Categories

Best Carbide Turning Tool Bit

Urbansential Woodturning Bowl Gouge Set, 3 Pieces 22.5 inch Wood Lathe Turning Tools, 1/4 Flute, 3/8 and 1/2 with High Speed Steel Blades, Beech Handles Brass Ferrules, in Wooden Storage Case

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The Savannah Carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head..
  • All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. Once the cutter head is completely used, simply replace it with a new carbide cutter..
  • To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly..
  • The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the end to the stainless steel ferrule. With the Savannah Large Carbide Turning Tool, you can get right to turning without all the fuss..
  • Set includes the Large Round (# 7537), Square (# 7538) and Diamond (# 7539....
Check Stock

Savannah - 7586 Carbide Turning Tool Large Size (3 Piece Set - All 3 Turning Tools) Includes Diamond Shape, Round and Square Turning Tools With Comfort Grip Handles, Three Tool Set

  • ●PACKAGE : you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 11 pieces CNMG 431,11 pieces WNMG 431, 11 pieces TNMG 331 indexable carbide turning insert blades, cufficient quantity and easy to replace..
  • ●MATERIAL : lathe indexable carbide turning tool holders are made of quality 40Cr steel.
  • The 40Cr steel material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use TIN coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability..
  • ●SIZE : diameter of the holder is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • each tool holder has a black oxidized smooth surface..
  • ●EASY TO STORE : 33pieces indexable carbide turning inserts into 3 plastic boxes , each turning tool holder is placed in a plastic box, and Each box has a clear mark for easy identification of the product model, safe and easy to store..
  • ●MAYBE YOU NEED : If you need 5/8" left hand turning holder set, you can search for ASIN : B07B8XNH98 to buy it..
Check Stock

Savannah Carbide Tip Turning Tool Large Size Round Cutter

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind.....
  • All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of....
  • To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The....
  • The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the butt to the stainless steel....
  • The round tool measures appx. 6-9/16" from the tip of the cutter to the ferrule.
Check Stock

Savannah Carbide Tip Turning Tool Large Size Square Cutter

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind.....
  • All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of....
  • To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The....
  • The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the butt to the stainless steel....
  • The square tool measures appx. 6-9/16" from the tip of the cutter to the ferrule.
Check Stock

Savannah 3 Piece Carbide Mini Turning Tool Set with Flush Fit Comfort Grip Hardwood Handles | Heavy Duty Steel Riveted Ferrules and 2 ea Round 2 ea Square and 2 ea Diamond Shaped Carbide Cutters

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. We all know how "enjoyable" sharpening our turning tools can be. We also know....
  • When the carbide cutter on the tool finally dulls, simply loosen the cutter screw, rotate the tip and secure the screw for a fresh, clean cutting....
  • Unlike standard wood turning tools, when using carbide tipped cutters, you keep the cutter straight in on the object you are turning. This produces a....
  • Each mini turning tool has a Flush Fit Comfort Grip handle. Each handle is approx. 9-1/8" long and has a heavy duty steel ferrule for added strength....
  • The set includes 1 ea. round tool, 1 ea. square tool, 1 ea. diamond shaped tool, 2 ea. round carbide cutters, 2 ea. square carbide cutters, 2 ea.....
Check Stock

ASZLBYM 3/8\ Lathe Threading Turning Tool Holder SER1010H11 with Indexable Carbide Threading Turning Insert 11ER A60 (3/8\ Holder + 11ER A60 Insert)

  • PACKAGE INCLUDES : You will receive 1 pieces SER1010H11 3/8”/10mm shank diameter lathe turning tool holder , 11pcs 11ER A60 threading carbide turning inserts and 1pc T8 wrench..
  • Material : The SER1010H11 3/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 3/8"*3/8"(10mm*10mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm..
  • Easy to store: the metal lathe cutting turning tool holder and threading carbide turning inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock

Woodturning Carbide Lathe Tools 17” Full Size Wood Turning Tool Set of 3 Rougher Detailer Finisher Includes Replacement Cutter Inserts 6 pcs – Diamond Round and Square Screws and Key Star Wrenches

  • ✅ CARBIDE WOODTURNING TOOLS - Our lathe turning tools has greatly simplified wood turning, This set of carbide lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable. Each lathe chisel features a carbide tip with multiple sharp edges that can be rotated several times, Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood..
  • ✅ CARBIDE TURNING TOOLS SET - Premium quality CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
  • ✅ ERGONOMICS TOOL HANDLE - Hard and Solid beech wood，Ergonomics design makes it more comfortable while doing turning job. Unlike the aluminum handle wood turning tool on the market which comes with only one handle, which means you have to change out the bar every time you want to switch tools..
  • ✅ WOODTURNING TOOLS & ACCESSORIES - Set includes 3 turning tools : rougher tip – Square 15 x 15 x 2.5mm R50, detailer tip – Diamond 10x28m with Radius point , finisher, with extra sets of carbide inserts. Set comes with extra replaceable carbide insert: 3 Sets of indexable Re....
Check Stock

33 Pieces Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 30 CNMG 431 + WNMG 431 + TNMG 331 Metal Indexable Carbide Turning Insert Blades

  • Package: you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 3 pieces carbide inserts and 10 pieces CNMG 431,10 pieces WNMG 431, 10 pieces TNMG 331 metal indexable carbide turning insert blades, cufficient quantity and easy to replace.
  • Material: lathe indexable carbide turning tool holders are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability.
  • Size: diameter of the handle is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and accuracy have reached the first grade.
  • Easy to store: insert 30 pieces of cemented carbide into 3 boxes, and put them in a plastic container, safe and easy to store, compatible with MTJNL1616H16, MWLNL1616H08, MCLNL1616H12 or MTJNR1616H16, MWLNR1616H08, MCLNR1616H12.
Check Stock

