Categories

Best Carbon Steel Fasteners

uxcell Thin Combination Wrench with Offset 6-Point End and Angled Open End, Metric Mirror-Chrome Plated High Carbon Steel, 8mm

  • 【Standard】8mm metric sizes, 4.06-inch (103mm) total length..
  • 【Super-Thin】3mm (0.12") thickness design, which allows you to reach fasteners in tight clearance. It is especially suitable for narrow spots that traditional wrenches can’t reach..
  • 【High Carbon Steel】Made of high carbon steel for strength and durability, with polished and chrome plated finish to prevent rust and corrosion..
  • 【6-Point Box End Design】For secure fit on hex fasteners, offset by 15 degrees to leave space for fingers, prevent round-off and apply force to the flat sides of fastener heads instead of the corners..
  • 【Open End】It is angled 15 degrees, so the wrench can be flipped over to engage fasteners twice as often in narrow spaces..
Check Stock

uxcell Thin Combination Wrench with Offset 6-Point End and Angled Open End, Metric Mirror-Chrome Plated High Carbon Steel, 10mm

  • 【Standard】10mm metric sizes, 4.84-inch (123mm) total length..
  • 【Super-Thin】3mm (0.12") thickness design, which allows you to reach fasteners in tight clearance. It is especially suitable for narrow spots that traditional wrenches can’t reach..
  • 【High Carbon Steel】Made of high carbon steel for strength and durability, with polished and chrome plated finish to prevent rust and corrosion..
  • 【6-Point Box End Design】For secure fit on hex fasteners, offset by 15 degrees to leave space for fingers, prevent round-off and apply force to the flat sides of fastener heads instead of the corners..
  • 【Open End】It is angled 15 degrees, so the wrench can be flipped over to engage fasteners twice as often in narrow spaces..
Check Stock

uxcell Thin Combination Wrench with Offset 6-Point End and Angled Open End, Metric Mirror-Chrome Plated High Carbon Steel, 5mm, 2 Pcs

  • 【Standard】5mm metric sizes, 3.03-inch (77mm) total length..
  • 【Super-Thin】3mm (0.12") thickness design, which allows you to reach fasteners in tight clearance. It is especially suitable for narrow spots that traditional wrenches can’t reach..
  • 【High Carbon Steel】Made of high carbon steel for strength and durability, with polished and chrome plated finish to prevent rust and corrosion..
  • 【6-Point Box End Design】For secure fit on hex fasteners, offset by 15 degrees to leave space for fingers, prevent round-off and apply force to the flat sides of fastener heads instead of the corners..
  • 【Open End】It is angled 15 degrees, so the wrench can be flipped over to engage fasteners twice as often in narrow spaces..
Check Stock

uxcell Thin Combination Wrench with Offset 6-Point End and Angled Open End, Metric Mirror-Chrome Plated High Carbon Steel, 10mm, 2 Pcs

  • 【Standard】10mm metric sizes, 4.84-inch (123mm) total length..
  • 【Super-Thin】3mm (0.12") thickness design, which allows you to reach fasteners in tight clearance. It is especially suitable for narrow spots that traditional wrenches can’t reach..
  • 【High Carbon Steel】Made of high carbon steel for strength and durability, with polished and chrome plated finish to prevent rust and corrosion..
  • 【6-Point Box End Design】For secure fit on hex fasteners, offset by 15 degrees to leave space for fingers, prevent round-off and apply force to the flat sides of fastener heads instead of the corners..
  • 【Open End】It is angled 15 degrees, so the wrench can be flipped over to engage fasteners twice as often in narrow spaces..
Check Stock

(400 pcs) 1/8\-27 X 5/16\

  • Superior quality parts by Holo-Krome, made in the U.S.A..
  • Threaded pipe plugs are designed to close the ends of internally threaded pipes and fittings..
  • An internal hex socket drive is also known as an Allen drive..
  • Alloy steel fasteners are significantly stronger than standard low carbon steel fasteners..
Check Stock

(100 pcs) 1/4\

  • Threaded pipe plugs are designed to close the ends of internally threaded pipes and fittings..
  • An internal hex socket drive is also known as an Allen drive..
  • Alloy steel fasteners are significantly stronger than standard low carbon steel fasteners..
Check Stock

(300 pcs) 1/2\ X 3/4\ (3/8\-16 Thread), Shoulder Screws, Hex Socket Drive, Alloy Steel

  • Shoulder screws are also known as shoulder bolts or stripper bolts..
  • An internal hex socket drive is also known as an Allen drive..
  • The shoulder acts as a shaft or dowel for rotating items such as bearings or bushings..
  • Alloy steel fasteners are significantly stronger than standard low carbon steel fasteners..
Check Stock

