Categories

Best Carbon Steel Tubing

Parker Hannifin 61HD-3-pk5 Hi-Duty Nut/Sleeve Fitting, Brass, 3/16\ Compression Tube (Pack of 5)

  • Not flaring, soldering or other tube preparation.
  • One piece nut and sleeve reduces installation time.
  • Use with chopper, seamless steel and thermoplastic tubing.
  • Steel tubing must be cold drawn and annealed seamless low-carbon per sae J524 with a maximum hardness of Rockwell B65.
Check Stock

Capri Tools Telescopic Tube Cutter, 1/8-1-3/8 in.

  • The Telescopic Tube Cutter lets you easily make clean and precise tubing cuts on hard and soft copper, aluminum, brass, thin-walled steel, and plastic tubing in 1/8 to 1-3/8 in. outer diameter.
  • Heavy-duty ergonomic tightening knob with ultra-smooth turns gives you maximum control of cutting pressure. Precision four-roller set helps make precise cuts easy. Rollers also have flare grooves for close-to-flare cutting.
  • Fast, tool-free blade replacement: release or secure the detent wheel pin with a simple push.
  • Built-in retractable reamer deburring tool with replaceable blade.
  • Comes with a high carbon steel cutting wheel for making clean and precise cuts.
Check Stock

(5 ft - 10 ft Rolls) KARBXON - 1 Meter Wide (39.8 in) - Carbon Fiber Aramid Fabric - Yellow - 3K - 240g/meter - Twill Weave - Advanced Fiber Cloth Fabric - Wide Hemmed Fabric for Repair, DIY Projects

  • [ACTUAL DIMENSIONS- 25mm OD, 21mm ID, 1250mm Length, 2mm Wall Thickness] [NOMINAL DIMENSIONS- 1in OD, 13/16in ID, 49.2in Length, 1/16in Wall Thickness].
  • Cut to length with an abrasive chop saw. Manufactured with a 3K twill weave which is the optimum weave for carbon fiber tubing to maximize strength and formability. The matte finish is great for surface coating and adhesive bonding applications..
  • Extremely lightweight and high-strength composite alternative to aluminum or steel tubing with a much higher rigidity, which will minimize flexing under load and offer the stiffest structure possible. It is the ideal choice for your application..
  • Carbon fiber composite tubing is used in various high-performance applications like, RC aircraft, drones, helicopters and quadcopters, sports equipment, robotics, lightweight framing and frames..
  • It is incredibly lightweight, allowing it to be used in highly portable applications where weight is a premium. Corrosion, water, heat, and fatigue resistance that is great for outdoor applications and wet environments..
Check Stock

Pace Setter 70-1129 Black Exhaust Header

  • CNC-machined, port-matched thick steel flanges provide postive seal at the head and unrestriced flow into the primary tubes.
  • All tubing is mandrel-bent, 16-gauge carbon steel for excellent durability.
  • Available with standard black paint finish or optional ARMOR*Coat metallic ceramic coating.
  • Unsurpassed fit and easy to install with basic skills.
Check Stock

Carbon Fiber Tube - 3K Twill Weave Pattern, Matte Finish [Nominal - 3/4in OD, 9/16in ID, 49.2in Length, 1/16in Wall Thickness] [Actual - 19mm OD, 15mm ID, 1250mm Length, 2mm Wall Thickness]

  • [Actual Dimensions- 19mm OD, 15mm ID, 1250mm Length, 2mm Wall Thickness] [Nominal Dimensions- 3/4in OD, 9/16in ID, 49in Length, 1/16in Wall Thickness].
  • Can be cut to length with an abrasive chop saw. Manufactured with a 3K twill weave which is the optimum weave for carbon fiber tubing to maximize strength and formability. The matte finish is great for surface coating and adhesive bonding applications..
  • Extremely lightweight and high-strength composite alternative to aluminum or steel tubing with a much higher rigidity, which will minimize flexing under load and offer the stiffest structure possible. It is the ideal choice for your application..
  • Carbon fiber composite tubing is used in various high-performance applications like, RC aircraft, drones, helicopters and quadcopters, sports equipment, robotics, lightweight framing and frames..
  • It is incredibly lightweight, allowing it to be used in highly portable applications where weight is a premium. Corrosion, water, heat, and fatigue resistance that is great for outdoor applications and wet environments. Clean cuts with an abrasive saw..
Check Stock

