Categories

Best Castellated Locknuts

Performance Tool W89314 1/2-Inch Drive Wheel Bearing Lock Nut Socket Set 7-Piece

  • Hex Locknuts Sizes Contains One Each: 2-3/8", 2-1/2" and 55mm.
  • Rounded Locknuts Contains One Each: 2-1/2", 2-3/4", 2-9/16" and 2-3/8".
Check Stock

ARRMA Steel 57T Slipper Set 0.8Mod ARA310948

  • Arrma ARA310948 - Steel 0.8Mod Slipper Set, 57T.
  • Features: Precision manufactured aluminum slipper hubs High strength 57T 0.8 module steel spur gear for maximum power handling capability Castellated....
  • Includes: (1) Assembled Slipper Clutch with Steel Spur Gear.
  • Part number(s) included (in factory packaging): ARA310948.
Check Stock

ARRMA Slipper Clutch Maintenance Set ARAC9103

  • ARRMA ARA311034 - HD Slipper Set, 0.8Mod, 57T.
  • Features: Precision manufactured aluminum slipper hubs Durable composite 57T 0.8 module spur gear for reliable power handling capability Castellated....
  • Includes: (1) Assembled Slipper Clutch with Composite Spur Gear.
  • Part number(s) included (in factory packaging): ARA311034.
Check Stock

EZ-FLO 40079 Touch Flush Valve for Eljer Toilets White

  • WRENCH WIDTH: about 8cm 3.15 inch. Lever length: about 21 cm 8.3inch This Modern metal lever wrench will help your toiletcan add a new stylish touch....
  • DURABLE MATERIAL: Metal Plating Wrench + Copper Lever This is highly durable handle arm construction. It features a copper finish handle with Metal....
  • EASY INSTALLATION: Side Mount Toilet Lever Handle, suitable for TOTO Kohler Toilet Tankhe sturdy handle is durable construction and easy to install.....
  • FUNCTIONAL HARDWARE: This Side Mount Toilet Lever Handle is suitable for Square mounting holes,flush lever locknuts have a reversed screw thread,....
  • FUNCTIONAL FOR HOMEUSE: This Side Mount Toilet Lever Handle is suitable for Square mounting holes,flush lever locknuts have a reversed screw thread,....
Check Stock

Extra Thick Seat Cushion for Office Chair Wheelchair Memory Foam Comfort Chair Pad Dual Layers Coccyx Gaming Pillow Sciatica Back Pain Relief Hip Tailbone Pressure Relief Antislip Cushions

  • EXTRA THICK & LARGE SIZE – The Liffis large seat cushion is designed for thicker and more width to provide comfort and pain relief for your sitting experiences. Liffis dual-layer foam seat cushion is thicker than a similar seat cushion..
  • BACK PAIN & SCIATICA RELIEF - The castellated structure of the memory foam top layer perfectly distributes the pressure when you sit, plus the ergonomic curve fitting to your body, the orthopedic seat cushion will relieve your pains in Back, Hips, Sciatica, and further improve your sitting posture..
  • CREATIVE DUAL LAYERS FOAM DESIGN - Dual layers seat cushion combines comfort and support. A gel-infused castellated comfy memory foam top layer with a supportive high elastic foam base layer, provides both comfort and support. With this one specially structured creative new seat cushion, you'll say goodbye to other cushions which is either too hard or too soft..
  • NOTICE: SLAP ON BOTH SURFACES OF THE CUSHION AFTER UNPACKED AND IT CAN TAKE AS SOON AS 4 HOURS TO REBOUND TO ITS ORIGINAL SIZE AND SHAPE..
  • EASY TO CARRY & MAINTENANCE - With the padded handle, it'll be very convenient for you to carry this seat cushion everywhere and every occasion, office chair, desk chair, wheelchair, truck seat etc. The removable outer cover....
Check Stock

Water Wonders Slatetech Rio Grande Falls with Copper Vein Trim

  • Safe White 18V LED lighting with touch Remote control for dimming creates an even wash of lighting without hot spots.
  • Certified simple 5 step setup will have you enjoying your fountain in no time. Modular pieces makes assembly easy. Suitable for indoor use Only.
  • Our proprietary castellated water distribution system insures even, full surface coverage without adjustments.
  • Ships with submersible pump, flow adjustable valve, and decorative polished river rocks.
  • The sturdy removable rock tray lifts right out of the one piece welded reservoir for service when needed.
Check Stock

Canopy Kit for Chandelier, 5 1/8 Ceiling Lighting Modern Steel Canopy Kit Light Fixture Cover Plate, Hook & Cord Holder for Pendant Lighting Fixtures (Brushed Nickel )

  • Canopy size 5-1/8"x 1" includes wire clasp and hook.
  • two pendants use options, you can choose to use rope, or chain are designed in 25 lbs..
  • 5-1/8"Canopy kit can be used in DIY pendant lights, chandeliers, ceiling lighting and Wall Lights replacements or updates to canopies..
  • Design: 5-1/8"Canopy can cover most Ceiling Outlets.
  • Metal Cord Holder, the current popular cord light standard.
  • Hook can directly hang chain light or other..
  • Get a new replacement with any quality problem, 24 hours online service..
Check Stock