Brewing Trouble: A Paranormal Women’s Fiction Novel (Crow’s Feet Coven Book 2)

  • 【HIGH QUALITY MATERIAL】The material of the crowfoot wrench is carbon steel, heat-treated, chrome-plated surface. The material of the ratchet handle is carbon steel, heat-treated, knurled, electroplated, round head handle..
  • 【SPECIFICATION】3/8” Square drive open end crows foot wrenches – Sizes included (SAE/Standard): 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 ”..
  • 【EXTEND YOUR REACH】These handy problem solvers give you more options when you are trying to get at fasteners in tight awkward spaces..
  • 【EASY STORAGE】Mounted on a convenient storage rail. Each wrench size is permanently stamped for simple identification..
  • 【WIDE APPLICATION】Crow’s feet wrench adapters speed up installations & removals fitting perfectly on any 3/8” drive ratchet extension or torque wrench reaching inaccessible fasteners that sockets can’t get to – Great for car automotive & truck work in tight engine/radiator areas like o2 sensors or for underneath sink/toilet work like faucet spray hoses..
Check Stock

HolsterSmith Sheath and Holster Making - Thermoform Basic Combo Kit

  • CHICAGO SCREWS – The best choice when it comes to DIY Kydex and Leather Holsters, Knife Sheaths, Belt Clips, or any other piece of tactical gear.....
  • EASY TO TIGHTEN – The open slotted fasteners are ideal because they allow for a tighter and more secure connection than non-slotted fasteners.
  • STRONG & DURABLE – Each piece of hardware is made of high carbon steel and coated with a high tech black thermochemical treating to harden it and....
  • DIMENSIONS – Phillips Screw Heads have a 3/8” outside diameter and 1/4" long threaded section with an 8-32 thread, Slotted Post Fasteners have a....
  • 100% SATISFACTION GUARANTEED – We take great pride in our products and make sure that the highest quality standards are met by sending each product....
Check Stock

Single Tab Weld Nut with Target - Spot Weld Nuts #8-32 - Weld Nuts/Spot/Offset Hole - Low Carbon Plain Steel (50)

  • C1010 High-Welding Quality, Low Carbon Steel, C1010 High-Welding Quality, Low Carbon Steel.
  • Compare to Buckeye Fasteners SKU: ND 3324.
  • Compare to Paulin Industries Part #: 08-3324.
Check Stock

Knife Blanks DM2719 7 Overall Damascus Drop Point Hunter Knife Blade

  • Carbon Steel Knive Blade Blank for making knifes. Full-Tang Blade Blanks with screws.
  • Knife Making Kit: Full Tang Blank Knife and 3 screws. DIY knife set. Durable and robust high carbon steel 1066 knife blank.
  • Tempered Hardened to 57-59 HRC True Scandi grind. Blade has Jimping on the spine.
  • Knifemaker kit includes 3 screws(Knife Handle Fasteners M2.5 Inner Hexagon Screw).
  • Dimensions: Total length 8 1/2 inches, Blade length 4 inches, Blade thickness 0.11 inches.
Check Stock

IRWIN Bolt Extractor Set for Lug Nuts Impact Rated 1859146

  • IMPACT performance series bits are designed specifically for impact drivers and the higher torque they produce..
  • Reverse spiral flutes grip harder as resistance increases for maximum grip power. Deep Well fits over studs to remove even recessed broken fasteners..
  • Constructed of premium high-carbon steel for durability and extended drilling life. Black oxide finish resists corrosion and increases life of....
  • Universal lobular design fits all types of fasteners. Square drive fits impact wrenches, or drills and impact drivers when used with included adapter..
Check Stock

DURATECH Super-Thin Open End Wrench Set, SAE, 8-Piece, Including 1/4\

  • 【Quality Wrenches】Thin, but strong. Made of premium carbon steel with mirror polish finish. Chrome plated for rust-resistance, heat treated for maximum strength and long lifespan. High quality wrench set exceeds ANSI standard..
  • 【1/8in Super-Thin】1/8 inch thin wrenches which let you reach fasteners in tight clearance. Useful especially in narrow spots where traditional wrenches can’t reach. Precisely machined for a perfect fit on all fasteners, giving you maximum torque without slippage..
  • 【Less to Carry】Two sizes per wrench provides more options with less to carry. Wrench sizes are stamped twice on both sides of handle for easier size identification: 1/4"x9/32.
Check Stock