Categories

Best Carbon Steel Pipe Fitting

Drill America - DWT64119 1/2\-14 NPS High Speed Steel 4 Flute Straight Pipe Tap, DWT Series

  • Nominal size is that of the pipe fitting being tapped.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Ideal for cutting internal threads in pipe fittings and whenever an extremely tight fit is required.
Check Stock

5 Piece NPT Thread Forming Taps Pipe Taps Set High-speed Steel Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads Size 1/8 1/4 3/8 1/2 3/4 in Storage Box

  • Durable materials: Upgrade Your Pipe Threading game with Our Composite Steel Pipe Taps Set. Ditch your old, carbon steel pipe taps and upgrade to our composite steel (GCR15) pipe taps set. With a higher hardness level than traditional carbon steel, our pipe taps are more durable and long-lasting..
  • Tool Storage Box: The 5-piece set includes all the sizes you need for clean and re-threading damaged or jam pipe threads, and the Storage Box makes for easy organization and transport. Includes size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt.
  • Versatile set suitable for both personal and professional use. Clean and Re-Thread Damaged or Jam Pipe Threads with Ease - Ideal for Pipe Fittings, DIYers, handymen, and professionals who need to repair damaged pipe threads. Revive Damaged Pipe Threads with Precision Using Our 5-Piece High-Speed Steel NPT Pipe Taps Set..
  • NPT and BSP Available - Perfect for Cuts Internal Threads in Pipes. Durable and Harder Than Carbon Steel - Our GCR15 Material Makes All the Difference. With a round shank and square end, our pipe taps are well-suited for most applications in shallow cuts. Upgrade your pipe threading game today with our composite steel pipe taps set..
  • Uncoated Tools for Versatile Use: Unco....
Check Stock

Carbon Fiber Exhaust Tip 3 Inch Inlet 4 Inch Outlet Burnt Blue 3 Inch Exhaust Tips Muffler Tip

  • 【Purchase Guide】 Remove the exhaust tip from the original car and make sure the outer diameter of the exhaust pipe is 3 inch(77mm)..
  • 【Universal fitment】The muffler exhaust end tip fits for most vehicles with a pipe diameter of 3.0 inch..
  • 【High quality steel】 The 3 inch exhaust tip is designed with durable SUS304 stainless steel . Protect your original pipe from sun and rain. Avoid rusting and deformation..
  • 【3K Carbon Fiber】 The shell of the 3 inlet carbon fiber exhaust tip is made with carbon fiber material, smooth and shiny, and resistant to high temperatures.Also can decorate the car, increase the beauty of the car, enhance the driving experience..
  • 【Easy installation】 No welding and drilling required. just put the carbon fiber tail pipe on the car exhaust pipe and tighten the fixing device..
Check Stock

PATIKIL Hose Barb Fitting Elbow 8mm Barbed M14x1.5 Male Thread 2 Pack Carbon Steel Pipe Adapters Connectors for Air Water Fuel Oil Gold

  • Overall Size: 46 x 35mm / 1.81 x 1.38 inch (L*W).
  • Advantage: Carbon steel material features high strength, high pressure, and high-temperature resistance. Leakproof comes with 2 washers for good sealing performance.
  • Instruction: The thread-to-barb pipe fitting is commonly used to connect pipes such as air, gas, water, oil, and fuel in a quick and simple way..
  • Application: The thread-to-barb pipe fitting is a coupling for joining 2 diameter sizes pipes in different directions. Can be used with PE, nylon and PU tubing in industrial environments, for many fluids.
  • Notice: Please confirm the correct size before ordering. You can dip the end of the tubing/hose in hot water for a while for push-on installation easily.
Check Stock

Spanner Nut Wrench for Locknut Removal and Tighten for pipe fitting and collet nut

  • Fits 1 1/4” OD Castle Nuts and Commercial Castle nuts..
  • Material: Heat Treated High Carbon Steel / Case Hardened and Black Powder coated.
  • Commonly used for plumbing, pipe fitting, fishing rods, safes, automotive suspension, and hitch.
  • Made in the USA / 100% Customer Satisfaction Guaranteed.
Check Stock

Carbon Fiber Exhaust Tip 3 Inlet 4 Outlet Red Exhaust Tip 3 inch Car Tailpipe Muffler Tip for 3in Exhaust Pipe

