Categories

Best Carbon Steel Pipe Elbows

TIRDITY 3/4\ Pipe Fittings - 24 Pack 3/4 Inch Black Floor Flange Elbow Tee Combo | Malleable Cast Iron Vintage Furniture Grade Threaded Pipes for DIY Industrial Shelves, Pipe Shelving, Steampunk Decor

  • ...orative black pipe fittings are the way to go. Threaded pipe fittings are built to fit your household with an industrial, rustic style. Our black steel pipe fittings will definitely satisfy you..
  • 【 EASY TO INSTALL 】These metal cast pipe fittings are threaded, just screw the threaded rods or pipes to the tees and elbows and they will hold forever. No screws needed to install steampunk pipe fittings. Easy to install, no DIY difficulties to connect Pipe furniture fittings. You will love black iron pipe connectors..
  • 【 MATERIAL OF RAW IRON 】Since threaded metal pipes are unprocessed cast iron parts, we strongly recommend you to clean and seal each part of black steel pipe coupling to ensure they remain rust-free. Our steel pipe fittings are coated with a layer of light black grease so the product may seem dirty upon receipt but still new to use when you clean up the grease..
  • 【 100% NEW PRODUCT 】Every pack of decorative pipe flange fitting that we sell is definitely brand new. Our threaded pipe flange has high quality, steady strength, heavy duty, flexibility and machinability to ensure pleasing appearance and satisfying longevity. If you have any questions about black steel pipe floor flanges, you can contact us. We will respond to you within 24 ....
Check Stock

Carbon Fiber Exhaust Tip 3 Inlet 4 Outlet Red Exhaust Tip 3 inch Car Tailpipe Muffler Tip for 3in Exhaust Pipe

  • 【Universal fitment】The muffler exhaust end tip fits for most vehicles with a pipe diameter of 3 inch.
  • 【High quality steel】 The 3 inch exhaust tip is designed with durable SUS304 stainless steel . Protect your original pipe from sun and rain. Avoid....
  • 【3K Carbon Fiber】 The shell of the 3 inlet carbon fiber exhaust tip is made with carbon fiber material, smooth and shiny, and resistant to high....
  • 【Easy installation】 No welding and drilling required. just put the carbon fiber tail pipe on the car exhaust pipe and tighten the fixing device..
  • 【Warranty】 Tempsnow provide 30-Days warranty. If you have any problems with it or questions, please contact us and we will respond in time. We're....
Check Stock

uxcell Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44.
  • the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads..
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped..
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications..
  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock

Drill America - POUCSNPT5 5 Piece NPT Pipe Tap Set (1/8\

  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.
Check Stock

Stainless 2.5" 90 Degree Mandrel Bend Elbow - 14GA/.078" Wall - 1.5" Leg - SS304 Stainless Steel Exhaust Elbow Piping for Car Exhaust Pipe Modified, Stair Handrail, etc - KOTVTM

  • 【Material】: SS304 Stainless Steel 90° Exhaust Pipe Elbow, Stainless steel elbows that are resistant to high temperatures, oxidation, and rust (can be welded to 2.5 inches outside diameter pipe) for car exhaust pipe modified, stair handrail, etc.
  • 【OD】: 2.5"/63mm, The outer diameter of the elbow is 2.5". Height（L): 5.51"/140mm.
  • 【Quantity】: Single Elbow. 100% brand new.
Check Stock

WGLAWL Durable Stainless Steel Tent Stove Chimney Pipe Kit Single Wall, Chimney Spark Arrestor, Fireplace Chimney Rain Caps,2.36 Inch/6cm Diameter Chimney Pipes,Camping Stove Accessories

  • MULTI-PURPOSE: This stainless steel stove flue pipe is specially designed for outdoor camping wood stoves with good heat and abrasion resistance. The flexible combination of straight pipes and elbows allows the stove to be used in more places, such as hot tents, hammock tents and RVs..
  • PRODUCT MATERIAL: Tent Stove Chimney Pipe is made of sturdy stainless steel. The stainless steel material has the characteristics of corrosion resistance, which determines the longer service life of stainless steel products. In addition, stainless steel has good high temperature resistance and can keep the product stable at high temperatures..
  • THICKEN THE CHIMNEY TUBE: the thickness of the chimney tube is 0.5mm. Compared with some easily deformable chimney pipes on the market, we use thicker pipes. The material is sturdy and not easy to deform by hand, which can ensure a longer life of the furnace tube..
  • CHIMNEY SIZE: The diameter of the chimney pipe of the camping stove is 6cm/2.36 in. Please confirm the diameter of the chimney pipe of the camping stove before placing an order..
Check Stock

Drill America - POU3/8NPTW/DRILL 3/8\ Carbon Steel NPT Pipe Tap and 37/64\ High Speed Steel Drill Bit Set, POU Series

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or Jam pipe threads.
  • Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
  • 3/8" carbon steel NPT tap and 37/64" HSS drill bit with 1/2" Shank.
  • Set contains matching NPT pipe tap and high speed steel drill bit.
Check Stock

