Categories

Best Carbide Tipped Tool Holder

RYOBI Drill and Impact Drive Kit (95-Piece) with Carry CASE

  • KIT INCLUDES: 19 x Split Point Oxide Drill Bits, 1 x 1” Hex Shank Spade Bit, 4 x Carbide Tipped Masonry Drill Bits, 4 x Brad Point Drill Bits, 1 x 2-1/8“ Hole Saw, 1 x Hole Saw Mandrel, 5 x Hex Shank Nut Setters, 20 x 1” Insert Bits, 1 x Magnetic Bit Holder, 1 x Countersink, 1 x Center Punch, 1 x Hex Key, 1 x Carrying Case.
  • BLACK OXIDE COATING keeps some of these bits protected from corrosion and prolonged wear.
  • HOLE SAW MANDREL holds a hole saw and drill bit in place so you can bore holes for door knobs or locks with a power drill.
  • MAGNETIC BIT HOLDER holds drill bits for driving fasteners without a tool.
  • CARRYING CASE has mounting brackets and a handle for maximum storage and portability.
Check Stock

Savannah 3 Piece Carbide Mini Turning Tool Set with Flush Fit Comfort Grip Hardwood Handles | Heavy Duty Steel Riveted Ferrules and 2 ea Round 2 ea Square and 2 ea Diamond Shaped Carbide Cutters

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. We all know how "enjoyable" sharpening our turning tools can be. We also know....
  • When the carbide cutter on the tool finally dulls, simply loosen the cutter screw, rotate the tip and secure the screw for a fresh, clean cutting....
  • Unlike standard wood turning tools, when using carbide tipped cutters, you keep the cutter straight in on the object you are turning. This produces a....
  • Each mini turning tool has a Flush Fit Comfort Grip handle. Each handle is approx. 9-1/8" long and has a heavy duty steel ferrule for added strength....
  • The set includes 1 ea. round tool, 1 ea. square tool, 1 ea. diamond shaped tool, 2 ea. round carbide cutters, 2 ea. square carbide cutters, 2 ea.....
Check Stock

PSI Woodworking LCHOL3C Wood Lathe Carbide Tip Mini Hollowing Tool 3pc Chisel Set

  • Create small bowls and hollow vessels on your woodturning lathe with this carbide tipped hollowing tool chisel system.
  • Includes (3) tools with 6mm carbide cutters: Straight, Medium-angle Swan Neck, Steep-angle Swan Neck.
  • Overall length of each tool is 15" with 10" handle and 5" blade.
  • Also includes hex wrench, wooden storage case, and instructions.
  • Replaceable 6mm Carbide Cutters (LCHOL3CX) are available.
Check Stock

Savannah - 7586 Carbide Turning Tool Large Size (3 Piece Set - All 3 Turning Tools) Includes Diamond Shape, Round and Square Turning Tools With Comfort Grip Handles, Three Tool Set

  • ●PACKAGE : you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 11 pieces CNMG 431,11 pieces WNMG 431, 11 pieces TNMG 331 indexable carbide turning insert blades, cufficient quantity and easy to replace..
  • ●MATERIAL : lathe indexable carbide turning tool holders are made of quality 40Cr steel.
  • The 40Cr steel material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use TIN coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability..
  • ●SIZE : diameter of the holder is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • each tool holder has a black oxidized smooth surface..
  • ●EASY TO STORE : 33pieces indexable carbide turning inserts into 3 plastic boxes , each turning tool holder is placed in a plastic box, and Each box has a clear mark for easy identification of the product model, safe and easy to store..
  • ●MAYBE YOU NEED : If you need 5/8" left hand turning holder set, you can search for ASIN : B07B8XNH98 to buy it..
Check Stock

PSI Woodworking LCWIZSK Carbide Wizard Super Skew Chisel

  • All the benefits of a traditional skew with the results of a carbide tipped chisel. Overall length is 13. 5". Blade is 4" long. Includes a wrench for the tip screw and instructions. Replacement tip screw and wrench (LCWIZSY) are available..
  • Gentle 2" Radius edge and angled blade works closer to the slicing action of a traditional skew, lowering the stress on the turning material and tool. Slices through wood or acrylic for smooth, clean cuts. Reduces chipping. Less sanding needed..
  • Super sharp 4-sided replaceable carbide tip (LCWIZSX). ergonomic handle. Will wiz through wood and acrylic for faster results and eliminate the need for sharpening. The angled blade provides a consistent holding position..
  • Designed to solve a recurring issue with carbide chisels.
  • almost all carbide chisels are scrapers..
  • While the blade on a scraper maintains a sharp edge, the method of holding the blade causes the edge to drag across surface of material, which can promote tool chatter, chipping, and shattering of turning materials..
Check Stock

DIABLO Bi-Metal and Carbide Tipped Hole Saw Set (9-Piece)

  • The Diablo 9-Piece Hole Saw Kit features five hole saw cups (bi-metal and carbide tipped) and Diablo's four piece SnapLock PLUS mandrel system for quick and easy hole saw cup changes for maximum job performance. This new, high performance hole saw set delivers faster cutting performance and increased productivity versus standard bi-metal and carbide-tipped hole saws. Unlike anything on the market, Diablos hole saws and SnapLock Plus mandrel system simplify the attachment process for fast and efficient hole saw mounting. These radical new hole saws provide ultimate cutting length to bore deeper holes in a single pass.
  • and tool-free plug ejection and Variable Tooth Design for faster cuts..
Check Stock