  • 【Universal fitment】The muffler exhaust end tip fits for most vehicles with a pipe diameter of 3 inch.
  • 【High quality steel】 The 3 inch exhaust tip is designed with durable SUS304 stainless steel . Protect your original pipe from sun and rain. Avoid....
  • 【3K Carbon Fiber】 The shell of the 3 inlet carbon fiber exhaust tip is made with carbon fiber material, smooth and shiny, and resistant to high....
  • 【Easy installation】 No welding and drilling required. just put the carbon fiber tail pipe on the car exhaust pipe and tighten the fixing device..
  • 【Warranty】 Tempsnow provide 30-Days warranty. If you have any problems with it or questions, please contact us and we will respond in time. We're....
Check Stock

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

  • ...or the repair of rusted, broken and slippery threads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
  • The thread is standard, clear, and the cutting resistance is smaller than that of ordinary taps, which is the best choice for through-hole processing. Standard tooth spacing, no bad teeth, no burrs, making repair and maintenance a breeze. Slotted in the front section, chip removal in the upper phase, easy to repair, through holes and blind holes are available..
  • Product Packaging Upgrade: The set comes with a convenient red storage box to keep the taps organized and easily accessible. The box also helps protect the taps from damage during transportation and storage. These thread forming taps are perf....
Check Stock

Spanner Nut Wrench for Locknut Wrench for Nut Removal and Tighten for pipe fitting and collet nut.

  • Fits all 1 1/4” OD Castle Nuts and Commercial Castle nuts..
  • Material: Heat Treated High Carbon Steel / Case Hardened and Black Oxide coated.
  • Commonly used for plumbing, pipe fitting, fishing rods, safes, automotive suspension, hitch.
  • Made in the USA / 100% Customer Satisfaction Guaranteed.
Check Stock

GIANNEER Disconnect Tongs Tool Push to Connect Fittings Removal Tools Disconnect Clamp Plumbing Tool for 1/2”, 3/4”, 1” Brass Pipe Fittings

  • 1.Versatile Tool: This GIANNEER disconnecting tongs includes 3 sizes of interchangeable teeth(1/2”, 3/4”, 1”). It can remove the push-to-connect pipe fittings, such as copper and pipe in any combination easily and quickly. No extra glue, tape, soldering, pliers required. The disconnect tongs can be reused..
  • 2.Unique Design: The new design of disconnect line tool can reach the pipe perfectly. It brings much convenience to your work..
  • 3.Interchangeable Teeth: Press the button at the top of the removal tool, then insert the replacement piece to complete the switch..
  • 4.How to Use: To use the disconnect tool, simply slide the tongs over the fitting and the pipe, align the clamp with fitting and pipe. Then squeeze the tongs to press the fitting's release collar to remove the pipe from the fitting effortless..
  • 5.Superior Material: This disconnect tongs tool is made of S50C steel, and the surface is oxidized and blackened, which is not easy to rust. In addition, the tongs has been heat treated as a whole, with high hardness. It’s suitable for various operating environment....
Check Stock

Drill America - POUCSNPT5 5 Piece NPT Pipe Tap Set (1/8\

  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.
Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

Jeemiter Castle Nut Removal Wrench for Nut Removal and Tighten for pipe fitting and collet nut

  • Material: Heat Treated High Carbon Steel / Case Hardened and Black Powder coated.
  • Fits all commercial and standard Castle nuts with a 1 1/4” OD and plumbing..
  • Commonly used for plumbing, pipe fitting, fishing rods, safes, automotive suspension, and hitch.
  • Very easy to hang on you with the O ring end, smart and handy to use with a circle edge bar.
Check Stock

iCrimp Push-to-Connect,Push-fit Disconnect Tool for Brass-Push Fittings Removing,Multi-size Combination 1/2 ,3/4 ,1 -CRQ01

  • 「VERSATILE TOOL」With one tool allows 1/2”,3/4”,1” Push-to-Connect to be disconnected from the copper, CPVC, or PEX pipe, no extra....
  • 「REMOVES IN SECONDS」Simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly..
  • 「DURABILITY」Constructed of high-quality carbon steel with corrosion resistance ensures reliable functionality and long service life..
  • 「ERGONOMIC DESIGN」Wide handle with dipped grips reduce fatigue and one-handed operation design to allow your free hand the ability to assist in....
  • 「VERSATILITY」It's compatible with regular Push-fit/Push-to-Connect brass fittings..
Check Stock