Categories

Best Carbon Steel Bright Bar

AOOTF License Plate Frame with Light Bar Assembly- LED License Plate Light Lamp Bulbs & Stainless Steel Carbon Fiber Car Tag Holder Mount Kit for Truck SUV Trailer, 12V Waterproof White, Screws Caps

  • ...se plate hole distance , flexible and simple installation.
  • Stainless Steel License Plate Frame- The heavy duty frame is made of 304 stainless steel, aggressively resists rust, chemicals, petrochemicals, acidic and environmental contaminants such as salt, protect the License Plate Rust Proof. Metal car license frame, carbon pattern printed on the surface (Not Real Carbon Fiber License Plate Frame). 3D Twill weave pattern carbon printing, clear, will not fade, more cost-effective than real carbon holder.
  • Universal Frame For Front or Rear Plate- The carbon fiber license plate frame is designed according to the USA standard license plate, suitable for all 12*6 inch plates in the United States/Canada. Unique Slim edge design, Will not cover the stickers on the left and right upper corners of the metal license plate, and guarantee legal street. The license plate light bar adopts a 2-hole lug design, and the mount hole distance is the same as the plate, and it is universally installed.
  • Easy To Install- The plate light assembly adopts two wires design, red for positive and black for negative. Use the enclosed license plate mounting hardware to install the lights. M6*20mm stainless steel screws are suitable for plate mount of most models. Carbon screw caps can w....
Check Stock

0.028 (24 ga.) x 12\ x 24\

  • 1095 blade steel specifications: 6 inches wide * 12 inches long * 0.16 inches thick.
  • Create your own custom knife that will last a lifetime. Made from high carbon steel, this AbbottoKaylan knife billet sharpens easily, resists chipping, and holds a great edge..
  • 1095 spring steel is a kind of high carbon steel, which has the characteristics of heat resistance, low temperature resistance, oxidation resistance, corrosion resistance, etc..
  • The highest quality of high carbon steel is 1095, which has a carbon content of 1.03%. After heat treatment, it can reach the hardness of HRc58-60. The toughness is very good, but it is not rust resistant. Large-scale felling knives and military knives such as the American "KA-BAR" army knives during World War II used 1095 as the blade material..
Check Stock

3231514-24TRD Grip Strut 14 Gauge Galvanized Steel Safety Grating, 24\ Width x 1-1/2\ Height x 7\ Depth

  • Item - Carbon Steel Grating: Bar Grating.
Check Stock

Stanley National N180-174 Stanley Square Key Stock, 1/4 in W X 12 in L, Steel, quot quot L

  • 15N20 is a bright and acid resistant metal commonly used for forging with high carbon steels to draw out the contrast in Damascus patterned billets for knives and swords..
  • Its iron is alloyed with 0.88% carbon, 0.40% manganese, 2.0% nickel, and 0.10% phosphorus and silicon. (The number 15N6 may be written on the bar, this is the product SKU, not the nickel content).
  • Dimensions are 0.065" x 1-1/2" x 11-1/2"..
  • Layer 15N20 with high carbon steels like 1080, 1095, 5160, etc. to forge Damascus, and etch with Ferric Chloride to bring out the contrast. The nickel in 15N20 resists the acid, remaining bright..
Check Stock

GYMAX Kick Scooter Foldable 3 Wheel Kick Scooter Adjustable Height C Shaped Scooter for Kids with LED Flashing Red

  • HEAVY FRAME- We concern much not only on the appearance but also safety for kids' toys. Constructed of high-strength carbon steel and PP material, our....
  • STABLE CONSTRUCTION - Unique three-wheel scooter design makes our scooters stable and safe, ensuring better balance. Wide 6" pedal surface will offer....
  • LEARN TO BALANCE - HONEY JOY Bright-colored 3-wheel scooter is suitable for little ones to learn balance. T style handle bar with a lifting lock which....
  • C SHAPED DESIGN - Features a new curved handlebar in C shape, Our kick scooter provides more space for kids and prevents from colliding with....
  • FLASHING WHEELS With BRAKE - All the 3 qualified PU flashing wheels will get bright while sliding. With those wheels, children can enjoy the ride and....
Check Stock

Hi-Contrast 15N20 Steel Barstock for Making Carbon Damascus Knives -- 0.065' x 1-1/2' x 11-1/2'

  • 15N20 is a bright and acid resistant metal commonly used for forging with high carbon steels to draw out the contrast in Damascus patterned billets for knives and swords..
  • Its iron is alloyed with 0.88% carbon, 0.40% manganese, 2.0% nickel, and 0.10% phosphorus and silicon. (The number 15N6 may be written on the bar, this is the product SKU, not the nickel content).
  • Dimensions are 0.065" x 1-1/2" x 11-1/2"..
  • Layer 15N20 with high carbon steels like 1080, 1095, 5160, etc. to forge Damascus, and etch with Ferric Chloride to bring out the contrast. The nickel in 15N20 resists the acid, remaining bright..
Check Stock