KOTVTM 2" Stainless Steel Elbow 45° Mandrel Bend Elbow - 1.5D/3" CLR Loose Radius - 16GA/.065" Wall - 2" Legs - SS304 Stainless Elbow for Car Modified Exhaust Elbow Pipe, Pipeline engineering, etc

  • 【Material】: SS304 Stainless Steel 45° Exhaust Pipe Elbow, Stainless steel elbows that are resistant to high temperatures, oxidation, and rust (can be welded to 2 inches outside diameter pipe) for car exhaust pipe modified, stair handrail, Pipeline engineering, etc.
  • 【Quantity】: Single Elbow. 100% brand new.
Check Stock

SharkBite UC256LFA10 3/4

  • ELBOWS: SharkBite fitting 3/4 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems..
  • AFFORDABLE: Low cost solution to connect PEX Pipe Tubing.
  • COMPATABLE PRODUCT: Use with SharkBite PEX Clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings. The SharkBite connection system is perfect for your next commercial or homeowner plumbing project..
  • LEAD FREE: All SharkBite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant.
  • QUALITY: Only SharkBites quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
Check Stock

Omninmo NPT Pipe Tap Set Thread Forming Taps High Speed Steel Drill Bits Thread Tap Attack Pipe Plate Hand Tapping for Cleaning or Re-thread Damaged or Jam Pipe Threads Size G3/4 55 Degrees

  • High Strength Material: Omninmo pipe tap set is different from the traditional carbon steel material. Our pipe taps is made of composite steel material, which is more durable and Higher hardness..
  • Professional Cutting Tools: Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
  • Convenient and Durable: Uncoated tools feature just the base substrate without any additional treatment or coatings,Carbon steel pipe taps are designed to clean or rethread to damage or block pipe threads,cuts internal threads in pipes..
  • Universal size: Nominal size of the tap is that of the pipe fitting being tapped. Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). The size is 3/4.Omninmo NPT Thread Forming Taps is ideal for pipe fittings..
  • Product Guarantee: If you have any questions, Please contact us in time, We will reply to you immediately to solve your problem..
Check Stock

Zurn GT2700-10-2NH - Steel Grease Trap, 10 GPM 2\ with Flow Control

  • ...e interceptor, whose flow rate is about 35 GPM (132.49 LPM). The interior space is divided into three different filter areas. The solid waste and grease will be stopped by the filter baffle firstly, and then the oil and filtered water will be discharged from the outlet valve and drainage outlet successively..
  • Coated Carbon Steel: Our 70 LB commercial grease trap is made of heavy-duty carbon steel, around 0.07 in (1.8 mm) in thickness, featuring durability and sturdiness. There is a rust & corrosion-proof coating on its exterior surface, which is easy to clean and hard to deform..
  • Reliable Sealing Effect: As a piece of rugged equipment for collecting and filtering the waste in the kitchen, this commercial grease interceptor spotlights the excellent sealing effect. The lid can be tightly fixed with a screw. The cushion layer is equipped for increasing friction and enhancing airtightness. Besides, a sealing ring and PTFE tape are also included in the package..
  • Ease Of Connecting：You can connect our commercial grease trap to your kitchen sink conveniently. Just link the grease inlet pipe to the higher inlet hole and the water outlet pipe to the lower outlet hole, then it will work properly. A piece of connecting pipe is provided, with which you can place ....
Check Stock

PVC Pipe Cutter Exhaust Pipe Cutter Tailpipe Cutter, Universal Chain Pipe Cutter Exhaust Pipe Cut Off Tool Copper Pipe Cutter Carbon Steel Cutting Pliers w/Non-Slip Handle

  • ... the pipe, hand rotate chain around pipe until pipe is cut. Tips: Lubricating the exhaust cutter cutting wheels before use will give a more smooth cutting operation and extends the life of the item.
  • 【Wide Application】The maximum cutting size is 0.09inches(2.5mm). This Pipe Cutter is suitable for cutting most low-carbon steel pipes, copper pipes and plastic (PVC, CPVC, PP, PEX, PE, rubber) pipes.
  • 【Comfortable Grip】14.5 inch (37cm) exhaust pipe cutting tool has rubberized handles.
  • Cushioned for comfort and non-slip security.
  • 【Withsatnd the Test of Time】This quality metal pipe cutter's cutting wheels were made of high quality 45# carbon steel, which won’t easily get dull. The head of the exhaust cutting tool won’t bend from during rotation. Sharp, Durable and Long life service time.
Check Stock

Scotte Stainless Steel Reamer Tool 6 Blade Tobacco Pipe Carbon Scraper

  • Tobacco pipe reamer tool,carbon dioxide cleaner/carbon scraper.
  • Adopt import high quality stainless steel, very upscale atmosphere, show aristocratic temperament.
  • Bit pass needle design, can clean pipe, can change part of flue, very practical.
  • Can be fine-tuned to control the thickness of retained carbon pie.
  • Thicken design, material, strong and durable, beautiful and generous, ideal choice.
Check Stock