Best Carbon Steel Valve Fitting

Whirl-Pack Write-On Whirl-Pak Collection Bags - Box of 100 - C32520N

• Capacity: 1 Liter - Size: 7'' x 9'' - Material: 2 mil Tedlar PVF film - MADE IN USA.
• Our Tedlar bags utilize a patent pending 2-in-1 fitting. By combining a shut-off valve and Teflon-lined septum, you are able to fill the bag and remove the sample for analysis with one fitting. The stem is used to connect 1/8” ID tubing for filling and emptying the bag. The septum can be used for removing the sample using a syringe. Fittings are available in polypropylene, stainless steel, and Teflon..
• Guidelines: 1. Store Tedlar bags in a clean area away from potential contamination sources. 2. Tedlar bags are designed for use at atmospheric pressure. Over pressurization (003e2 psi) can cause the bags to burst. 3. Always ensure the bag, fitting, and tubing materials are appropriate for the compounds being sampled. 4. CEL Scientific does not recommend reusing Tedlar bags in most cases..
• To fill the bag: 1. Connect the appropriate tubing (1/8” ID) from a sampling source to the stem on the side of the fitting. 2. Open the valve by holding the stem and turning the top portion of the fitting counterclockwise one turn. 3. When the bag is full (approx. 90% capacity), close the valve by holding the stem and turning the top portion of the fitting clockwise until it is finge....

BrassCraft PSC1083 K5 Safety Plus Gas Installation Kit for Range Furnace and Boiler

• 5/8 In. OD x 48 in. length corrugated stainless-steel gas connector with ProCoat coating to withstand prolonged exposure to harsh household chemicals.
• Safety+PLUS Excess Flow Valve protects against gas fires and explosions - 3/4 In. MIP (with 1/2In. FIP tap) connection to gas supply or gas ball valve.
• Includes multiple steel fittings to fit most gas appliance inlets: 1/2In. MIP (with 3/8In. FIP Tap) fitting & 3/4In. MIP (with 1/2In. FIP Tap) fitting.
• Fits all current and most older five to six burner ranges, furnaces and boilers.
• Temperature rating: 32 Degree to 150 Degree F. Pressure rating: 1/2 psi certified.

Robinair 18560 A/C and Refrigeration Valve Core Remover/lnstaller

• Robinair Air Conditioning Valve Core Remover and lnstaller - the ideal tool for replacing damaged valve cores or performing A/C or refrigeration service that necessitates valve core removal.
• Attaches to 1/4 inch male flare access fittings and allows valve core removal and replacement without loss of refrigerant.
• Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a slower to operate stem-type valve.
• Ball valve features a corrosion resistant stainless steel ball for smooth action and a reliable seal.
• Durable brazed side fitting allows system access for various A/C service procedures.

A664 Ground Plug Valve 1/8 in 30 Psi

• Connects Fractional Tube (Interchangable with all major brands i.e..
• STAINLESS STEEL PLUG VALVE/3K PSI - ONE PIECE - SUPERLOK PLUG VALVE.

Propane Torch Weed Burner Torch - Weed Torch with Push Button Igniter and 6.5 ft Hose, High Output Outdoor Torch Kit for Garden Stumps Wood Ice Snow Roofing

• SOFT-HOSE P.O.L SAFETY VALVE DESIGN - Fitted with a 7/8"-14 TPI, left hand male propane bottle connection with a steel tip diameter of 2 3/8”, the screw is 1/4 18 NPT P.O.L..
• The operation to remove the hose: Reverse thread POL safety valve (loose by turning right, tight by turning left). Soft hose P.O.L valve fitting connect to any standard propane tank with an OPD valve. Brass valve construction and valve spool designed for use with standard size propane tanks.Size for fitting of the Propane Tank: 7/8-14LH (tank not included)..
• Latest 360 Degree Swivel Flame Mechanism. Maximum Flame length is 28 inch. Flame Back flow Prevention..
• Satisfactory Service: We provides THREE-YEAR FACTORY WARRANTY and a return/replace policy against defects in material and workmanship..
• Multifunctional Use: Burn wand and stumps, melt snow, sear meat or fish, light fires, solder, do wood grain burning, soften asphalt, remove paint from non-flammable surfaces..

Coway Aquamega 100 Water Purifier, 15.8 x 5.1 x 12.1, White/Silver

• Coway Aquamega 100 is an easy installation countertop water purifier that filters up to 300 gallons of water per filter set.
• It is a direct flow water purifier that does not require electricity nor any pre work to get clean and crispy tasting water..
• Its three-stage water purification includes sediment, carbon and post-carbon filters to remove up to 99. 9% of contaminants like lead, mercury, cyst, VOCs and chlorine and chloramine..
• Coway aqua Mega filtration is WQA certified according to NSF 42 and 53..
• Included components: Aquamega 100, 1 Faucet Mounted Diverter, 3 Faucet Adapter, 1 T-Valve (9/16"), 1 Drain Hose, 1 6.5 feet Tubling, 2 L-Fitting.

