Star SJ07S 3/4 HP Shallow Well Jet Pump, Cast Iron
- 3/4 hp shallow well jet pump with trouble-free, long-life TEFC motor.
- Features quick, reliable priming and 115/230 dual voltage motor with easy change voltage switch.
- Rugged cast iron pump and motor housing for long life.
- Well pump includes pump with built-in shallow well ejector, motor and pressure switch.
Check StockWayne 60017-001 Float Top Replacement Kit
- Service Repair kit for cast iron 0.75 HP shallow well jet pumps.
- Service kit includes an impeller, diffuser, motor shaft seal (mechanical seal), diffuser gasket and pump body gasket.
- This kit fits the Star ES07S, Flint & Walling EK07S and Zoeller 1461-0006 model jet pumps.
Check StockStar JHU10S High Pressure 1 HP Shallow Well Jet Pump, Cast Iron, Made in the USA using a Majority of US Content
- 1 HP cast iron shallow well jet pump made in the USA with a majority of US components.
- Provides additional volume and higher pressures needed for well pump and lawn sprinkling applications (See capacity charts for specific performance).
- 115/230 dual voltage continuous duty uni-frame 56 motor (NEMA J adaptable) with capacitor start provides maximum starting torque and thermal overload protects against overheating.
- Sturdy cast iron construction includes ejector for easy serviceability, pressure switch, special priming port for easy priming, carbon/ceramic mechanical shaft seal, and easy access drain plug for winterizing.
- 100% factory tested and covered by Star Water Systems 2-year limited warranty.
Check StockRed Lion RL14H 14.0 Gal. Horizontal Precharged Diaphragm Well Tank, 14-Gallon
- Jet pump and pre-charged pressure tank are factory assembled and ready to install.
- Pre-charged steel tank has a high grade diaphragm water chamber - 5. 3 to 14 gallons.
- 30/50 pressure switch, low profile, compact horizontal pressure tank.
- Can be set for use with 115 volts or 230 volts.
Check StockStar JHU07 3/4 HP Cast Iron Convertible Jet Pump for Shallow or Deep Wells, Made in the USA using a Majority of U.S. Content
- Cast iron 3/4 HP convertible well jet pump made in the USA using a Majority of US Content – includes pump, motor, pressure regulator body, flow control screw and pressure switch (order ejector and pressure gauge separately).
- Designed for use with single pipe shallow wells with suction lifts from 0' to 25 feet AND dual pipe deep wells with suction lifts up to 110 feet (See capacity charts for specific performance and ejector models).
- 115/230 dual voltage continuous duty uni-frame 56 motor (NEMA J adaptable) with capacitor start provides maximum starting torque and thermal overload protects against overheating.
- Sturdy cast iron construction includes ejector for easy serviceability, pressure switch, special priming port for easy priming, carbon/ceramic mechanical shaft seal, and easy access drain plug for winterizing.
- 100% factory tested and covered by Star Water Systems 2-year limited warranty.
Check StockBURCAM 400416T 3/4HP Stainless Steel Sewage Grinder Pump
- 3/4 HP HEAVY DUTY SEWAGE GRINDER PUMP: The pump is made of cast iron and stainless steel for longevity and includes a cast iron grinder impeller. This pump can be used in a new installation or to replace an existing sewage pump. Contractor grade PRO series built..
- GRINDER PUMP PERFORMANCE: The maximum head is 25 feet and the capacity is up to 4200 gallons per hour. ..
- HEAVY DUTY CONSTRUCTION: Solid cast iron and stainless steel construction equipped with a grinder type impeller made of cast iron..
- SEWAGE GRINDER PUMP: High performance for residential sewage applications. Reduces clogging of impeller and jamming situations..
Check StockWAYNE CWS100 - 1 HP Cast Iron Convertible Jet Well Pump - Up to 588 Gallons Per Hour - Heavy Duty Jet Well Pump, Black
- High-Capacity Well Pump - This 1 HP WAYNE jet well pump is perfect to move water quickly and efficiently from your well to your home. WAYNE model CWS100 is ideal for wells from 25-90 ft. deep..
- Tough And Durable - Durable cast iron volute with dedicated priming port for volute filling. Jet assembly is required and sold separately..
- Customizable Settings - Dual voltage (120V/240V) high efficiency square flange motor, with the default factory setting at 120V. Pressure switch is pre-set at 30-50 PSI for automatic operation..
- Additional Features - 1” NPT discharge with 1-1/4” NPT suction and 1” drive..
- Quality You Deserve - Proudly assembled in the USA for quality you can trust. Warrantied for 3 years for dependable, efficient performance..
Check StockB BURCAM QUALITY PUMPS SINCE 1978 400416TZ 3/4HP Stainless Steel Sewage Grinder Pump
- 3/4 HP HEAVY DUTY SEWAGE GRINDER PUMP: The pump is made of cast iron and stainless steel for longevity and includes a cast iron grinder impeller. This pump can be used in a new installation or to replace an existing sewage pump. Contractor grade PRO series built..
- GRINDER PUMP PERFORMANCE: The maximum head is 25 feet and the capacity is up to 4200 gallons per hour. ..
- HEAVY DUTY CONSTRUCTION: Solid cast iron and stainless steel construction equipped with a grinder type impeller made of cast iron..
- SEWAGE GRINDER PUMP: High performance for residential sewage applications. Reduces clogging of impeller and jamming situations..
