Categories

Best Cast Iron Motor

Senco PC1131 Compressor, 2.5-Horsepower (Peak) 4.3 gallon

  • Cast Iron Sleeve / Cast Iron Head Cylinder.
  • Twin Tank Configuration. Heavy duty induction motor.
  • Standard equipment includes 1/4" universal coupler regulator, pressure gauge..
Check Stock

Little Giant WGFP-50 115 Volt, 4280 GPH Stainless Steel and Cast Iron Water Feature Pump with 19-Ft. Cord, Black, 566068

  • APPLICATIONS: Ideal for powering water features and pond filtration system with flows up to 4,280 GPH.
  • CONSTRUCTION: heavy-duty, stainless steel motor housing, cast iron base, professional-grade seal for enhanced motor protection.
  • CLOG-RESISTANT DESIGN: cast iron impeller capable of passing 1-3/16-inch diameter solids.
  • MOTOR SPECIFCATIONS: 115 Volts, 7 Amps, 590 Watts, thermally protected, energy-effienct PSC direct drive motor, rated for continuous duty, CSA listed in the USA and Canada.
  • PUMP SPECIFICATIONS: 2-inch FNPT discharge, 4280 GPH at 5-ft. lift, 30-ft. shutoff, 19-ft. cord with plug.
Check Stock

Barnes 104982 Model 2SEV1022L Sewage Pump, 1 hp, 240V, 1 Phase, 2

  • LARGE DISCHARGE CAPACITY: This model is designed with a maximum discharge head of 52-Feet and can pump up to 138 GPM.
  • DESIGNED TO PUMP RAW SEWAGE: Our 2SEV1022L model is a submersible pump that is specifically designed to handle 2-inch spherical solids and is ideal for typical raw sewage applications.
  • HANDLES SPHERICAL SOLIDS WITHOUT CLOGGING: Each pump is designed with a cast iron vortex impeller to allow for easy and effortless passage of 2-inch spherical solids without clogging or backing up.
  • HEAVY DUTY SPLIT CAPACITOR MOTOR: Every pump features a powerful permanent split capacitor motor for reliable, high performance with a longer motor life and a lower amp draw.
  • INDUSTRIAL GRADE: Great for commercial applications, the robust design or this pump features a corrosion resistant stainless steel shaft and hardware, heavy duty cast iron motor housing, and oil lubricated ball bearings.
Check Stock

Star SJ10 1 HP Cast Iron Convertible Jet Pump for Deep or Shallow Wells, Includes Injector Kit, Dual Voltage

  • Includes Injector and long venturi for deep well applications and short venturi for shallow well applications.
  • 1 HP cast iron convertible jet pump features dual voltage 115/230 motor with easy-change voltage switch.
  • Trouble-free, long life TEFC motor features quick and reliable priming.
  • Rugged cast iron jet pump and motor housing for long life.
  • For single pipe wells (0-25 ft) or two pipe wells (26-40 ft) and has 1 Inch NPT discharge and 1-1/4 Inch inlet.
Check Stock

NorthStar Electric Air Compressor - 3.7 HP, 60-Gallon Vertical Tank

  • Durable cast iron oil-lubricated pump has one-piece cast iron crankcase and full cast iron cylinder body.
  • Durable Swedish stainless steel reed valves deliver long service life.
  • 2-cylinder design for low heat transfer between cylinders.
  • Heavy-duty 230V induction motor runs at 3,450 RPM for maximum performance and efficiency.
  • 60-gallon ASME-certified vertical tank provides more air for longer run times on air tools such as ratchets, impact wrenches, spray guns, hammers and more.
Check Stock

NorthStar High-Flow Electric Air Compressor - 4.7 HP, 60-Gallon Vertical Tank

  • Durable cast iron oil-lubricated pump has one-piece cast iron crankcase and full cast iron cylinder body.
  • Durable Swedish stainless steel flex leaf valves deliver long service life.
  • 3-cylinder design provides consistent cooling for long pump life.
  • Heavy-duty 230V induction motor runs at 3,450 RPM for maximum performance and efficiency.
  • 60-gallon ASME-certified vertical tank provides more air for longer run times on air tools such as ratchets, impact wrenches, spray guns, hammers and more.
Check Stock

