Categories

Best Cast Steel Pressure Seal

Kozyvacu Mini Split/HVAC/AUTO AC Repair Complete Tool Kit with 1-Stage 4.5 CFM Vacuum Pump, Manifold Gauge Set, Hoses and its Acccessories …

  • A Complete refrigerant changing tool kit for R410a, R134a, R134, R134A, R12, R22, R22A, R404A, R407C or R502. Especially designed for Mini-Split and HVAC system..
  • [Gauge] Blue gauge (low): 2-1/2" diameter, 0-500 PSI.
  • Red gauge (high): 2-1/2" diameter, 0-800 PSI. Max working pressure: 800PSI, Burst pressure: 4000PSI..
  • [Three Colored Hoses] Brass 'Quick Seal' fittings - 45 degree on one end, straight on the other - providing a leak-free seal. Sets of 6 inches long, 1/4 inch yellow, blue, and red hoses.
  • [Vacuum Pump] High performance vacuum pump with high torque design for easy startup and efficient operation and a Die-Cast Aluminum Housing. Cast aluminum housings make the pumps lightweight, yet durable. Easy to start and maintenance free, the thermally protected motor is durable for long time duty. While a AC system requires 500micron ultimate vacuum, Kozyvacu TA450 delivers better than 150 micron to ensure the vacuum meets your requirements..
  • [Complete Set] Full complete set for Mini-split/ HVAC and AUTO AC refrigerant recharging, includes 1) A pressure gauge set 2) Three colored hoses, with length of 4 ft, Red:1/4''-1/4'' 3) Two ¼ to 5/15 converters 4) 1x Can tap, 5) ¼ Flare male to ½ ACME female con....
Check Stock

Superior Pump 94525 1/2 Hp Shallow Well Jet Pump -with24L Tank , Black

  • 1/2 HP Shallow well jet with tank pumps water from well up to 25-vertical feet to lift.
  • For use in shallow well applications up to 25-feet.
  • Tough thermoplastic impeller and glass filled thermoplastic diffuser. Max Flow Rate : 12.5 GPM.
  • Continuous duty, thermally protected split capacitor motor.
  • Dual voltage motor (115/230V), cULus Listed.
  • Pre-mounted fully adjustable pressure switch and cast iron seal plate.
  • Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested.
Check Stock

Metal Pump oiler Can with 2 Spout，Hand Pump Oil Can injector for Car Bike Machine-Black

  • All steel body - double seamed base，Durable epoxy finish to resist rust，8 OZ reusable metal canister provides good lubricant capacity!.
  • Wide base for added stability，better lubricant placement! Seamless drawn body won't leak on the bottom..
  • Zinc die cast high pressure pump with a heavy-duty precision ground piston，High volume of fluid delivered with each stroke，adopts the new seal....
  • Seamless drawn steel body. Detachable rigid spout，oil nozzle USES pure copper to make the oil evenly..
  • Easy thumb pump trigger, compact and perfect for oil jobs in tight spaces for home, auto or other applications! Minimal parts, can be easily removed....
Check Stock

Goulds SJ20 Vertical Deep Water Well Jet Pump, 2 HP, Single Phase, 230 V.

  • Cast iron, semi-open, non clog impeller is dynamically balanced with pump out vanes for mechanical seal protection.
  • Cast iron volute type for maximum efficiency.
  • Designed for easy installation on A10-20 guide rail or base elbow rail systems.
  • Mechanical seal with SILICON CARBIDE VS. SILICON CARBIDE sealing faces for superior abrasive resistance, stainless steel metal parts, BUNA-N elastomers.
  • Corrosion-resistant stainless steel shaft. Threaded design. Locknut on all models to guard against component damage on accidental reverse rotation.
Check Stock

Cherne 271508 Pneumatic Test Plug, 1-1/2 in

  • Easy to install by threading into test tee and inflating bladder.
  • Design keeps work area and plumber dry, eliminating water backsplash.
  • Seals both plastic and hard-to-seal cast iron threaded cleanouts.
  • Natural rubber body provides a leak-free seal.
  • High-impact ABS threads for maximum durability. Removable and field repairable inflation valve fitting. Holds back up to 13 PSI or 30 ft. of head pressure.
Check Stock

DALSTRONG 6-Piece Premium Cookware Set - The Avalon Series - 5-Ply Copper Core - Hammered Finish - Silver - w/Lid & Pot Protector

  • Boasting unrivalled conductivity to quickly heat and evenly cook a full range of culinary delights, from blanching vegetables to poaching eggs, the....
  • Engineered for optimized heat distribution and retention, the Dalstrong Avalon Series features a Copper Forged Foundation that heats 5X better than....
  • Engineered with an ultra durable & extra-long cast stainless steel handle that evenly disperses heat and cools down quickly. The Dalstrong Avalon....
  • Included is a stainless steel lid that will last a lifetime, while still maintaining a perfect seal. The vented hole on the lid serves as a pressure....
  • Dalstrong Trust: Rocksolid 100% SATISFACTION OR MONEY BACK GUARANTEE, try it risk free. LIFETIME WARRANTY against defect. Renowned Dalstrong customer....
Check Stock

(2" Dia. x 50 ft) - HydroMaxx® White Flexible PVC Pipe, Hose, Tubing for Pools, Spas and Water Gardens

