust compared to a standard carbide-fiber cement blade.
  • Cuts up to 9,000' or 5 stacks of fiber cement.
Check Stock

HLOFIZI 6 Inch Hole Saw Tungsten Carbide Tipped for Recessed Lights, Drilling Metal, Hardwood, Nail-Embedded Wood, Stucco and Wire Mesh Combination, Plaster, Cement Fiber Board

  • Tungsten carbide tipped teeth for extended cutting life, drilling clean holes, more efficiently. Up 10X longer life that 6” bi-metal hole saw.
  • Drills clean wood, wood with nails, hardy board, aluminum, metal, cast iron, stainless steel sheet, cement fiber board, sheetrock, plastic, fiberglass. Also Ideal for recessed lights.
  • Carbide tooth makes cutting holes through stucco/plaster and wire mesh combination, wood and metal combination, faster and easier with less effort.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: fit 3/8" chuck.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 6 in. carbide tipped hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

8' x 80T 8-Inch 80 Tooth Carbide Tip Circular Saw Brush Cutter Trimmer Weed Eater Blade (2 Pack)

  • UNIVERSAL FIT. It fit either 1" (25.4 mm) or 20 mm arbor.
  • Carbide Tipped Trimmer Brushcutter Blades 8" diameter - 80 Teeth brazed-welded.
  • Carbide tipped blade is estimated to last about 10 times longer than plain steel.
  • More teeth create more aggregate cutting surfaces for longer lasting durability.
  • Made by CE certified Manufacturer. Package included: 2 pcs 8" 80T Carbide Tip blades w/ washer.
Check Stock

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

  • 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
  • 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
  • 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
  • 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
  • 5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check Stock

HLOFIZI 1-3/8 Inch Hole Saw (35 MM) with Tungsten Carbide Tipped for Drilling Metal, Hardwood, Nail-Embedded Wood, Stainless Steel, Stucco and Wire Mesh Combination, Plaster, Cement Fiber Board

  • Tungsten carbide tipped teeth for extended cutting life, drilling clean holes, more efficiently. Up 10X longer life that 1-3/8” bi-metal hole saw.
  • Drills clean wood, wood with nails, hardy board, aluminum, metal, cast iron, stainless steel sheet, cement fiber board, sheetrock, plastic, fiberglass and more.
  • Carbide tooth makes cutting holes through stucco/plaster and wire mesh combination, wood and metal combination, faster and easier with less effort.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: fit 3/8" chuck.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 1-3/8 in. carbide tipped hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

MCJ TCT Tools Hole Saw Set of 6 Electrician Tungsten Carbide Tipped Hole Cutter Set with Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, and Plastic Sizes 7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2

  • Industrial grade high-quality T.C.T. Carbide ( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust-proof, sturdy, and durability.
  • Tungsten carbide tipped hole cutters are ideal for drilling steel plate, stainless steel, iron, aluminum, copper, cast iron, fiberglass, and plastic.
  • Manufactured with premium high-grade solid carbide tips for added strength and durability. Tipped teeth for extra lifespan with tip: up to 1/4" cutting depth for stainless steel with a hand drill, 1" depth with a drill press.
  • Designed for use in a chuck - can be used with drill press or a hand drill.
  • Includes Sizes: 7/8",1-1/8",1-3/8",1-3/4",2",2-1/2" Set comes with customized casse for portability and designated slots to keep everything in place.
Check Stock