Chain Link Fence Gate Wheel for Metal Tube Swing Gate - 6' Hot Galvanized Heavy Duty Gate Wheels for Cattle Fence Gate, Tooltriz

  • 【High support weight】An actual high-strength fence gate wheel with the capacity of 550 pounds. The wheel's width and curved rim make it adaptable to all kinds of roads, gravel road, dirt road, and cement road..
  • 【Good structure】The tire is real solid rubber with good elasticity and quiet function. Bearings are standard ball bearings, bearing capacity and service life are much higher than other bearings..
  • 【Hot-dip galvanized thick frame】The wheel frame adopts new technology, high strength, and hot-dip galvanized.
  • longer rust prevention time. In addition, the steel plate is more thikcer than ordinary products..
  • 【Standardized chain link fence parts】After a few years, it is easy to buy and find accessories if the bearing or wheel is damaged, save you money..
  • 【Stainless steel bolts with locknuts】This gate wheel adopts Stainless steel bolts and stainless steel locknuts. Therefore, there will not happen the gate wheel can't disassemble because of rust..
Check Stock

Canomo Silver Finish Make-A-Lamp Kit 3-Way with 8 Inch Harp, 2 Pieces 12" Lamp Pipe, and All Parts Needed and Instructions for DIY Lamp Design or Repair…

  • Include a 3-Way turn knob socket, 8 inch silver detachable harp, 8 foot UL listed clear cord set, finial, lamp pipe kit and all hardware. Includes instructions for wiring..
  • Silver finish socket has optional side hole in bottom cap in case you cannot run wire through your lamp base..
  • Contains two each: 1/8-IP x 12″ threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
  • Great for DIY projects and for repair and replacement of broken, tarnished or silver lamp parts..
  • Create a custom lamp with your own lamp base or re-wire a lamp with our new parts kit..
Check Stock

Canomo Antique Brass Finish Make-A-Lamp Kit 3-Way with 8 Inch Lamp Harp, 2 Pieces 12" Lamp Pipe, and All Parts Needed and Instructions for DIY Lamp Design or Repair

  • Contains two each: 1/8-IP x 12″ threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
  • Great for DIY projects and for repair and replacement of broken, tarnished or lamp parts..
  • Antique brass finish socket has optional side hole in bottom cap in case you cannot run wire through your lamp base..
  • Create a custom lamp with your own lamp base or re-wire a lamp with our new parts kit..
  • Include a 3-Way turn knob socket, 8 inch antique brass detachable harp, 8 foot UL listed clear cord set, finial, lamp pipe kit and all hardware. Includes instructions for wiring..
Check Stock

Canomo 2 Sets Lamp Making Kit Lamp Wiring Kit with 8 Inch Harp, 2 Pieces 12\ Lamp Pipe, and All Parts Needed and Instructions for DIY Lamp Design or Repair, Black

  • Package Include 2 Packs: 3-Way turn knob socket, 8 inch black detachable harp, 8 foot UL listed blak cord set, finial, lamp pipe kit and all hardware. Includes instructions for wiring..
  • Three-Way Socket Lamp Making/Repair Kit is made of high-quality metal which ensures premium quality and a classic look. The Lamp Kit is UL and CUL safety rated for Indoor location use.
  • Create a custom lamp with your own lamp base or re-wire a lamp with our new parts kit..
  • Contains two each: 1/8-IP x 12" threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
  • Great for DIY your own lamp and for repair and replacement of broken, tarnished or lamp parts..
Check Stock

Canomo Black Finish Make Lamp Kit Lamp Lighting kit 3-Way with 8 Inch Harp, 2 Pieces 12\ Lamp Pipe, and All Parts Needed and Instructions for DIY Lamp Design or Repair

  • Package Include a 3-Way turn knob socket, 8 inch black detachable harp, 8 foot UL listed black cord set, finial, lamp pipe kit and all hardware. Includes instructions for wiring..
  • Three-Way Socket Lamp Making/Repair Kit is made of high-quality metal which ensures premium quality and a classic look. The Lamp Kit is UL and CUL safety rated for Indoor location use.
  • Create a custom lamp with your own lamp base or re-wire a lamp with our new parts kit..
  • Contains two each: 1/8-IP x 12" threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
  • Great for DIY your own lamp and for repair and replacement of broken, tarnished or lamp parts..
Check Stock

RC Car Time: Journal With Remote Controlled Car I 110 Pages I lined I 6×9″

  • READY-TO-RUN: Perfect RC truck for beginners, built for exciting bashing speeds and extreme, all-terrain durability..
  • DESIGNED TOUGH: New features to enhance its unstoppable performance include a stronger chassis and retained hinge pin plates.
  • a castellated slipper pad and sliding gear mesh.
  • and rubber shielded bearings throughout..
  • ADJUSTABLE: Ride height and body mounts for easy component access and maintenance.
  • SUPERIOR PERFORMANCE: This monster RC truck delivers a thrilling combination of ARRMA toughness, street truck style and 50+ mph speed capability..
  • INCLUDES: Ready to Run (RTR) completion level is fully assembled and includes everything needed besides batteries and a charger..
  • NEWLY UPDATED: With a Spektrum SLT3 radio, Firma brushless motor, tougher chassis, wider stance, stronger steering servo and more..
Check Stock