Categories

Best Cast Ball Valves

Water Filter Float Ball Valve 1/4 Inch Adjustable Float Valve Plastic Water Tank Float Valves for Ponds, Water Pump, Water Trough, Aquariums, Aquaculture, Water Tank, Reservoir (4)

  • Size and material: you can connect float valves to the 1/ 4 inch supply tube, you can install an appropriate number of water float valves according to the size of the water tank to meet your needs in different situations.
  • The ball of the water float valve is made of PE material, the other parts are made of POM material, low temperature resistance and corrosion resistance, durable and non-toxic, can serve you for a long time.
  • Adjustable design: the plastic water tank float valves come with adjustable arms, when the water level of the water tank is low, the gate of the float valve opens to ensure that water can enter, when the water level rises, the ball of the water float valve and the adjustable arm will form a flat angle and close in this state, realizing the automatic adjustment of high water level and low water level.
  • Wide applications: the adjustable sink float valve can be applied for ponds, small water tanks, toilet storage tanks, household water purifiers, pools, aquariums, aquaculture, reservoirs, industrial and large water tanks, etc., if needed, you can choose to use multiple float valves at the same time, so that water can be input faster.
  • Easy to operate: the angle of the valve ball is adjustable, you can flexibly set according to the requir....
Check Stock

Emglo E810-4VR 1.1 HP 4 Gallon Oil-Lube Twin Stack Air Compressor (Renewed)

  • This Certified Refurbished product has been tested and certified to work and look like new, with minimal to no signs of wear, by a specialized third-party seller approved by Amazon. The product is backed by a minimum 90-day warranty, and may arrive in a generic brown or white box. Accessories may be generic and not directly from the manufacturer..
  • Oil lubricated pump with cast iron cylinders provides over 1,500 hours of running life.
  • 125 max PSI enables more nails to be fired and provides a quicker recovery.
  • Dual soft start valves assist in cold weather start-up.
  • Ball drain valve for quick and thorough tank draining.
Check Stock

Mini Ball Valve 1inch NPT Female Male Thread 316 Stainless Steel Air Liquid Steam Shut-Off Valve

  • MATERIAL: this ball valve is made of 316 stainless stell material for higher corrosion resistance.
  • TWO DIRECTIONS: Inline valve for connecting two pipes going in the same direction.
  • Double-seal system allows flow to go in either direction.
  • WIDE APPLICATION: our steel Ball valves can be widely used in various air, liquid, and steam applications.
  • EASY TO OPERATE: Ball valves is designed with On/ Off switch and quarter-turn easy operation for manual control.
  • CONNECTION: 1 inch standard connections, which makes mini ball valve suitable for most pipes.
Check Stock

6 Pieces Air Conditioning Refrigerant Angled Compact Ball Valve 1/4 Inch for R410A R134A R12 R22 AC HVAC and R12 R22 to R134A Adapters 6015 R134A Refrigerant Tank Adapter 6014 Vacuum Pump Adapter

  • Package includes: you will receive 3 pieces R12 R22 to R134A vacuum pump adapters refrigerant tank adapters, and 3 pieces air conditioning refrigerant angled compact ball valves, easy to match and convenient for your replacement.
  • Angled ball valves: in the package are 45 degree angle manual shut-off valves with 1/4 inch SAE male and female fitting.
  • For quick finger-tightening, the couplers nuts are deeply knurled designed for fast operation, the burst pressure ranges from the maximum 800 psi (55 bar) to the minimum 4000 psi (276 bar).
  • Vacuum pump adapters: these adapters are necessary for vacuum pumps, can adapt R12, R22 systems and R134a systems, are nice adapters for charging and service tools.
  • Easy to install: you can just tighten the adapter and get a good seal easily with hand, the adapters feature quick and easy connection and disconnection with high flow.
  • The ball valve can applied to hoses for charging and recovery, suitable for refrigerants R134a, R410A, R22 and R12 charging hoses or manifold, useful tools for HVAC, AC, car air condition maintenance.
  • Confident to use: made of copper, all angled ball valves and adapters in the package are durable for long-term service, provide simple and easy operation and installation, strong sealing for du....
Check Stock

PVC True Union Check Valve 1’’ Slip Swing Full Port Utility Check Valve Sch80 Socket Pool Ball Check Valve for Backflow Prevention

  • 【PVC Ball Check Valve】Schedule 80 PVC ball check valves have a spherical ball inside the valve body which works as a check to allow flow in one direction and close off to prevent back-flow..
  • 【INSTALLATION TIP】PVC union check valves are designed for VERTICAL installations, MUST be used in an upflow position to work properly. Check valves MUST be installed with the valve's flow arrow pointing in the direction of the flow. Do not install valve upside down.（NOTE: NO SPRING).
  • 【PVC Union Check Valve】True union check valve, can be taken apart for cleaning, allows for easy removal without breaking down the piping connection..
  • 【Material】1'' Slip check valve made of PVC material, O-ring with EPDM material, low-temperature-resistant, impact-resistance, ultraviolet-resistance, rust-resistance. Fits for Schedule 80 1 Inch Pipe..
  • 【Application】PVC Swing Check Valve 1’’(DN25) - Non-return or "one way" valve is ideal for flow control, such as commercial plumbing, aquariums, irrigation, swimming pools, water parks and OEM applications..
Check Stock

ROYHOO 4PCS 1/2 Inch Float Ball Valve Plastic Water Float Valve Mini Plastic Float Valve with Adjustable Arm for Automatic Water Level Control of Water Tank

