Categories

Best Carbon Steel Pressure Pipe

CATUDIY Intake Pipe Valve Cleaner Machine for Car Engine Fuel System Cleaners, Fuel Cleaning Tool Automotive Engine Carbon Deposit Cleaner 110V Valvetronic System Walnut Powder Sand Carbon Deposition

  • ... loop. Walnut powder will impact the carbon deposits on the inner wall of the intake pipe. After thousands of impacts, carbon deposits will be clear thoroughly.
  • Safe & Efficient -- As an eco-friendly pure natural polish material, walnut sand has advantages of hardness, pressure resistance and wear resistance. It can clean the intake pipe and backside of the intake valve thoroughly without pipes damage and corrosion different from a pollution-caused chemical intake valve cleaner.
  • Integrated Design -- Walnut sand can be sprayed and recycled simultaneously. Built-in dust filter can separate the recovered walnut sand grit from carbon deposits for recycling. Walnut powder residual in intake pipe will go to ashes at high temperature after engine cranking to avoid damaging automotive exhaust systems & parts.
  • Easy to Use -- Using this engine carbon deposit cleaner after turning off the engine. Turn the crankshaft to close the intake valve, clean one intake tube at a time, and 6 cylinder engine should be cleaned one by one (6 times) and so on. Note: (Package not included walnut powder and high-pressure air pump).
Check Stock

Drill America DWTPT1/4-1-1/4SET 6 Piece NPT Pipe Tap Set in Wooden Case (1/4\

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4.
Check Stock

Tailpipe Cutter 3/4 to 3 Inch, Carbon Steel Chain Exhaust Pipe Cutter Tool, Tube Cutting Pliers for Cutting Exhaust Pipe Copper Pipes

  • Easy Cutting: Use our exhaust tube chain cutter to quickly achieve cutting exhaust pipes, the cutting diameter of the product ranges from 3/4" to 3" (19-76mm), and can cut thin wall pipes up to 2.5mm thick.
  • Unique Design: The tail pipe cutter adopts an adjustable chain lock design, the chain length is 30cm. The riveting process makes our tube cutting pliers not easy to loosen and deform. Fine-tuning screws are designed at the rear of the product to ensure that the cutter is in close contact with the pipe.
  • High-Quality Material: The exhaust tail pipe cutter is made of high-hardness carbon steel material, which is durable, corrosion-resistant, and effectively prolongs the use time of the product. Comfortable coated handle on the surface, safe and non-slip, relieve your hand pressure.
  • Wide Range of Applications: Our tailpipe cutter are very suitable for cutting exhaust pipes, plastic pipes, low carbon steel pipes, copper pipes, etc. They can be used without electricity. They are very suitable for you to use outdoors and help you solve the difficult problem of cutting pipes outdoors.
  • Easy to Carry: The exhaust cut off tool is moderate in size, can enter a narrow space for work, and is easy to carry and store, greatly saving your storage space.
Check Stock

Carbon Fiber Exhaust Tip 3 Inlet 4 Outlet Red Exhaust Tip 3 inch Car Tailpipe Muffler Tip for 3in Exhaust Pipe

  • 【Universal fitment】The muffler exhaust end tip fits for most vehicles with a pipe diameter of 3 inch.
  • 【High quality steel】 The 3 inch exhaust tip is designed with durable SUS304 stainless steel . Protect your original pipe from sun and rain. Avoid....
  • 【3K Carbon Fiber】 The shell of the 3 inlet carbon fiber exhaust tip is made with carbon fiber material, smooth and shiny, and resistant to high....
  • 【Easy installation】 No welding and drilling required. just put the carbon fiber tail pipe on the car exhaust pipe and tighten the fixing device..
  • 【Warranty】 Tempsnow provide 30-Days warranty. If you have any problems with it or questions, please contact us and we will respond in time. We're....
Check Stock

Hose Clamp TJBC 20 Pieces High-carbon Steel Adjustable 0.59-0.94 inch Range Worm Gear Hose Clamp Fuel Line Clamp for Plumbing Automotive And Mechanical Applications Silver 15-24mm

  • ...justed in size according to the diameter of the pipe. The hose clamp has good flexibility and can be installed and removed at any time. The clamp range represents the minimum and maximum dimensions that can be adjusted. The thickness of the steel belt and gear will not penetrate the steel belt. It can lock the high-pressure pipeline for a long time without sliding and deforming. The torque can reach 10-12KG..
  • ★ [Save time and money:] These stainless steel hose clamps can be installed on the joint of the hose pipe joint to prevent liquid leakage, thereby saving expensive repair time and money..
  • ★[Function and Use:] These clamps are firmly locked and are widely used to fix hoses, pipes, cables, pipes, fuel pipes, etc. It is very suitable for automobiles, industries, ships, shields, households, etc..
Check Stock

Hose Clamp TJBC 8 Pieces High-carbon Steel Adjustable 0.52-0.8 inch Range Worm Gear Hose Clamp Fuel Line Clamp for Plumbing Automotive And Mechanical Application Blue BTBC13-20