  • Extra long design to accommodate extreme pipe connections. | Dimensions H 7.75" x W 2.38".
  • The Fernco XL Coupling is 7.75" long, creating a stronger, and more durable coupling than any other on the market..
  • For sewer and drain, waste and vent piping. Maximum test pressure: 4.3 PSI.
  • Provides a positive seal for cast iron, plastic (PVC), lead, and steel drain connections. Made in the USA.
  • Proudly Manufactured in Michigan for Over 50 Years!.
Check Stock

Star JHU07 3/4 HP Cast Iron Convertible Jet Pump for Shallow or Deep Wells, Made in the USA using a Majority of U.S. Content

  • Cast iron 3/4 HP convertible well jet pump made in the USA using a Majority of US Content – includes pump, motor, pressure regulator body, flow control screw and pressure switch (order ejector and pressure gauge separately).
  • Designed for use with single pipe shallow wells with suction lifts from 0' to 25 feet AND dual pipe deep wells with suction lifts up to 110 feet (See capacity charts for specific performance and ejector models).
  • 115/230 dual voltage continuous duty uni-frame 56 motor (NEMA J adaptable) with capacitor start provides maximum starting torque and thermal overload protects against overheating.
  • Sturdy cast iron construction includes ejector for easy serviceability, pressure switch, special priming port for easy priming, carbon/ceramic mechanical shaft seal, and easy access drain plug for winterizing.
  • 100% factory tested and covered by Star Water Systems 2-year limited warranty.
Check Stock

Hardness Testing File Set

  • 【Accurately measured value】-----Precision measurement circuit to ensure Indication error ± 0.5% (HLD = 800), showing the value of repeatability 0.8%.
  • 【Leeb hardness measurement】-----Based Leeb hardness measuring principle, can detect a variety of metal materials.
  • 【Supports a variety of standard hardness】-----Real-time display and conversion: Brinell HB, Rockwell HRC, Vickers HV, Shaw HS, and three kinds of intensity values.
  • 【Applicable Materials】-----Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, nodular cast iron, cast aluminum alloy, copper zinc alloys (brass), an alloy of copper and tin, copper(bronze).
  • 【Application】-----1)Bearings and other parts.
  • 2)Failure analysis of pressure vessel, steam turbine generator group and equipment.
  • 4)Mechanical or permanent assembly installed.
  • 6)The original record of formal requirements on test results.
Check Stock

Low Pressure Seal Waterproof Cast Cover for Shower by TKWC Inc - #4738 - Low Pressure Seal - Watertight Foot Protector

  • DIFFERENT from traditional cast covers with a firm seal, this model has a soft, low pressure flexible seal against your skin..
  • Ideal for the WATERTIGHT PROTECTION of casts, bandages, rashes, abrasions, burns, cuts, wounds, IV and PICC line..
  • REUSABLE and QUALITY made. The seal is made from lightweight neoprene that can be reused for approximately 6-8 weeks..
  • EASY APPLICATION. It is easy to put on, just slide it up and over your foot until the seal makes contact with your skin..
  • Designed to fit EVERYONE in the family. Unique diaphragm allows for custom, secure fit around your leg. Made with NON-LATEX materials..
Check Stock

DOWELL Pistol Pump Oiler Metal Oil Can Lubrication Oil Gun 16oz 500ml Can Bottle with 2-Pieces Straight Spout Black HY050201

  • METAL BODY: This black hand pump oil can is made of high quality steel, durable, wear resistant. Epoxy finished surface is rust-proof and easy to clean..
  • 2 DETACHABLE SPOUTS: One is a 7-7/8"/200mm long steel straight spout with copper nozzle. The other is a 8-1/4"/210mm long flexible spout with copper nozzle which can be bend easily and orient-able hold the position perfectly. This makes high pressure oiler suitable to use at hard-to-reach areas..
  • HIGH PRESSURE PUMP: Built-in zinc die cast pump with a heavy-duty precision piston, over-sized handle and easy thumb pump trigger, easy to use. High volume of fluid is delivered with each stroke. It feels smooth, effortless and efficient when using..
  • LEAKPROOF: The whole oil can adopts the latest hydraulic seal structure with double-seamed and copper-brazed leak-proof joints..
  • COMPACT SIZE & WIDELY USED: 16oz/500ml hand pump oil can is perfect for one handed operation, especially in tight spaces. Easy to store and carry. It’s widely used in lubricating field, such as mechanical maintenance, automotive repair..
Check Stock

AMT Pump 4893-98 High Head Straight Centrifugal Pump Stainless Steel 1/2 HP 1 Phase 115/230V Curve A 1-1/4 NPT Female Suction 1 NPT Female Discharge Port

  • Closed impeller for use in pressure-boosting transfer and recirculation applications.
  • Not self-priming, requires flooded suction.
  • 300 series cast stainless steel with Viton mechanical seal and O-ring for resistance to corrosion and chemicals.
  • Maximum operating temperature 200 degrees F.
  • 1-1/4" female NPT suction port, 1" female NPT discharge port.
Check Stock

AMT Pump 489C-98 High Head Straight Centrifugal Pump, Stainless Steel, 3/4 HP, 1 Phase, 115/230V, Curve A, 1-1/4\ NPT Female Suction, 1\ NPT Female Discharge Port

  • Closed impeller for use in pressure-boosting transfer and recirculation applications.
  • Not self-priming, requires flooded suction.
  • 300 series cast stainless steel with Viton mechanical seal and O-ring for resistance to corrosion and chemicals.
  • Maximum operating temperature 200 degrees F.
  • 1-1/4" female NPT suction port, 1" female NPT discharge port.
Check Stock