  • Easy to use: you can have a automatic water level control by adjusting the angle which is formed by the float and the valve body, if the surface of water contacts the float, the water inlet switch will be automatically closed..
  • Quantity and measurement: we provide you with a total of 4 pieces 1/ 2 inch float ball valves, the valve total length is approx. 7.87 inch and a float length is about 3.74 inch, you can install different numbers of the water valves according to the size of the tank or pool..
  • Suitable condition: the float ball valve can be adapted to water temperature which ranges from 0 to 70 degrees Celsius, 0.01-0.8MPA water pressure is applicable, featuring with good control of the water inlet, will give a nice using experience to you..
  • Multifunction: our plastic water filter float ball valves are suitable for a variety of occasions, such as small swimming pools and storage tanks at home, more numbers of water valves should be available for you to install if water inlet is large, effectively solve the problem of taking water in a short time..
Check Stock

Wilkins 115-975XL2 1.5-Inch Lead Free Reduced Pressure Backflow Preventer

  • Reduced pressure principle backflow preventer consisting of a pressure differential relief valve located between twoindependently operated spring-loaded center guided check valves, “Y” pattern body.
  • Complete with two full port resilient seated ball valves for shut-off and four resilient seated ball valve test cocks.
  • Pre-plumbed backflow station. Assembly can be of the reduced pressure principle or of the double check type.
Check Stock

GIYO Mini Bike Pump, Portable Compact Bicycle Pump with Pressure Gauge, Tire Repair Kit, Perfect for Presta & Schrader Frame Mount for Road, Mountain & BMX Cycling, Ball Pump with Needle 120 PSI

  • [Clever Valve System]: The handhold bicycle pump combines with automatically compatible valve fit for Scharder and Presta valves. No changing valves needed, tight with Scharder and Presta valves without air leak..
  • [Carry-easily]: Lightweight and Durable handy cycling pump is equipped with mounting bracket which can attach tire pump to your bike frame, using hook and loop strap and fixing screws securely hold the pump in place..
  • [High Pressure PSI]: The maximum volume of the hand-operate bicycle pump is 120PSI, which can be used to inflate the bicycle tires and maintain the tire pressure. PSI value can be checked by pressure gauge during the inflation process..
  • [Multiple Functions]: This air inflation pump is suitable for Mountain , Road , BMX , MTB bike , Stroller , Electric bicycle , Kids bike. Comes with ball needle inflate that also fit for Football , Basketball , Volleyball , Soccer ball and other balls..
  • [Repair kits]: Tire repair tools included with 1 piece mini bike pump, grinding tablet, ball inflate needle, velcro strap, mounting bracket, 2 pieces of fixing screws and mini pry bars, 6 pieces of tire patches..
Check Stock

NorthStar Electric Air Compressor - 3.7 HP, 60-Gallon Vertical Tank

  • Durable cast iron oil-lubricated pump has one-piece cast iron crankcase and full cast iron cylinder body.
  • Durable Swedish stainless steel reed valves deliver long service life.
  • 2-cylinder design for low heat transfer between cylinders.
  • Heavy-duty 230V induction motor runs at 3,450 RPM for maximum performance and efficiency.
  • 60-gallon ASME-certified vertical tank provides more air for longer run times on air tools such as ratchets, impact wrenches, spray guns, hammers and more.
Check Stock

Goodridge In-Line Fuel Quick Disconnect Coupling - 5/16in. LCD005V

  • Durable die-cast body constructed from chrome-plated brass.
  • Features stainless springs, pin, latch, made with Viton O-rings and acetal shutoff valves.
  • Barbed hose ends provide simple attachment to common 3/16in., 1/4in., and 5/16in. hoses.
  • Double shutoff valves prevent fuel leakage during disassembly.
  • Perfect for fuel crossover or fuel line usage.
Check Stock

Eastman 60245 Crimp PEX Dual Washing Machine Outlet Box 1/2" Connection White

  • CONNECTION: 1/2-inch Crimp PEX (F10807) inlet connection and 3/4-inch Male Hose Thread (MHT) outlet.
  • BUILD: Sturdy construction made of heavy-duty plastic with 1/4- turn ball valves installed.
  • DESIGN: It has a right or left side drain connection. It can also be installed inverted for top-mount valves.
  • CONTENTS: Includes installed hot and cold water valves, support bracket, faceplate Snap-on frame accommodates up to 1″ drywall.
  • EASY INSTALLATION: This outlet box is designed for recessed residential applications.
Check Stock

Cash Acme 16372-0150 Residential Temperature and Pressure Relief Valve NCLX-8, 3/4 Inch

  • DESIGN: The NCLX Series relief valves feature a cast bronze body, brass, and stainless steel internal parts, silicone seat disc, and stainless steel pressure spring.
  • BRONZE BODY: Lead-free and superior reliability.
  • COMPACT: Pressure reducing and regulating valves.
  • CERTIFIED: To ASSE standard 1003 and CSA Standard B356.
  • Certified lead free complying with NSF 319.
  • ASSEMBLED AND TESTED: Prepared in Cash Acme manufacturing plant in Cullman, Alabama.
Check Stock

Cash Acme 18821 0150 Temperature and Pressure Relief Valve NCLX-5L, 3/4 in, Brass

  • DESIGN: The NCLX Series relief valves feature a cast bronze body, brass, and stainless steel internal parts, silicone seat disc, and stainless steel pressure spring.
  • BRONZE BODY: Lead-free and superior reliability.
  • COMPACT: Pressure reducing and regulating valves.
  • CERTIFIED: To ASSE standard 1003 and CSA Standard B356.
  • Certified lead free complying with NSF 372.
  • ASSEMBLED AND TESTED: Prepared in Cash Acme manufacturing plant in Cullman, Alabama.
Check Stock