  • ...justed in size according to the diameter of the pipe. The hose clamp has good flexibility and can be installed and removed at any time. The clamp range represents the minimum and maximum dimensions that can be adjusted. The thickness of the steel belt and gear will not penetrate the steel belt. It can lock the high-pressure pipeline for a long time without sliding and deforming. The torque can reach 22-26lb..
  • ★ [Save time and money:] These stainless steel hose clamps can be installed on the joint of the hose pipe joint to prevent liquid leakage, thereby saving expensive repair time and money..
  • ★[Function and Use:] These clamps are firmly locked and are widely used to fix hoses, pipes, cables, pipes, fuel pipes, etc. It is very suitable for automobiles, industries, ships, shields, households, etc..
Check Stock

uxcell Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44.
  • the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads..
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped..
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications..
  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock

Drill America - POUCSNPT5 5 Piece NPT Pipe Tap Set (1/8\

  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.
Check Stock

Huntingdoor Archery Arrow Cutter Mini Cut Off Saw Trimmer Tubing Pipe Cutting Tool Portable Handheld Diameter of 3-16mm Pipe Cutter for Carbon Arrows

  • Huntingdoor arrow acutter,perfect and essential tool for cutting carbon and fiberglass arrows..
  • Multi Tool you can also can be used as a small pipe cutter 3 -16 mm pipe cutter cutting tools for copper, brass, aluminium and thin-walled steel pipes..
  • Strong and lightweight: mini tube cutter is small but strong, lightweight slide and wheel housing, and large knurled feed screw knob give easy control of cutting pressure for clean cuts..
  • Mini design for carrying conveniently,industrial grade twist knob durable. Easy pressure adjustment by rolling knob, loosen the knob by sliding knob..
  • This is a must have tool for all beginner ,archer and handy men,helps you to cut the arrow shaft efficiently and quickly, according to your needs to cut the appropriate length..
Check Stock

Drill America - POU3/8NPTW/DRILL 3/8\ Carbon Steel NPT Pipe Tap and 37/64\ High Speed Steel Drill Bit Set, POU Series

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or Jam pipe threads.
  • Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
  • 3/8" carbon steel NPT tap and 37/64" HSS drill bit with 1/2" Shank.
  • Set contains matching NPT pipe tap and high speed steel drill bit.
Check Stock

UVIPC Extra Tall 40.55\ Baby Gate Extra Wide Pressure Mounted Walk Through Child Kids Gate Black Pet Puppy Gates

  • 【Extra Tall gate】40.55 inch Extra Tall Safety Baby Gate Pressure Mounted 29-85"Toddler safety gate for stairs, doorways and Hallways to stop babies,child or pets climb over. Tips: please measure the opening size before purchasing ensure proper fit..
  • 【Double Lock System】 The baby gate walk through handle design makes it easy for parents to open，simply press the button, lift up the black wide doorways baby dog pet safety gate to open the door by grown-ups with one hand. But it is tough for children. Ultra-secure, a double-locking option in the handle design to ensure the extra wide pressure mounted baby gate is securely installed for optimal security..
  • 【High Quality&Superload】Unique design and exquisite manufacturing: smooth surface, ergonomic design, gravity rebound, seamless welding..
  • 【Durable Construction 】Steel Designed dog gate can defend against up to 100-pound impacts by your pets. No worry about the dog gate being pushed down and hurting your children. Great dog gate for your doorways and stairs..
  • 【Multi Use Design】Black tall metal dog gate is made of thick double carbon steel pipe,0.047"thick outer frame steel + 0.47" diameter thick reinforced round pipe,make a safe protective baby gate. Using this extra wide dog gate for the....
Check Stock

WAOWAO Extra Wide Baby Gate Easy Walk Thru Pressure Mount Auto Close Metal Child Dog Pet Safety Stairs,Doorways,Kitchen 24.02-81.54inch(Black,53.97\-57.84\)

  • 【180 ° Two-way Automatic】Our walk through baby gate has a 180 ° two-way opening design, which allows you to open in both directions for easy entry and exit.And pressure mounted baby gate will closes automatically when handle released, open from both sides. You can open and close this large baby gates with one hand for easy passage..
  • 【Durable and Safety】Black metal long baby gate is made of thick double carbon steel pipe,0.047"thick outer frame steel + 0.47" diameter thick reinforced round pipe,make a safe protective baby gate. The spacing between the round tubes is only 1.77.
Check Stock

Omninmo NPT Pipe Tap Set Thread Forming Taps High Speed Steel Drill Bits Thread Tap Attack Pipe Plate Hand Tapping for Cleaning or Re-thread Damaged or Jam Pipe Threads Size G3/4 55 Degrees

  • High Strength Material: Omninmo pipe tap set is different from the traditional carbon steel material. Our pipe taps is made of composite steel material, which is more durable and Higher hardness..
  • Professional Cutting Tools: Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
  • Convenient and Durable: Uncoated tools feature just the base substrate without any additional treatment or coatings,Carbon steel pipe taps are designed to clean or rethread to damage or block pipe threads,cuts internal threads in pipes..
  • Universal size: Nominal size of the tap is that of the pipe fitting being tapped. Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). The size is 3/4.Omninmo NPT Thread Forming Taps is ideal for pipe fittings..
  • Product Guarantee: If you have any questions, Please contact us in time, We will reply to you immediately to solve your problem..
Check Stock