Check StockStar ES05S 1/2 HP Cast Iron Shallow Well Jet Pump - Made in the USA with a Majority of U.S. Content
- Cast iron 1/2 HP shallow well jet pump made in the USA with a majority of U.S. Content.
- Designed for single pipe shallow wells with suction lifts from 0' to 25 feet, provides up to 930 GPH (3,520 LPH) and pressures up to 50 PSI.
- Sturdy cast iron construction includes ejector for easy serviceability, pressure switch, special priming port for easy priming, carbon/ceramic mechanical shaft seal, and easy access drain plug for winterizing.
- 115/230 dual voltage continuous duty uni-frame 56 motor (NEMA J adaptable) with capacitor start provides maximum starting torque and thermal overload protects against overheating.
- 100% factory tested and covered by Star Water Systems 2-year limited warranty.
Check StockHPDMC 6.5HP Gas Driven Piston Air Pump KOHLER RH65 Engine Belt drive gas-powered 20-Gal Hor Tank 17cfm @125psi for Workshop Compressor Portable Compressed System
- ✅【3-cylinder Cast Iron single-stage Pump】 HPDMC 6.5HP 20 Gallon horizontal portable Air Compressor has a powerful and reliable KOHLER RH65 engine / 196cc, helping to ensure trouble-free operation with easy start and the ability to drive high pump performance. With a convenient cart design for ideal portability, this 20 gallon tank air compressor is perfect for construction sites and homes. The cast iron pump delivers 17cfm at 120 PSI and is designed for long life and durability..
- ✅【20-gallon Horizontal Tank】 20-gallon horizontal gas-powered portable air compressor is built for heavy-duty applications and long life. Belt-driven full cast iron single-stage pump features W-type cylinder design for superior cooling, Crankshaft has bearings on both ends for excellent support. With a powerful and reliable 6.5 HP heavy-duty induction motor provides 17cfm, helping to ensure trouble-free operation with an easy start and the ability to drive high-pump performance..
- ✅【Fully enclosed metal belt guard】 Industrial wheelbarrow compressor is durably designed with a cast iron frame for reliable, long-lasting use. With the cast iron, twin cylinder pump with a thermally stable cast iron twin cylinder body and valve plate delivers a surge of air power. A....
Check StockRed Lion 97081001 Cast Iron 1-HP 17-GPM Shallow Well Jet Pump, Red
- Shallow well jet pump - ideal for use in pumping at depths of 25' or less.
- Heavy-duty cast iron construction - for years of service and reliability.
- Includes factory pre-set 30/50 pressure switch - produces up to 50 psi with automatic shut-off.
- 115/230 volt heavy-duty motor - TEFC design with simple connection to existing power source.
- 1-1/4 inch FNPT intake, 1 inch FNPT discharge, repair kits are now available - for additional information Please see owner's manual.
Check StockSitka Grinder Pants Optifade Timber 38 Regular
- 1. 0 HP COMPLETE GRINDER PUMP SYSTEM WITH 24 X 24 SEWAGE BASIN: Easy to install and includes a 24 x 24-inch heavy duty polyethylene basin with top and....
- HEAVY DUTY CAST IRON SEWAGE GRINDER PUMP: Sewage grinder pump has a robust cast iron body, a clog-free vortex impeller combined with a grinder to....
- AUTOMATIC OPERATION: The piggyback tethered float switch ensures automatic operation of the pump..
- PUMP CAPACITY: High pumping lift capacity of 50 vertical feet and the pumping is up to 2535 gallons per hour. Designed for residential sewage....
- SEPERATE 20 AMP BRAKER REQUIRED: Requires a 20 AMP breaker circuit..
Check StockPump, Grinder, 2 HP, 15a
- Price For: Each Pump Body Material: Cast Iron Cord Length: 25 ft. Off Point: 8 GPM of Water @ 100 Ft. of Head: 9 Shaft Seal: Silicon Carbide/Double Viton Lip Motor RPM: 3450 Max Head – Pumps: 108 ft. Manufacturers Warranty Length: 3 Yr. GPM of Water @ 60 Ft. of Head: 42 HP: 2 GPM of Water @ 5 Ft. of Head: 50 Hz: 60 Input Phase AC: 1.
- GPM of Water @ 15 Ft. of Head: 50 Max. Liquid Temp.: 140 Degrees F Max. Head: 108.0 ft. Voltage: 208/230 Amps: 15 GPM of Water @ 10 Ft. of Head: 50 Item – Grinder Pumps: Grinder Pump Item: Grinder Pump GPM of Water @ 80 Ft. of Head: 27 Base Material: Cast Iron Bearing Type: Upper and Lower Ball GPM of Water @ 35 Ft. of Head: 50 Pump RPM: 3450 GPM of Water @ 40 Ft. of Head: 48.
- GPM of Water @ 30 Ft. of Head: 50 Switch Type: Tether Impeller Material: Stainless Steel On Point: 15 Handle: Yes Housing Material: Cast iron Max. Head – Pumps: 108 ft. GPM of Water @ 45 Ft. of Head: 48 GPM of Water @ 70 Ft. of Head: 35 Min. Sump Pit Dia.: 24″ GPM of Water @ 50 Ft. of Head: 46 GPM of Water @ 25 Ft. of Head: 50 Switch Type – Pumps: Tether Impeller Material – Pumps: Stainless Steel.
- Cord Length – Pumps: 25 ft. Pump HP: 2 Height: 19-1/2″ Phase: 1 Motor Type: PSC Length: 12-1/2″ FNPT GPM of Water @ 55 Ft. of Head: 45 GPM....
Check Stock