Makita 4131 7-1/4\ Metal Cutting Saw

  • Powerful 13.0 AMP motor cuts through various types of metal.
  • Heavy duty blade cover provides increased chip protection.
  • CERMET-tipped blades are made with a special Ceramic-Metal mixture that resists heat, which can shorten the life of traditional carbide tipped blades.
  • Tool-less blade cover removal and chip collection window for operator convenience.
Check Stock

ASZLBYM 3/8\ Lathe Threading Turning Tool Holder SER1010H11 with Indexable Carbide Threading Turning Insert 11ER A60 (3/8\ Holder + 11ER A60 Insert)

  • PACKAGE INCLUDES : You will receive 1 pieces SER1010H11 3/8”/10mm shank diameter lathe turning tool holder , 11pcs 11ER A60 threading carbide turning inserts and 1pc T8 wrench..
  • Material : The SER1010H11 3/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 3/8"*3/8"(10mm*10mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm..
  • Easy to store: the metal lathe cutting turning tool holder and threading carbide turning inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock

Amana Tool 55227 Carbide Tipped 82 Degree Countersink Set with Adjustable Drill Bit Depth Stop and No-Thrust Ball Bearing 3/8 Dia x 1/8 Drill Dia x 1/4 Inch Quick Release Hex Shank

  • IDEAL FOR EVERY WOODWORKER – 82 Degree Countersink set with Adjustable Drill Bit Depth Stop and No-Thrust Ball Bearing..
  • SET INCLUDES – Drill bits set includes a countersink bit, a slow spiral, HSS M2 fully ground drilling bit, and a quick-release 1/4" hex shank..
  • EXCELLENT FOR CUTTING – Use the drill bits for wood-working of Natural Woods, Man-Made Boards, MDF, Chipboard, Plywood, Aluminum/Non-Ferrous, Aluminum Composite Material (ACM), Decking Materials, High Density Polyethylene (HDPE)..
  • CARBIDE TIPPED – Special carbide-tipped drill bits made for long-lasting cutting edge performance and tool life..
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools..
Check Stock

ASZLBYM 21PCS 1/2\/12mm Shank Indexable Carbide Lathe Turning Insert Tool Holder Bit Set for Turning Grooving Threading Boring with Indexable Carbide Turning Insert CCMT21.51 DCMT 16ER 11IR MGMN200-G

  • ♥PACKAGE INCLUDES : 7 pieces 12mm / 1/2”shank indexable carbide lathe turning tool holders( SDNCN1212H07, SDJCR1212H07, SCLCR1212H06, SER1212H16, MGEHR1212-2, S12M-SCLCR06, SNR0012M11), 14 pieces indexable carbide inserts(CCMT21.51, DCMT21.51, 11IR A60, MGMN200-G, 16ER A60), 7 pieces wrenches..
  • ♥Each tool holder comes with a C6 TiN Coated indexable carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • ♥7 PIECES LATHE INSERT TOOL HOLDERS : the material of the holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, boring, facing, external grooving, etc..
  • ♥14 PIECES INDEXABLE CARBIDE INSERTS: the material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability..
Check Stock

OSCARBIDE 5/16

  • Mini Turning Tool holders with 1/16'' Shank, 5ps/set AL, AR, BL, BR, and E Tool Holders with 5 TCMT C-6 Inserts.
  • Multiple cutting surfaces available provide longer tool life,Carbide Inserts can be rotated to a new cutting edge without changing the position of the tool holder.
  • Positive rake cutting and built-in chip breaker groove,for Turning, Cutting, Facing, Boring, and Chamfering.
  • Carbide insert is coated with tin to provide long life and sharpness,higher temperatures than ordinary steel tools .turning tool holder is made of high-quality steel, coated with nickel for durability,moisture proof and resistant to rusting and corrosion..
  • 5pcs in a wooden case for safe storage, the carbide inserts replacement TCMT090204,please search the Asin B07SJX9YNR to buy it on amazon..
Check Stock

Tongue and Groove Router Bit Set SellyOak 1/4 Shank Tongue and Groove Router Bits + 1/4 Shank 45° Lock Miter Router Bit（1/2 Inch Stock） on Router Table/Base Router etc.

  • ▲Versatile Woodworking Tool Kit - Complete your hardwood tool collection with Tongue and Groove Router Bit set and 45 degree Lock Miter Joint Router....
  • ▲Durable Material&Construction - This carbide tipped router bits are built to last and are constructed using high quality materials. This durable....
  • ▲For Cutting Various Materials - Suitable for wood, MDF, chipboard, compact plywood panel.
  • Please DON'T cut ferrous metals and other materials such....
  • ▲Precise&Neat Cuts&Joints Every Time - Including Tongue and Groove Router Bit & 45°Lock Miter Bit, 3 pieces in total perfect for woodworking,....
  • ▲Wide in Use - This reliable carbide tipped router bits set is ideal for kitchen and bathroom doors, office cabinets, floor tables, bedroom shelves,....
Check Stock

Accusize Industrial Tools 7 Pieces/Set 1/2'' Indexable Carbide Turning Tool Set with 10 Extra Carbide Inserts in Fitted Box, 2387-2004plus

  • Model of each holder & the original insert: MGEHR08-2J (insert: MGMN200-M).
  • Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
Check Stock