Categories

Best Carbon Steel Left Hand Die

YOUSUNLONG Nakiri 6.5 inch Usuba Japanese Hammered Damascus Natural Leadwood Handle with Leather Sheath

  • ...) textured Damascus blade. They feature a hand sharpened and hand honed Damascus stainless steel blade core that is clad on both sides by a 33-layer Damascus stainless steel (50/50 symmetrically ground double beveled edge)..
  • The length of blade is 6.5 inch,the thickness is about 2.5mm.The use of Japan 67 layer HIGH CARBON CONTENT steel core Damascus steel made of high quality Chef's special cutting knife, HRC (hardness) 60±, The knife are suitable to cutting any meat,fish,vegetables and fruits,ect.But do not chop bone..
  • Handle the 430 double elbow is integrated die casting,and the outer layer is covered with environmentally friendly and high-grade black and ebony，The handle is comfortable, durable and hard, reducing operator fatigue..
  • Knife surface convex hull with anti-stick effect,The professional Nakiri has a sharp blade and a 15° blade. It has high hardness and wear resistance.In the process of use, your left and right hand can be used,meantime you can make accurate cutting and even slice, which make it easier to use..
  • Damascus machete is not only sharp, but the decoration is also world class,This is a great gift for your loved ones or parents in the cooking of interesting dishesg and enjoy the food.This is an exquisitely wrapped gift box for all....
Check Stock

YOUSUNLONG Nakiri Knife 9 inch Pro Usuba Japanese Damascus Hammered Steel - Natural Walnut Handle With Leather

  • ...us blade. They feature a hand sharpened and hand honed Damascus stainless steel blade core that is clad on both sides by a 33-layer Damascus stainless steel (50/50 symmetrically ground double beveled edge)..
  • 【High Quality】The length of blade is 9 inch , the thickness is about 2.5mm.The use of Japan 67 layer HIGH CARBON CONTENT steel core Damascus steel made of high quality Chef's special cutting knife, HRC (hardness) 60±, The knife are suitable to cutting any meat,fish,vegetables and fruits,ect. But do not chop bone..
  • 【Comfortable and Durable】Handle the 430 double Walnut is integrated die casting,and the outer layer is covered with environmentally friendly and high-grade brown and Walnut,The handle is comfortable, durable and hard, reducing operator fatigue..
  • 【Anti-Stick】Knife surface convex hull with anti-stick effect,The professional chef's knife has a sharp blade and a 15° blade. It has high hardness and wear resistance.In the process of use, your left and right hand can be used,meantime you can make accurate cutting and even slice, which make it easier to use..
  • 【Perfect Gift】Damascus machete is not only sharp, but the decoration is also world class,This is a great gift for your loved ones or parents in the cooking of interesting dis....
Check Stock

Muzerdo 131PCS Sae and Metric Coated Bearing Steel Tap and Die Rethreading Kit

  • ...ded in the set are handles for turning. The collection also consists of screw extractors and charts to determine the correct drill and taps to match the thread size and pitch. Some sets may contain twist-lock guides, coarse and fine taps, and other tools at a higher cost..
  • Instead of other kits which are made of low carbon steel, our kit are made of *** bearing steel*** which are more stronger, good abrasion performance. An overall chromium coating improves the corrosion resistance of the generally used through-hardening bearing steel. These cutting materials are suitable for threading steel, cast steel, cast iron, non-ferrous metals, plastics, softwood, and hardwood..
  • Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.
Check Stock

uxcell Tap and Die and Drill Bit Set M14 x 2 Left Hand Thread Milling Tap and Round Die 12mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M14 x 2 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 12mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

Cle-Line C66811 Quick-Set Collet Assembly with 2-Piece Die

  • Quick-set two piece die system consists of these parts, die, cap, guide and collet.
  • Unified and American National thread form standard.
Check Stock

Cle-Line C66789 Quick-Set Collet Assembly with 2-Piece Die

  • Quick-set two piece die system consists of these parts, die, cap, guide and collet.
  • Unified and American National thread form standard.
Check Stock

Cle-Line C66807 Quick-Set Collet Assembly with 2-Piece Die

  • Quick-set two piece die system consists of these parts, die, cap, guide and collet.
  • Unified and American National thread form standard.
Check Stock

Cle-Line C66786 Quick-Set Collet Assembly with 2-Piece Die

  • Quick-set two piece die system consists of these parts, die, cap, guide and collet.
  • Unified and American National thread form standard.
Check Stock

Cle-Line C66785 Quick-Set Collet Assembly with 2-Piece Die

  • Quick-set two piece die system consists of these parts, die, cap, guide and collet.
  • Unified and American National thread form standard.
Check Stock

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

Yakamoz 10pcs Micro Taps Bits Mini Machine Screw Drill Tap Set Metric Thread Screws Plug Bit Small Tapping Bits Tool

  • This tap and die set is made of made of high carbon chromium bearing steel which are more stronger, An overall chromium coating improves the corrosion resistance of the generally used through-hardening bearing steel..
  • 86 piece tungsten steel set comes in an organized, rugged plastic storage case.
  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman.
  • Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread.
  • Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.
Check Stock

Kuhn Rikon Original Swiss Peeler, Polka Dot, 4-Inch, Green

  • Handy peelers, perfect for any household.
  • Super-sharp carbon steel blade cuts better that most other peelers and stays sharp.
  • Ergonomic design works in right or left hand.
  • Carbon steel horizontal Y blade with convenient potato eye remover.
Check Stock

Kuhn Rikon Original Swiss Peeler Polka Dot 4-Inch Blue

  • Handy peelers, perfect for any household.
  • Super-sharp carbon steel blade cuts better that most other peelers and stays sharp.
  • Ergonomic design works in right or left hand.
  • Carbon steel horizontal Y blade with convenient potato eye remover.
Check Stock