Hollower Swan Neck Woodturning Lathe Tipped Tool Bended Lathe Chisel Tool Hollower with 12mm Round Carbide Insert and a Screw and star key wrench for wood hobbyist or DIY or carpenter, RC-12

  • ✅ CARBIDE WOODTURNING TOOLS - Our lathe turning tools has greatly simplified wood turning, This set of carbide lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable. Each lathe chisel features a carbide tip with multiple sharp edges that can be rotated several times, Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood..
  • ✅ CARBIDE TURNING TOOLS SET - Premium quality CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
  • ✅ ERGONOMICS TOOL HANDLE - Hard and Solid beech wood，Ergonomics design makes it more comfortable while doing turning job. Unlike the aluminum handle wood turning tool on the market which comes with only one handle, which means you have to change out the bar every time you want to switch tools..
  • ✅ WOODTURNING TOOLS & ACCESSORIES - Set includes 3 turning tools : rougher tip – Square 15 x 15 x 2.5mm R50, detailer tip – Diamond 10x28m with Radius point , finisher, with extra sets of carbide inserts. Set comes with extra replaceable carbide insert: 3 Sets of inde....
Check Stock

IRONWALLS Carbide Wood Lathe Turning Tools Set, Carbide Tipped Turning Chisels for Lathe Include Finisher, Rougher, Detailer, Carbide Lathe Tools Woodworking with Interchangeable Handle & 8PCS Inserts

  • 【Complete Wood Turning Chisels Carbide】IRONWALLS carbide tipped wood lathe turning tools set for woodworking includes 1 x 11.2” Interchangeable grip handle, 1 x 10.6” Extension Rod, 4 x 9.6” stainless steel arbor shafts, 2 x round inserts, 2 x square inserts, 2 x diamond inserts, 2 x square circle inserts, 1 x T15 wrench, 1 x L-shape wrench and beautifully packaged in an easy-to-store & carry aluminum box..
  • 【Adjusted Freely for Different Applications】Designed with a small lock on the lathe tool handle and coming with a removable extension rod, you can adjust the length of the shafts and the overall length of the carbide lathe tools woodworking freely. Furthermore, this wood turning lathe kit includes 4pcs shafts with 8pcs carbide inserts, which does not need to frequently change inserts in complex turning tool projects so that improving the working efficiency..
  • 【Rotatable Blade Insert Design】Per piece of carbide insert tip is designed with four indexable tungsten carbide edges, which are sharp, solid and wear-resistant. When one edge of the cutter head is blunt, you can turn it to a new edge, which makes the blade can be used for a longer time, money saving. Furthermore, there are 8pcs carbide wood lathe tools blade inserts replacemen....
Check Stock

5/8\ 2PCS CNC Lathe Carbide Indexable Threading Turning Tool Holder SER1616H16 + SEL1616H16 with 2PCS 16ER/IR AG60 BP010 Indexable Carbide Turning Insert Blade

  • PACKAGE INCLUDES : You will receive 1 pieces SER1616H16 5/8”/16mm shank diameter lathe turning tool holder , 1pcs SEL1616H16 5/8”/16mm shank diameter lathe turning tool holder,1pc 16ER AG60 threading carbide turning insert,1pc 16IR AG60 threading carbide turning insert and 2pcs T15 wrenches..
  • Material : The SER/L1616H16 5/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 5/8"*5/8"(16mm*16mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 3mm..
  • If you need more inserts,you can search for ASIN:B07FFR8K53(16ER AG60) or B07FFPFT93(16IR AG60) ..
Check Stock

OSCARBIDE 5/16

  • Mini Turning Tool holders with 1/16'' Shank, 5ps/set AL, AR, BL, BR, and E Tool Holders with 5 TCMT C-6 Inserts.
  • Multiple cutting surfaces available provide longer tool life,Carbide Inserts can be rotated to a new cutting edge without changing the position of the tool holder.
  • Positive rake cutting and built-in chip breaker groove,for Turning, Cutting, Facing, Boring, and Chamfering.
  • Carbide insert is coated with tin to provide long life and sharpness,higher temperatures than ordinary steel tools .turning tool holder is made of high-quality steel, coated with nickel for durability,moisture proof and resistant to rusting and corrosion..
  • 5pcs in a wooden case for safe storage, the carbide inserts replacement TCMT090204,please search the Asin B07SJX9YNR to buy it on amazon..
Check Stock

Simple Woodturning Tools Carbide Lathe Turning Tool Set of 3 Full Size with 17 Foam Grip Handles USA Made

  • American Made Set of 3 Full Size Carbide Lathe Turning Tools with Color Coded Handles: Hollower, Detailer & Rougher.
  • 17" long solid aluminum foam grip tool handles are color coded for easy tool identification. Overall tool & handle length is 26.5"..
  • This set of carbide lathe tools is ideal for turners at any skill level. With carbide it's all turning and no sharpening so you can begin turning....
  • Each lathe tool is 1/2" square CNC machined by Harrison Specialties in Ramsey, Minnesota. These tools are designed to be kept flat on the tool rest....
  • Each lathe tool features a carbide tip with multiple sharp edges that can be rotated several times. A Torx star wrench is included..
Check Stock