Rhinox Stainless Steel Needle Valve, Accurate CO2 Regulation in Solenoid Fish Tanks, Co2 Adjustment Valve, Used with Rhinox C02 Diffuser Set

• ...es the amount of CO2 that should be released into your aquarium water..
• For Optimal Development Of Inhabitants — All plants undergo a photosynthesis process that requires CO2 which they convert into oxygen. Your fish, shrimp, and other aquatic pets need to inhale this oxygen in order to survive and also exhale the carbon dioxide. Monitoring and regulating the amount of CO2 in your aquarium is essential to growing happy aquatic plants and pets..
• Durable Stainless Steel Interior With Aluminum Alloy — this valve is constructed with high-quality, reliable stainless steel and aluminum alloy. The Aquarium C02 Regulator Needle Valve is lightweight and easy to operate. The precise structure of the needle valve features a special metal grinded surface and finely detailed threading for secure closure..
• Quick & Easy To Setup And Install — Ergonomically designed, the CO2 regulator valve quickly and easily installs into your CO2 diffuser set without the use of any additional tool. The practical nut lock design effectively locks the one way valve to the CO2 tube without any worry of coming loose or causing mishappenings..
• Various Other Uses Along With Aquariums — Although the most common use of the versatile Rhinox Needle Valve is the CO2 regulation system in ....

Flow control valve 3/8 Throttle valve check valve NPT 3000PSI Carbon Steel Hydraulic

mistcooling 250 PSI Misting Pump

• Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
• 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter the pump only when main power switch is turned on. Likewise, water flow will be cut off when power switch is turned off. No adjustment is ever required for solenoid valve..

Le Creuset Enamel On Steel Stockpot, 8 quarts, White

• 8-quart stockpot made of heavy-gauge carbon steel with porcelain-enamel finish.
• Loop side handles ensure a secure grip when lifting or transporting.
• Tight-fitting domed lid with a stay-cool knob traps heat, moisture, and nutrients.
• safe for use on all heat sources, including induction.
• Measures approximately 9-3/4 by 11-1/2 by 10 inches.

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

• UNIVERSAL QUICK COUPLER - The 1/4'' NPT universal couplers (male and female) which fit Industrial (I/M), ARO (A) and Automotive (T) so you do not worry about whether it is fitting or not. Heavy duty steel air fittings are ideal for general purpose applications and the brass has good solid and durability..
• SWIVEL QUICK PLUGS - The special design of 1/4" basic swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose. Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life. The maximum operating pressure is 300 psi..
• HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
• TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe ....

iBetter 2 PCS Thick Carbon Fiber License Plate Frames, Car Licence Plate Holder Covers with Bolts, Washers and Screw Caps for US Standard (2 Holes Wide Carbon Fiber)

• License Plate Carbon Fiber Frame- Matte black license plate holder is an aluminum metal bottom frame with carbon pattern printed on the surface (NOT Real Carbon Fiber License Plate Frame). Heavy duty frame, durable, corrosion-resistant, rust-resistant, weather -resistant, and fade-resistant. Lasting as new after using for a long time. Comes in 2 pack, suitable for front bumper license plate bracket and rear license plate holder. 4 hole frame can install firmly.
• For Universal US Liscense Plate-This License plate frame has wide upper and lower edges, which will cover the name of the continent. Please check whether it complies with local license plate installation regulations before purchasing.Fits all US and Canada 6 "x 12" standard/novelty/personalized license plates. TSuper thick aluminum frame, Multi-layer protection treatment, license plate frame for women, men, the best-personalized custom plate frame gift.
• Easy To Install- includes all License Plate Fasteners, you can easily install front and rear license plates without purchasing any additional hardware. The stainless steel license plate screw are suitable for the license plate mount of most models. The carbon license plate screw caps perfectly decorate the carbon fiber frame. GIFT-The aluminum Ti....

Brio B.P.A. Free 5 Gallon Plastic Crown Cap Reusable Water Bottle Container

• This non-portable water expansion tank is for closed loop hydronic heating system piping to control the thermal expansion of hot water and maintain system pressure below the relief sett of the relief valve.
• The carbon steel tank is pre-charged at 12 psi, has a 4.5 gallon volume, and features a durable expansion membrane preventing minimizes loss of the air change and ensures long and trouble-free life for the system.
• Made of carbon steel with epoxy finish, mounts to supply piping, with 1/2 inch MNPT system connection and .302-32 inch charging valve connection for on-site charging of the tank.
• Maximum pressure 60 psi and can be used in residential or commercial hydronic heating systems.
• Use in tandem with your hot water heater to absorb increased water volume ensuring long and trouble-free life for the system.