Pump, Grinder, 2 HP, 15a

  • Price For: Each Pump Body Material: Cast Iron Cord Length: 25 ft. Off Point: 8 GPM of Water @ 100 Ft. of Head: 9 Shaft Seal: Silicon Carbide/Double Viton Lip Motor RPM: 3450 Max Head – Pumps: 108 ft. Manufacturers Warranty Length: 3 Yr. GPM of Water @ 60 Ft. of Head: 42 HP: 2 GPM of Water @ 5 Ft. of Head: 50 Hz: 60 Input Phase AC: 1.
  • GPM of Water @ 15 Ft. of Head: 50 Max. Liquid Temp.: 140 Degrees F Max. Head: 108.0 ft. Voltage: 208/230 Amps: 15 GPM of Water @ 10 Ft. of Head: 50 Item – Grinder Pumps: Grinder Pump Item: Grinder Pump GPM of Water @ 80 Ft. of Head: 27 Base Material: Cast Iron Bearing Type: Upper and Lower Ball GPM of Water @ 35 Ft. of Head: 50 Pump RPM: 3450 GPM of Water @ 40 Ft. of Head: 48.
  • GPM of Water @ 30 Ft. of Head: 50 Switch Type: Tether Impeller Material: Stainless Steel On Point: 15 Handle: Yes Housing Material: Cast iron Max. Head – Pumps: 108 ft. GPM of Water @ 45 Ft. of Head: 48 GPM of Water @ 70 Ft. of Head: 35 Min. Sump Pit Dia.: 24″ GPM of Water @ 50 Ft. of Head: 46 GPM of Water @ 25 Ft. of Head: 50 Switch Type – Pumps: Tether Impeller Material – Pumps: Stainless Steel.
  • Cord Length – Pumps: 25 ft. Pump HP: 2 Height: 19-1/2″ Phase: 1 Motor Type: PSC Length: 12-1/2″ FNPT GPM of Water @ 55 Ft. of Head: 45 GPM....
Check Stock

Superior Pump 94525 1/2 Hp Shallow Well Jet Pump -with24L Tank , Black

  • 1/2 HP Shallow well jet with tank pumps water from well up to 25-vertical feet to lift.
  • For use in shallow well applications up to 25-feet.
  • Tough thermoplastic impeller and glass filled thermoplastic diffuser. Max Flow Rate : 12.5 GPM.
  • Continuous duty, thermally protected split capacitor motor.
  • Dual voltage motor (115/230V), cULus Listed.
  • Pre-mounted fully adjustable pressure switch and cast iron seal plate.
  • Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested.
Check Stock

JET JWP-13BT, 13-Inch Benchtop Planer, Helical Head, 18/26 FPM, 1Ph 120V (722130) & JJ-6HHBT, 6-Inch Helical Head Benchtop Jointer, 115V (718600)

  • Product 1: SMOOTH CUTS: Helical-style cutter head, with easy-to-change blades, provides a clean cuts..
  • Product 1: REDUCED SNIPE: Precision machined cast iron bed and steel cover assists in keeping boards flat..
  • Product 1: POWERFUL MOTOR: 2-HP 15-amp motor turns the cutter head at 10,000 RPM..
  • Product 1: MAXIMUM EFFICIENCY: Dual infeed speed control for either 18 fpm or 26 fpm, maximizes cut efficiency on different wood material types..
  • Product 2: True helical cut with 14 indexable four-sided carbide blades.
  • Product 2: Heavy-duty cast iron tables and fence.
  • Product 2: Fully-adjustable fence with locking stops at +/- 45 degree tilt dual direction for beveling.
  • Product 2: Internal blower motor moves dust and chips away from motor and cutter head.
Check Stock

Grizzly Industrial G0529-1 HP Oscillating Spindle / 12" Disc Sander

  • Cast Iron 14-1/2" x 14-1/2" oscillating sander table tilts to 45°.
  • Cast iron 17-3/4" x 10" disc sander table tilts to 45°.
Check Stock

Makita MAC2400 2.5 HP* Big Bore™ Air Compressor

  • Cast iron pump with Big Bore cylinder and piston is engineered to provide faster recovery time for improved performance.
  • Powerful 2.5 HP 4-Pole motor produces 4.2 CFM at 90 PSI for increased productivity and lower noise.
  • Roll-cage construction provides complete protection to withstand extreme jobsite environments.
  • Low AMP draw reduces incidences of tripped breakers at start-up.
  • Pump is oil-lubricated for cooler running temperatures and reduced wear.
  • Oil lubricated: Cooler running pump, minimizes wear.
  • Durable cast iron cylinder reduces wear and increases pump life.
  • Powerful 2.5 HP 4 Pole motor produces 4.2 CFM at 90 PSI for increased productivity.
  • Large automotive style industrial air filter for increased air intake and greater efficiency.
  • Pump runs at lower RPM (1,730) resulting in lower noise (79dB) and improved pump durability.
Check Stock

WEN 4214 12-Inch Variable Speed Drill Press,Orange & 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base

  • Product 1: Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed..
  • Product 1: Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches.
  • Product 1: Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III.
  • Product 1: 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2".
  • Product 2: Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc.
  • Product 2: Belt tilts anywhere from 0 to 90 degrees.
  • Product 2: Sturdy cast iron base prevents any heavy vibrations.
  • Product 2: 4.3 Amp motor provides up to 3600 RPM.
Check Stock

RIDGID 57398 RP 240 Compact Press Tool

  • Compact Benchtop Design: Easy transportation to different shop locations..
  • Ideal Starter Saw: Easily handles smaller cut application work and is suitable for scroll sawing (accommodates 1/8"-1/2" blades)..
  • Increased Rigidity: Upper and lower cast iron frame..
  • Reduced Vibration: Poly-v belt drive system maximizes power transfer from motor to blade..
  • Additional Work Support: 13-1/8" x 13-3/8" cast iron table with retractable extension wing (expands to 19")..
Check Stock