Categories

Best Case Fans 140mm Pack

upHere 3-Pack High Airflow Quiet Edition White LED Case Fan pwm 4in for PC Cases T4WT4-3

  • PC fan splitter Y cable connects 2 computer case fans to a single motherboard fan header.
  • 1 to 2 case fan splitter connects an additional fan to....
  • Mobo 4 pin fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using....
  • Master / slave PWM splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed....
  • Double CPU fan splitter adds 4 fans with the Cost-effective 2-pack of fan header splitter.
  • Sleeved and wrapped black 4-inch PWM Y cable provides a....
  • 3-pin & 4-pin fan compatible with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler....
Check Stock

CORSAIR OBSIDIAN 450D Mid-Tower ATX Case - Airflow Edition

  • Includes two AF140L intake fans, and a rear AF120L exhaust.
  • Tool-free SSD cages hidden behind the motherboard tray. Case Dimensions- 19.4 x 8.2 x 19.5 inches.
  • Radiator and fan compatibility : Top: 3 x 120mm or 2 x 140mm (360mm radiator) Front: 2 x 140mm or 2 x 120mm (2 x 140mm included) (280mm radiator) Bottom: 2 x 120mm (240mm radiator) Rear: 1 x 120mm (120mm included) (120mm radiator).
  • Two USB 3.0 front panel connectors, plus headphone and microphone.
Check Stock

Aigo Halo Ring LED Case Fan 140mm 14cm Quiet Edition Sleeve Bearing High Airflow Silent Cooling Fan for Computer Cases, CPU Coolers, and Radiators (140mm, Triple Pack White)

  • Four LED Colors Available: As a excellent LED cooling system, It has four LED color for customer choose: Red/White/Blue/Ice Blue, the fan can provide a very gentle and dreamlike expression by emitting soft, constant, and bright led light..
  • Features standard 140mm mounting holes :  140mm fan is a best replacement for common 140mm case fans and perfect fitment on 140mm water cooling radiators. It provides high cooling efficiency..
  • Hydraulic Bearing with Low-Noise Design：The hydraulic bearing with high quality. making aigo fan spin at 1500RPM at low 29dBA and deliver an air flow of up to 49.8CFM.
  • Anti-vibration Mounting System:  The fans come with eight pre-installed rubber anti-vibration pads reduce vibration between fan and PC case. Ultra-Silent Case Fan that Keeps Noise Level Down to 29dBA.
  • IMPORTANT NOTE: Use ONLY One Type of Power Connection at a time. You may short circuit your motherboard if you connect both connectors at a time..
Check Stock

upHere Halo Ring Led 140mm case Fan 3 Pack Hydraulic Bearing Quiet Cooling case Fan for Computer Mirage Color LED Fan 3 pin with Anti Vibration Rubber Pads(Red) 14CMR3-3

  • 1 Four LED Colors Available: As a excellent LED cooling system, It has four LED color for customer choose: Red/White/Blue/Ice Blue, the fan can provide a very gentle and dreamlike expression by emitting soft, constant, and bright led light..
  • 2 Features standard 140mm mounting holes :  140mm fan is a best replacement for common 140mm case fans and perfect fitment on 140mm water cooling radiators. It provides high cooling efficiency..
  • 3 Hydraulic Bearing with Low-Noise Design：The hydraulic bearing with high quality. making aigo fan spin at 1000RPM at low 25dBA and deliver an air flow of up to 49.8CFM.
  • 4 Anti-vibration Mounting System:  The fans come with eight pre-installed rubber anti-vibration pads reduce vibration between fan and PC case. Ultra-Silent Case Fan that Keeps Noise Level Down to 29dBA.
  • 5 Innovative Design Enabkes Quiet And Efficient: The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation..
Check Stock

Phanteks Enthoo Pro Full Tower Chassis with Window Cases PH-ES614P_BK,Black

  • Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks’ new redesigned and better performing SP series fans. Budget friendly case. 2 x USB 3.0, USB-C GEN 2, Mic, Headphone Front Port.
  • Appearance: Brushed plastic with an aluminum appearance.
  • Stealth interior: hidden PSU / hidden HDD.
  • The PWM hub makes it possible to control all the connected fans (also 3-pin fans) with PWM function through 1 PWM connector and create a better cable management.
  • Extensive water cooling support. Provides up to 4 diff installation areas for radiators vary from single to triple (120mm & 140mm form factors). Clearance for push-pull fan configurations.
  • Innovative liquid cooling mounting systems.Closed HDD panel strengthens the chassis’ rigidity, even when both HDD cages are removed. Removable Drop-n-Lock SSD bracket that can be installed on 2 different locations. (1 bracket incl.).
Check Stock

