94% Alumina Dense Castable Refractory Cement 22 Lbs.

  • Max. Service Temperature: 3270 F(1800 C).
Check Stock

Simond Store Castable Refractory Cement 94% Alumina Hydraulic Bonded Dense Cement Castable, 3270 F Rated, High Temp Cement for Foundry Furnace Fireplace Oven Stove Forge Lining - 22 Lbs

  • Excellent Mechanical Strength: Characterized with improved particle size distribution, reduced water demand, improved density, optimum cement/bond hydration, helps to enhance its structural strength and resistance to thermal shock compared to castable of similar compositions..
  • High Thermal Resistance: This refractory cement when applied offers high insulation value and can resist temperature up to 270°F / 1800°C..
  • Chemical Resistance: It provides outstanding resistance to the penetration of acid, neutral, and basic slags..
  • Enhnace Efficiency: Because of the low thermal conductivity and good volume stability offered, it increases thermal efficiency of the equipment..
  • Applications: Effective in applications at places with excessive wear and abrasive heating atmosphere. It can be put to use to precast residential fireplace, line BBQ Pit, Pizza Oven, Stoves, building Forges, Furnace Foundries and to cast custom shape and other complex or uneven structures..
Check Stock

Organic Fine Vermiculite - 15LB Box (70 Quarts) - for Indoor Gardening - Soil Amendment - Soil Conditioning - Grow Media for Gardening - Hydroponics - Mushrooms - Packing Material

  • Aluminosilicate Refractory Ceramic Fiber Board measures 1” X 18” X 24” in size..
  • Maximum Use Temperature: 2300 F (1260 C) | Density: 20-24 lb/ft³.
  • Compressive Strength at 25% deformation - 78 PSI, Permanent Linier Shrinkage - 3.5% Max at 2200 F when exposed to 24 hours soaking heat, Loss of Ignition(LOI) at 1832 F : 4-7.
  • Easy to cut: This Board can be easily cut with knife & hacksaw blade and can be drilled and machined. This board is not as strong as firebrick, it dents easily..
  • Uses: High temperature Board is used to repair or build, Wood Stove, Fireplaces, Pizza Ovens, Kilns, Forges, Internal Baffle of Wood Stove, Pellet Stove, Backup Insulation of Refractory Bricks and Castable Linings, Furnace Hot Face Linings and Boiler Wall Insulation, heat shields, combustion chambers and fire protection. Commonly used to make target walls, front plates and floor insulation..
Check Stock

Simond Store Ceramic Fiber Insulation Board (2300 F) (1\ X 18\ X 24\), Ceramic Thermal Insulation Board for Wood Stoves Fireplaces Furnaces Forges Kiln Pizza Oven - Pack of 1

  • Aluminosilicate Refractory Ceramic Fiber Board measures 1” X 18” X 24” in size..
  • Maximum Use Temperature: 2300 F (1260 C) | Density: 20-24 lb/ft³.
  • Compressive Strength at 25% deformation - 78 PSI, Permanent Linier Shrinkage - 3.5% Max at 2200 F when exposed to 24 hours soaking heat, Loss of Ignition(LOI) at 1832 F : 4-7.
  • Easy to cut: This Board can be easily cut with knife & hacksaw blade and can be drilled and machined. This board is not as strong as firebrick, it dents easily..
  • Uses: High temperature Board is used to repair or build, Wood Stove, Fireplaces, Pizza Ovens, Kilns, Forges, Internal Baffle of Wood Stove, Pellet Stove, Backup Insulation of Refractory Bricks and Castable Linings, Furnace Hot Face Linings and Boiler Wall Insulation, heat shields, combustion chambers and fire protection. Commonly used to make target walls, front plates and floor insulation..
Check Stock

Lynn Manufacturing Replacement Combustion Chamber Kit Olsen Airco 28562 88231B1 9200C 1158

  • KIT CONTAINS: Combustion chamber firepot 28562 88231B1 9200C cut in half, stainless steel straps, hardware, spacer, refractory cement and....
  • FIT: All models using OEM part numbers 28562 or 88231B1 or 9200C including model BCL-115/125, BCL-120(S)(ST), 145(S)(ST), BFL-120, BFL-120T, BFL-145....
  • INSTALATION: A caulking gun is required for proper installation. Protect from freezing: This kit contains a sealant that is damaged if frozen..
  • CAUTION: Protect this product from freezing to prevent damage to wet refractory..
Check Stock

Simond Store Ceramic Fiber Insulation Roll, 6# Density 2600F, 1' X 24' X 12.5' Fireproof Insulating Blanket for Pizza Oven Forges Foundry Furnace Wall and Dishwasher Insulation

  • Fireproof Insulation: Ceramic fiber blanket, rated to temperature of 2600F, 1 inch X 24 inches X 150 inches, density 6lbs..
  • Chemical composition: Alumina (32%-34%), Silica (49%-52%), Zircon (14%-18%)..
  • For Whom: Perfect for Blacksmiths, Pottery Workers, and Refiners..
  • Uses: Insulation for Forge, Furnace, Kiln, Knife Making, Pizza Ovens, Outside Ovens, , Wood Stove, Home Foundry, Heat Treatment & Glass furnaces and in process of Glass blowing, Turbine, Brazing, Welding, Soldering, Muffler packing, Fireplace Insulation, Boiler, Foundries, Refractory Wool, Glass Blowing, Jewellery Making, Fireproof Doors..
  • Easy Installation: Easy to install with mechanical fastening or high temperature adhesive such as sodium silicate, refractory cement or RTV silicone..
Check Stock