Breeze TB800 Standard T-Bolt Clamp Effective Diameter Range 8 - 8.31 203.2mm - 211.1mm

  • 3/4" (19mm) wide, 300 Series Stainless Steel Band.
  • Plated Carbon Steel Bolt, High Strength, One-Piece Stainless Steel Trunnion.
  • Meets or exceeds SAE Spec. J1508 for T-Bolt clamps.
  • Superior welded construction, Floating bridge liner.
  • Reliable, heavy duty method of assembling hose ducting connections and tubing..
Check Stock

Pondmaster DNR02200 Extra-Capacity 12-by-24-Inch Mechanical Filter,Black

  • 12" x 24" Filter Box with Carrying Handle.
  • Complete with 1" I. D. Tubing and Fittings.
  • Filter box with locking handle for ponds up to 1000 gallons with light fish population.
  • Filter connects to inlet side of pump (not included) with 1-inch tubing and fittings (included).
  • Carbon and polyester filter media pads trap debris as it is drawn into filter.
  • Finer, carbon-impregnated material filters water further.
  • activated carbon helps eliminate unwanted colors and odors.
Check Stock

VEVOR Pipe Notcher Punch and Press Tool for 0-50 Degree Tube Notcher Tool Notches 3/4\-3\ Round Tubing Bore Hole Pipe Knotcher Aluminium Frame Tubing Notcher for Cutting Holes Through Metal, Wood.

  • Quick Cutting: The tube notcher features precise sharpening saw teeth. It can achieve smooth and fast cutting. With a superior high-speed steel cutting edge, the incision is neat. Hole saw not included..
  • Sturdy Construction: The tubing and pipe notcher is made of premium A3 low-carbon steel, make the notcher run for years without breaking down. Besides, It is light and portable..
  • Humanized Design: This tubing notcher can make round cuts in pipe and tubing of kinds of shapes at any angle from 0-50 degrees flexibly. The rotatable base is suitable for any horizontal surface, adaptable to any worktable..
  • Simple Operation: Ergonomic design and built-in protractor make it easy to use. The pipe notcher tool can work with a 1/2" drill for grooving 3/4" to 3" pipe, vise, or benchtop mount..
  • Wide Application: As a helpful tool for making great joints for clean, secure welds, it may work with any standard drill press. In addition, our pipe notcher is adaptable to a large variety of round cutters, hole saws, and milling bits..
Check Stock

Exhaust Pipe Cutter Water Pipe Exhaust Pipe Quick Cutter Cutting Tool For Auto Repairing

  • Made of fine quality material, practical, easy to operate and use, wide application range, has a long service life..
  • Suitable for cutting thin wall tubing up to 3mm thick..
  • Perfect for cutting where space is restricted, 120° handle movement produces a 360° cutting action..
  • Perfect for cutting all exhaust pipes from 35-64mm diameter..
  • Zinc plated carbon steel frame with 4 hardened steel cutting blades..
Check Stock

BTSHUB Exhaust Pipe Cutter Tool, 3/4' - 3' Universal Exhaust Tailpipe Tube Cutting Pliers with 15 Blades for On- and Off-Vehicle Use

  • High-Efficiency Pipe Cutter: Quickly remove old exhaust pipes with the Exhaust Pipe Cutters.
  • Chain tubing cutter allows you to cut pipes and tubes from 3/4 to 3 inches (19 to 76mm) in diameter with a 3mm thickness. Suitable for mild steel, galvanized steel, copper, and aluminum pipes.
  • Unique Design: 10 inches (25.4cm) cutting wheel link chain wraps around your pipe even in tight restricted areas.
  • Pivot design ensures your cutting blades touch the outer walls of your pipe for smooth cuts. There is a cutting wheel on each roller for smooth tracking..
  • High-Quality Blades: High-quality carbon steel cutting blades effectively cut through metal and plastic.
  • Each exhaust tube cutter wrench tool features 15 cutter blade wheels, only a 1/4 inch rotation is needed for a complete cut..
  • Easy to Use: Pipe cutter wrench design allows you to anchor and create leverage when cutting into your pipes and tubes.
  • Once your tubing cutters are wrapped around the pipe, squeeze lightly and turn to cut into the material.
  • Comfortable Grip: 9.3 inches (23.6cm) exhaust pipe cutting tool has 3.8 inches (9.7cm) rubberized handles.
  • Cushioned for comfort and non-slip security..
Check Stock