Betan 10PCS 140mm Wire Black Fan Grill Guard for Axial Brushless Fan

  • Stops all size fingers and other intrusions from getting into 140mm fans.
Check Stock

Phanteks Enthoo Pro Full Tower Chassis without Window Cases PH-ES614PC_BK,BLACK NO WINDOW

  • Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks' new redesigned and better performing SP series fans. Budget friendly case. 2 x USB 3.0, USB-C GEN 2, Mic, Headphone Front Port.
  • Appearance: Brushed plastic with an aluminum appearance.
  • Stealth interior: hidden PSU / hidden HDD.
  • The PWM hub makes it possible to control all the connected fans (also 3-pin fans) with PWM function through 1 PWM connector and create a better cable management.
  • Extensive water cooling support. Provides up to 4 diff installation areas for radiators vary from single to triple (120mm & 140mm form factors). Clearance for push-pull fan configurations.
  • Innovative liquid cooling mounting systems.
  • Closed HDD panel strengthens the chassis' rigidity, even when both HDD cages are removed. Removable Drop-n-Lock SSD bracket that can be installed on 2 different locations. (1 bracket incl.).
Check Stock

Segotep T1 Full-Tower E-ATX Gaming PC Case, Graphics Card Vertical Mounting w/Tempered Glass Side Panel, USB 3.0 Type-C I/O, Cable Management/Optional 360mm Radiator (No Fan Included)

  • 【Vertical GPU Mount Ready】 Computer gaming case allows users to securely mount the graphics card, or any PCI Express card vertically inside your case. Different from Graphics Card horizontal installation, It’s no need to worry about deformation..
  • 【Spacious Open interior】Gaming computer case supports up to E-ATX motherboard, and up to 360mm water cooling radiator in front or 360mm in rear, with vertical GPU 345mm support which no need to worry about deformation..
  • 【Show Off Your Lights】E-ATX PC case with 0.7mmSPCC transparent tool-free glass side panel allows for a great view of your RGB components and internal hardware..
  • 【Optimal Cooling Performance】Superior airflow with space for up to 7 pc case fans. The detachable fan bracket of the full-tower case can install 120mm or 140mm fans*3, and one 120mm on the top of the case, rear-mounted support optional 120mm fan*3 or 140mm fan*2..
  • 【DUST-PROOF Design】The upper and lower parts are equipped with Pull-out dustproof filters, including the magnetic dust proof net on the front panel, which can effectively prevent dust....
Check Stock

Zeus GAMDIAS Gaming ATX Mid Tower Gaming Computer PC Case with Tempered Glass and ARGB LED Strip, RGB Motherboard Sync

  • ... cooling radiator on the front and top, up to 120mm of 6 fans and 350mm long graphics card, high CPU cooler up to 168 mm, additional 2.5" SSD trays at the back panel, and easy-access dust filters at the top.
  • Excellent Air Flow for Low Temperature: The Mid Tower ATX PC Case is allowed to upgrade for Top: 2 x 120mm, 2 x 140mm computer case fans.
  • Rear: 1 x 120mm for outstanding ventilation. With AIO coolers up to 360mm for the front and top, it's the best gaming case to keep your PC temperature low..
  • Innovative and Extraordinary Design: Gamdias Mid Tower Case with innovative front RGB lighting panel with mixed glossy and matte black design brings the gaming PC chassis market a different and elegant design choice and makes your system builds astonishing..
  • Great Expandability for Your System Config.: With 2 x 3.5” HDD bays or 2 x 2.5” HDD Cages/ 2x 2.5" Tray, USB3.0 x1, USB2.0 x2, and the LED button, the desktop pc case gives DIY builders ultimate flexibility to personalize their PC. Furthermore, it supports different mobo from EATX, ATX, Micro-ATX, Mini-ITX . 7 expansion slots all....
Check Stock

Apevia LP314L-RGB Lunar Pro 140mm Silent Dual-Ring RGB Color Changing LED Fan for Gaming with Remote Control, 32x LEDs & 8X Anti-Vibration Rubber Pads (3-pk)