United Abrasives- SAIT BUFFING COMPOUND KIT (QTY: 1), Multi, One Size, 41000

  • Variety pack includes brown, white, red and black bar.
  • Red bar for buffing precious metals like gold, silver, platinum, sterling and other high end metals.
  • Brown bar used for buffing aluminum, brass, copper, wood, plastics, hard rubber and painted surfaces.
  • White bar used for buffing stainless steel, carbon steel, nickel, aluminum and chromium to a high luster and shine.
Check Stock

Bobco Metals Hot Rolled Steel Base Plate A36 6\ X 6\ - 4 Holes 1/2\ Diameter - Rounded Corners - 1/4\ Thick - 8 pcs

  • 1095 blade steel specifications: 1.57 inches wide * 12 inches long * 0.16 inches thick,Weight: 0.8 lb * 3.
  • Create your own custom knife that will last a lifetime. Made from high carbon steel, this AbbottoKaylan knife billet sharpens easily, resists chipping, and holds a great edge..
  • 1095 spring steel is a kind of high carbon steel, which has the characteristics of heat resistance, low temperature resistance, oxidation resistance, corrosion resistance, etc..
  • The highest quality of high carbon steel is 1095, which has a carbon content of 1.03%. After heat treatment, it can reach the hardness of HRc58-60. The toughness is very good, but it is not rust resistant. Large-scale felling knives and military knives such as the American "KA-BAR" army knives during World War II used 1095 as the blade material..
Check Stock

Jorgensen 2-pack Medium Duty Steel Bar Clamp Set with 600 lbs Load limit, 24-inch

  • Reach: 2-1/2’’ from edge of bar to center-line of screw.
  • Bar: 1/4”x3/4” plated, round-edge, high-carbon steel.
  • Screw: 3/8’’ diameter cold-drawn steel with special, smoothly cut U.S.S. threads.
  • Swivel: 3/4’’ diameter, plated steel, ball-and socket type.
  • Sliding-Head Design - The sliding head is threaded to accommodate the screw. All adjustments are made in the moveable sliding head, making this style fast-acting, easy to open and close and suitable for “close quarters” clamping. Strong, light-weight steel bars are rust-resistant. Multiple-Disc-Clutch holds securely at any point along the bar.
  • Materials - Our clamps are proudly made using high quality materials for lasting value and great performance. Strong, lightweight steel bars are rust-resistant.
  • Feature - Rust resistant zinc plated steel bar.
  • Sliding head with multiple disc-clutch holds work securely.
  • New comfort grip handle with fast moving screw.
  • Application Occasion - Suitable for a wide range of woodworking. Steel bar clamps are used by professional cabinet makers, carpenters, woodworkers, metalworkers, and with confidence by DIY homeowners on weekend projects.
Check Stock

Performance Tool W89735 Diesel Compression Tester Kit for Large Cars, Trucks, Tractors, and Other Heavy-Duty Vehicles in Tough Organizer Case

  • CONVENIENT: Swivel end coupler allows quick and easy change-out of adapters.
  • DURABLE CONSTRUCTION: Made with tough carbon steel with a chrome plated gauge for measuring in harsh environments.
  • ACCURATE MEASUREMENTS: 0-1000 psi/0-70 bar gauge with release valve.
  • EASY TO HANDLE: 14.5-inch hose makes it easy to position as you need for any task.
  • DURABLE COVERING: The non-sparking, chemical resistant molded urethane covering is bright orange for high visibility and safety.
Check Stock

Bodyblade?? Blast Burn & Sculpt DVD

  • SPECS: Dimensions are 50” L x 29” W x 14” H.
  • GRIPS: Neutral placed grip are comfortable and elevated sleeves making lifting easier on the back.
  • COMPACT: Constructed of tubular steel, this bar takes up minimal amount of space in home gym.
  • STABILITY: Incorporated feet protect floors from weights and balances bar while loading and unloading.
  • Medium carbon steel bolts are SAE 429 Grade....
  • FULL BODY WORKOUT: This bar allows for a full body workout by engaging large muscle groups thereby building strength and fueling muscle growth.
Check Stock

12L14 Steel Bar Stock 1-1/4 in Round x 12 in Length

  • 12L14 Steel Bar Stock 1-1/4 in Round x 12 in length By LINLIN0911.
  • Shape: Round Rod Bar Material: Steel Modified Item: No Metal/Alloy Type: Carbon, Steel Country/Region of Manufacture: United States Rod Length: 12 in Rod Outside Diameter: 1-1/4 in Grade: 12L14.
Check Stock

VEVOR Bucket Tooth Bar 60'' Inside Bucket Width Tractor Bucket Teeth 9.84'' Teeth Space Tooth Bar for Loader Bucket 23TF Bolt on Tooth Bucket Enables Penetration of Compacted Soil and Other Materials

  • ...ating, which insulates the metal from the air and keeps other substances from reacting with the metal. It exempts from wearing, rusting, and corrosion, thus extending the service life..
  • Q345 Steel Alloy: The loader bucket tooth bar adopts Q345 steel material, also known as alloy steel, which has higher strength than carbon steel. Its low carbon content and low alloying element content effectively penetrate compacted soil and other materials..
  • Wide Application: The tooth bar for the tractor bucket is widely used in digging loose soil and loading sand, turf, gravel, and other working environments. They are usually fit for urban construction, mining, railway lines, roads, hydropower projects, and other buildings..
Check Stock