Categories

Best Carbon Structural Steel

Lenox - 29232CLB72360 Classic Tuff Tooth Band Saw Blade, Bimetal, Regular Tooth, Wavy Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 18 TPI

  • Tuff tooth design reduces tooth strippage.
  • Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
  • Good for cuts in cylindrical solids, rectangular tubes, and structural shapes.
  • Wavy tooth set helps prevent stripping for cutting thin workpieces.
  • M-42 high-speed steel tooth edge for heat and wear resistance.
Check Stock

A36 Steel Round Rod, Unpolished (Mill) Finish, Hot Rolled, ASTM A36, 1\ Diameter, 36\ Length

  • A36 carbon steel is a structural steel that has better formability than 1018 carbon steel.
  • Hot rolled to attain the specified dimensions.
Check Stock

Lenox Classic Tuff Tooth Band Saw Blade, Bimetal, Hook Tooth, Raker Set, Positive Rake, 186\ Length, 3/4\ Width, 0.035\ Thick, 3 TPI

  • Hook tooth is suitable for general-purpose cutting and can be used on materials that produce a discontinuous chip.
  • Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
  • Good for cuts in cylindrical solids, tubular shapes, and structural shapes.
  • M-42 high-speed steel tooth edge for heat and wear resistance.
  • Raker set for general-purpose cutting applications.
Check Stock

A36 Steel Sheet, Unpolished (Mill) Finish, Hot Rolled, ASTM A36, 0.25\ Thickness, 12\ Width, 12\ Length

  • A36 carbon steel is a structural steel that has better formability than 1018 carbon steel.
  • Hot rolled to attain the specified dimensions.
Check Stock

Lenox Diemaster 2 Band Saw Blade, Bimetal, Regular Tooth, Wavy Set, Positive Rake, 93.5" Length, 1/2" Width, 0.025" Thick, 14-18 TPI

  • Vari-tooth design for faster cutting rates than regular tooth design and smooth cuts.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Wavy set helps prevent stripping for cutting thin workpieces.
Check Stock

Lenox - 76123D2B51638 Diemaster 2 Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 64.5\ Length, 1/2\ Width, 0.025\ Thick, 18 TPI

  • Regular tooth design for general-purpose cutting.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Raker tooth set for general-purpose cutting applications.
  • Flexible back is suitable for contoured cuts.
Check Stock

Lenox - 80209D2B72390 Diemaster 2 Band Saw Blade, Bimetal, Hook Tooth, Raker Set, Positive Rake, 94\ Length, 1/2\ Width, 0.025\ Thick, 14 TPI

  • Hook tooth is suitable for general-purpose cutting and can be used on materials that produce a discontinuous chip.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Raker tooth set for general-purpose cutting applications.
Check Stock

Lenox - 72100CLB72360 Classic Tuff Tooth Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 8-12 TPI

  • Vari-tooth design for faster cutting rates than regular tooth design.
  • Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
  • Good for cuts in cylindrical solids, rectangular tubes, and structural shapes.
  • M-42 high-speed steel tooth edge for heat and wear resistance.
  • Vari-raker tooth set for multipurpose cutting applications.
Check Stock

Lenox - 93328RPB72360 RX+ Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 93\ Length, 3/4\ Width, 0.035\ Thick, 5-8 TPI

  • RX+ tooth design reduces strippage at high feed rates.
  • Bimetal for cutting carbon steel and structural steel.
  • Good for cuts in tubular shapes, structural shapes, and tubular bundles.
  • Optimized variable pitch and set sequence for quiet cutting and low vibration.
  • Made of M-42 high-speed steel for heat and wear resistance.
Check Stock

Lenox - 80162D2B51640 Diemaster 2 Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 64.5\ Length, 1/2\ Width, 0.025\ Thick, 10-14 TPI

  • Vari-tooth design for faster cutting rates than regular tooth design and smooth cuts.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Vari-raker tooth set for general-purpose cutting applications.
Check Stock

Lenox RX+ Vari-Raker Band Saw Blade, Bimetal, Regular Tooth, Extra Heavy Set, Positive Rake, 222\ Length, 1-1/4\ Width, 0.042\ Thick, 2-3 TPI

  • RX+ vari-tooth design reduces strippage at high feed rates.
  • Bimetal for cutting carbon steel and structural steel.
  • Good for cuts in tubular shapes, structural shapes, and tubular bundles.
  • Optimized variable pitch and set sequence for quiet cutting and low vibration.
Check Stock

Forney 49620 Hot Rolled Plate 1/4 x 4 x 12

  • Suitable for most light and medium duty projects.
  • Packaging of this item may vary as we transition to our new look..
Check Stock

Full Speed Ahead - K-Force Series Carbon Bicycle Stem with +/- 6 Degree Rise | CSI Technology | for Road Bike | 31.8 x +/- 6 x 90 mm

  • CARBON ADVANTAGE: 3-D forged and CNC machined from aluminum then it’s combined with a carbon structure using our CSI technology that permanently bonds carbon to alloy to create a true hybrid product, with many of the benefits of aluminum and carbon.
  • VARIATION: you have the option to run this stem at a + or – 6 degrees to suite your racing style.
  • CSI TECHNOLOGY: (Carbon Structural Integration) is a fusion of carbon fiber and aluminum. A structural outer layer of carbon fiber is wrapped around a component’s aluminum core to increase the part’s stiffness and create an elegant carbon aesthetic.
  • STYLISH AESTHETIC: UD carbon finish with graphics.
  • WARRANTY: Full Speed Ahead warrants all products to be free from defects in materials or workmanship for a period of two years after original purchase.
Check Stock