HVAC Flaring and Swaging Tool Kit Flares OD Soft Refrigeration Copper Tubin

  • HVAC Flaring and Swaging Tool Kit Flares OD Soft Refrigeration Copper Tubing.
  • This is a heavy duty steel Flaring and Swaging Tool Kit for flaring and Swaging copper tubing.With this Flaring and Swaging Tool Kit you can flare or....
  • Copper tubing flaring tool + copper tubing swaging kit in a combination tubing flaring./swaging kit to fit all your needs.
  • For 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. Tubing. 5 Swage Adapters For: 3-in-1 (3/16",1/4",3/8") ,5/16",1/2",5/8"& 3/4" O.D.Tubing.....
  • Swivel type Swaging adapters and flaring cone are hardened steel chrome finished for easy operation Self centering, slip-on forged steel yoke Blow....
Check Stock

BoCID Tube Pipe Hose Bead Roller Intake Intercooler Piping Compatible with Clamps 5/8″ DIY Tool

  • This vise-mounted tool will form a perfect bead on the end of aluminium or copper tubing. Simply insert the end of the tubing between the dies and start cranking the turning handle. Give the wheel a quarter-turn with each full rotation of the tubing to gradually tighten the dies against the tubing..
  • Aluminum, steel or stainless steel Intake pipe -Aluminum, steel or stainless steel Intercooler pipe.
  • This his sturdy and cost effective tool makes it easy to add a professional looking bead to all types of tubing. Great for Aluminum up to 16 gauge wall thickness (0.065’’ or 1.65mm) and also suitable for Titanium up to 18 gauge (0.049’’ or 1.25mm)..
Check Stock

Grow Crew Hydroponic CO2 Enrichment Kit | Includes 20 lb Aluminum CO2 Tank, Carbon Accelerator C02 Regulator, Atlas 7 CO2 PPM Monitor and Active Air Rain System to Shower Your Plants with CO2

  • ✓ BUNDLE INCLUDES - 20 lb. Aluminum CO2 Tank (Empty), Carbon Accelerator CO2 Regulator w/ Flow Meter, Atlas 7 CO2 Monitor, Active Air CO2 Rain System - 20 ft, 6 eye-screws,1 T-Fitting, and a "Legalize Tomatoes" Sticker.
  • ✓ PERFECT CO2 ENRICHMENT KIT - The C02 Rain System showers your plants with CO2! Just affix the eye screws in the ceiling, slide the black laser drilled tubing through the eye screws, attach the plastic tubing from your CO2 Regulator and you've got CO2 raining down on your plants!.
  • ✓ CARBON ACCELERATOR REGULATOR W/ FLOW METER - The CO2 Release Kit provides you with the tools you need for proper CO2 enrichment. The regulator assembly features an industrial-grade 120-volt solenoid valve with 6 ft. power cord, a precise flow-gauge, and easy-to-read pressure gauge. The kit also includes 10 ft of tubing for dispersal, and connects directly to 20 lb. or 50 lb. tanks..
  • ✓ TITAN CONTROLS ATLAS 7 CO2 PPM MONITOR - Select CO2 PPM levels at 1000 PPM, 1250 PPM or 1500 PPM. Integrated photocell. Built-in calibration feature. Single button control. Enclosure resists dust, rust, and moisture. 5 Amps maximum/120 Volts/60 Hz..
  • ✓ 20 LB. ALUMINUM CO2 TANK - The 20 pound aluminum tank is brand new, and perfect for use with our CO2 regulator. Aluminu....
Check Stock