R.H. Peterson Gas Log Accessories PCW-4 Wilderness Pine Cones No particular finish

  • 4 Rustic pine cones to enhance your gas logs.
  • (1) 5" cone, (2) 4.5" cones, (1) 3.5" cone.
  • Made from durable refractory cement with realistic finish.
  • Adds a natural, rustic feel to the fireplace.
Check Stock

Rutland Products 211 Dry Mix Refractory Cement 10 lbs 10 Pound

  • Refractory mortar that is ideal for joining or repairing masonry flue tile in any gas or wood fireplace and wood, coal, or pellet stove chimney.
  • Can be used as a parge coating (thin over-coat) when building or repairing fireboxes.
  • Dry mix cement, just add water and trowel into place.
  • For interior use, rated up to 2550°F (1400°C).
Check Stock

Hellcote 3000 Refractory Cement for Ceramic Fiber Blankets to be Used on Any Brand Including All Hell's Forge Brand Propane Forge Units - 5 lbs

  • Proprietary blend of dry mix formulated especially for Hell's Forge brand propane forges and rated to 3000 Degrees..
  • Protect the life of your ceramic fiber blanket whether coating or recoating any brand you currently have..
  • Premixed and ready to use! Durable and castable, the end result is a cement coating that seals in loose fibers.
  • Easy application method - no mess - no fuss - no problem! Simply mix with water, apply and let dry!.
  • Continuing the Hell's Forge tradition of only offering MADE IN THE USA products!.
Check Stock

HearthSense Ventless Dual Fuel Gas Log Set - 18 in, 30,000 BTU, Manual Control - Model# VFL18M, Brown

  • TECHNOLOGY – Maximum 30,000 BTU Patented dual fuel Technology Which Heats up to 1,000 sq. ft. Area.
  • DEPENDABLE – Manual Control Included and Control Functions: On/Off, Temperature Control.
  • STYLISH - Hand-painted, cement log set made of superior refractory ceramics to ensure a long lifespan.
  • EFFICIENCY- The Quality and Efficiency of Vent Free Heating provides savings on your heating bill in addition to enhancing your home and hearth.
  • SAFE- 100% carbon monoxide and oxygen depletion safe, safety pilot light and oxygen depletion sensor included..
Check Stock

Siraya Tech Cast 3D Printer Resin Castable LCD UV-Curing Resin Easy to Print Use and Burn High Resolution 405nm Photopolymer Resin for Making jewelries and Metal Parts (Purple, 1kg)

  • Easy to Use - Our Siraya Tech Cast 3D Printer Resin is easy to use, it does not require a very dry environment or special additive to print and burn well, and this castable 405nm standard photopolymer resin has good plate adhesion. Both new users and experienced users can easily print the model..
  • Easier to Burn - This castable 3D printer resin material contains some wax, so it is easier to burn than many non-wax-based casting resins. This Siraya Tech Cast rapid resin is very suitable to be used in the production of small metal parts, which can fully demonstrate the core of the part..
  • High Resolution - Siraya Tech Cast 3D printer resin uses a unique and beautiful purple color, and the printed model has a high resolution and smooth surface. Its high resolution allows the model to be printed with precise details, which will make your model look great..
  • Easy to Print - This Siraya Tech Cast 3D printing resin can print quickly and has a high resolution, is easy to print. This Cast LCD UV-Curing resin is very easy to use and dye, and is a castable resin for jewelers and small metal parts..
  • Wide Applications - Cast by Siraya Tech was developed as an affordable castable 3D printer resin by jewelers for making rings and pendants, by engineers for small metal func....
Check Stock

How to Build a Backyard Brick Oven from Scratch

  • UNPARALLELED PERFORMANCE: CBO Ovens 1) hold heat longer 2) heat faster 3) can cook in excess of 1000°. All thanks to a proprietary blend of commercial grade refractory cement..
  • REMARKABLE FLAVORS: Anything cooked on a grill or in a conventional oven can be prepared in a wood-burning oven. The difference? Everything tastes better when it’s wood-fired..
  • ENDLESS MENU POSSIBILITIES: Signature FlameRoll generates high, even temperatures, allowing you to fire up anything including grilled meats, roasted vegetables, bubbling cheeses, flaky pizza crusts, and more..
  • MADE IN THE USA: High-performance outdoor pizza ovens sourced and made in the USA to ensure safe and reliable year-round cooking..
  • CERTIFIED: For Residential & Commercial Indoor or Outdoor use. Conforms to UL Subject 2162, NSF/ANSI STD 4 and are certified to ULC STD S627..
Check Stock

HearthSense Ventless Dual Fuel Gas Log Set - 24 in, 32,000 BTU, T-Stat Control - Model# VFL24T, Brown

  • TECHNOLOGY – Maximum 32,000 BTU Patented dual fuel Technology Which Heats up to 1,200 sq. ft. Area.
  • DEPENDABLE – Thermostat control allows you to keep a constant room temperature, without the hassle of a manual adjustment.
  • STYLISH - Hand-painted, cement log set made of superior refractory ceramics to ensure a long lifespan.
  • ECONOMICAL- To operate as a vented product you must always operate the log set with the chimney flue damper open and You must install the damper clamp (included). This will insure vented operation..
  • SAFE- 100% carbon monoxide and oxygen depletion safe, safety pilot light and oxygen depletion sensor included..
Check Stock