Categories

Best Cast Bushing

TB Woods 1008 TL100858 Taper Lock Bushing, Cast Iron, Inch, 0.625\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

TB Woods 1108 TL110822MM Taper Lock Bushing, Cast Iron, 22 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

TB Woods 2517 TL251758 Taper Lock Bushing, Cast Iron, Inch, 0.625\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

TB Woods 2517 TL2517238 Taper Lock Bushing, Cast Iron, Inch, 2.375\ Bore, 1200 lbs/in Torque, Standard Design, Shallow Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

TB Woods 2012 TL201230MM Taper Lock Bushing, Cast Iron, 30 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

TB Woods 1610 TL161025MM Taper Lock Bushing, Cast Iron, 25 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

TB Woods 1108 TL110858 Taper Lock Bushing, Cast Iron, Inch, 0.625\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

Kluson Revolution G Style 3x3 Tuning Keys, Plastic Buttons

  • Kluson Revolution 19:1 'Gibson' mount with pearloid buttons, Vintage style KEDP-3801C.
  • Drop-in upgrade for instruments with Gibson style 2 hole mount and modern 25/64" or 10 mm) peghead hole. These normally use a screw in hex head bushing rather than a press in bushing..
  • Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit tuners with a screw-in hex head bushing, traditional Kluson two-screw mounting pattern and modern 25/64" peghole. The vintage outline, pearloid plastic keystone button and pin-stripes pay tribute to Kluson heritage while the brand new.
  • SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging..
Check Stock

Kluson Revolution 3X3 Locking Tuners, Keystone Buttons - NICKEL

  • Kluson Revolution 19:1 'Gibson' mount Locking tuners in Nickel with Pearloid Keystone buttons, Vintage style KEDPL-3801N.
  • Drop-in upgrade for instruments with Gibson style 2 hole mount and modern 25/64" or 10 mm) peghead hole. These normally use a screw in hex head bushing rather than a press in bushing..
  • Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit tuners with a screw-in hex head bushing, traditional Kluson two-screw mounting pattern and modern 25/64" peghole. The vintage outline, pearloid keystone button and pin-stripes pay tribute to Kluson heritage while adding a rear knob locking.
  • SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging..
Check Stock

Tuner - Kluson, Revolution G Mount, Pearloid Button, 3/side, Color: Nickel

  • Kluson Revolution 19:1 'Gibson' mount with pearloid buttons, Vintage style KEDP-3801N.
  • Drop-in upgrade for instruments with Gibson style 2 hole mount and modern 25/64" or 10 mm) peghead hole. These normally use a screw in hex head bushing rather than a press in bushing..
  • Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit tuners with a screw-in hex head bushing, traditional Kluson two-screw mounting pattern and modern 25/64" peghole. The vintage outline, pearloid plastic keystone button and pin-stripes pay tribute to Kluson heritage while the brand new.
  • SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging..
Check Stock

Martin SDS 2 Quick Disconnect Bushing, Ductile Iron, Inch, 2\ Bore, 2.187\ OD, 1.37\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Kluson Revolution Tuners 3x3 No Collar Locking Pearloid button Nickel KEDPNCL3-N

  • Kluson Revolution 19:1 'Gibson' mount with pearloid buttons, Locking Vintage style Nickel KEDPNCL3-N.
  • For the first time, a locking drop-in upgrade for instruments with Gibson style 2 hole mount and vintage (11/32" or 8.7mm) peghead hole. These normally use a press-in bushing rather than a screw in bushing..
  • Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit vintage tuners with a push-in bushing, traditional Kluson two-screw mounting pattern and vintage 11/32 inch peghole. The vintage outline, pearloid plastic keystone button and pin-stripes pay tribute to Kluson heritage while the brand new.
  • SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging..
Check Stock

Kluson Revolution Tuners 3x3 No Collar Locking Pearloid button Gold KEDPNCL3-G

  • Kluson Revolution 19:1 'Gibson' mount with pearloid buttons, Locking Vintage style Gold KEDPNCL3-G.
  • For the first time, a locking drop-in upgrade for instruments with Gibson style 2 hole mount and vintage (11/32" or 8.7mm) peghead hole. These normally use a press-in bushing rather than a screw in bushing..
  • Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit vintage tuners with a push-in bushing, traditional Kluson two-screw mounting pattern and vintage 11/32 inch peghole. The vintage outline, pearloid plastic keystone button and pin-stripes pay tribute to Kluson heritage while the brand new.
  • SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging..
Check Stock