  • Apevia 140mm Silent Case Fan w/ 32x RGB Color Changing LED Lights (16 Outer Ring / 16 Inner Ring) & 8x Anti-Vibration Rubber Pads (4 on Each Side).
  • Comes with controller box that supports up to six specially designed compatible fans and remote control to change color and pattern of the lights..
  • Up to 366 different color and style combinations. Can speed up and slow down as well as change the brightness of the LED lights via remote control. Fan speed cannot be changed with the controller..
  • 140mm x 140mm x 25mm. Fan Speed: 1200 +/- 10% RPM. Air Flow: 59.6 CFM. Low Noise Level: 29.4 dBA. Life Expectancy: 25,000 Hours. Control Box comes with 4-pin connector for connecting to power supply. Case screws are included..
  • High quality control standards provide reliability and extended use of the fans..
Check Stock

CORSAIR 7000D AIRFLOW Full-Tower ATX PC Case Black

  • Build your legacy with the 7000D AIRFLOW, a full-tower case for your most ambitious PC builds – offering easy cable management, a spacious interior, and massive cooling potential with room for up to three simultaneous 360mm radiators..
  • A high-airflow optimized steel front panel delivers massive airflow to your system for maximum cooling..
  • The CORSAIR RapidRoute cable management system makes it simple and fast to route your major cables through a single hidden channel, with an easy-access hinged door and a roomy 30mm of space behind the motherboard for all of your cables..
  • Includes three CORSAIR 140mm AirGuide fans and PWM fan repeater, utilizing anti-vortex vanes to concentrate airflow and enhance cooling..
  • A massive interior accommodates up to 12x 120mm or 7x 140mm cooling fans, and makes it possible to install multiple radiators including 3x simultaneous 360mm or 2x simultaneous 420mm for extreme cooling..
Check Stock

Gamdias ATX Mid Tower Gaming Computer Case for Desktops and PC, 2X 200MM ARGB LED Lighting Case Fans Sync with Motherboard, Side and Front Tempered Glass, Aesthetics and Stylish Design

  • ...Your System:Supports up to 360mm/240mm/120 liquid cooling radiator on the front and top, up to 120mm of 6 fans and 350mm long graphics card, high CPU cooler up to 168 mm, additional 2.5" SSD trays at the back panel, and easy-access dust filters at the top.
  • Excellent Air Flow for Low Temperature: The Mid Tower ATX PC Case is allowed to upgrade for Top: 2 x 120mm, 2 x 140mm computer case fans.
  • Rear: 1 x 120mm for outstanding ventilation. With AIO coolers up to 360mm for the front and top, it's the best gaming case to keep your PC temperature low.
  • Innovative and Extraordinary Design: Gamdias Mid Tower Case with innovative front RGB lighting panel with mixed glossy and matte black design brings the gaming PC chassis market a different and elegant design choice and makes your system builds astonishing.
  • Great Expandability for Your System Config.: With 2 x 3.5” HDD bays or 2 x 2.5” HDD Cages/ 2x 2.5" Tray, USB3.0 x1, USB2.0 x2, and the LED button, the desktop pc case gives DIY builders ultimate flexibility to personalize their PC. Furthermore, it supports different mobo from EATX, ATX, Micro-ATX, Mini-ITX . 7 expansion slots allow you to fully utilize your motherboard’s expandability.
  • Clean Design for Component Assembly: With....
Check Stock

Yorelove 140mm Fan Dust Filter Mesh Magnetic Frame PVC Computer PC Case Fan Dust Proof Filter Cover Grills Black 4-Pack Ultra Fine Nylon Filter-140mm

  • 【Nylon Filter】140mm 5.51inch nylone fan dust filter cover grills,reduce the fan and parts cleaning time,prolong its'working life,even if filter....
  • 【Block Dust Great】Mesh Diameter is 0.18mm, which can facilitate ventilation, reduce the temperature of computer cabinet and fan, effectively....
  • 【Keep Airflow Good】Ultra Fine Nylon Mesh Would not Block of the Airflow From the Fans, Keep Fans Efficiency and Air Circulation in the Case,....
  • 【Application】 It can be used for home computer chassis fan dust filter, speaker grilles and other electrical / electronic products speakers dust....
  • 【Specifications & Package】140*140 mm/5.51 x 5.51 inches (L*W), mesh diameter of 0.18 mm. Package Includes: 4 x Magnetic Nylon Filter..
Check Stock