Best Caster camber Plates

YLDEE Magnetic Camber Caster and King Pin Gauge (Red)

  • Robust magnetic gauge mounts onto wheel/hub for quick accurate measurement of camber,castor angle kingpin inclination.
  • Camber gauge with fixed graduation from +5 to -5.
  • Adjustable caster gauge graduated +11 to -3.
  • Kingpin gauge graduated from 0 to 14 left to right.
  • Very solid, well made. Magnets are very strong, reliable and accurate! Suitable for vehicles fitted with steel wheels. To be used in conjunction with steering turntables and rear wheel level plates..
  • Supplied in tough composite carry-case. Suitable case with enough padding will protect the Camber Castor Gauge very well..
Check Stock

Longacre® 52-78298 Digital C/C Gauge, AccuLevel/QuickSet

  • Be confident with your setup - here's an ultra accurate digital caster / camber gauge that reads to .1º (1/10º) camber and caster as high as needed.
  • Perfect for large wheels - comes with a Longacre quick set large wheel adapter, suitable for 13" to 24" aluminum wheels.
  • The AccuLevel digital readout can be easily removed and used for other angle measurements on the car, such as suspension and driveline.
  • Built-to-last, the Longacre digital caster camber gauge is made of strong CNC machined billet aluminum and comes with a hard carrying case.
  • Adjusting camber can have a dramatic effect on the cornering of your car - optimum camber settings will result in more speed and ideal tire wear.
Check Stock

Caster Camber Tool, Wheel Camber Gauge, DECO Magnetic Caster Camber Gauge Suspension Tool, Aluminum Magnetic Camber Adjustment Tool, Wheel Alignment Tool

  • This DECO caster/camber gauge allows you to take precision caster and camber readings quickly, easily, and accurately.
  • Measures +8° to -4° caster range and +6° to -6° camber range.
  • The gauge is machined at 20 degrees on both ends for easy and accurate caster settings.
  • Anodized purple with laser-etched markings for easy readings.
  • Equipped with a magnetic adapter which woks for many rear wheel drive vehicles with cast iron front hubs or rotors.
Check Stock

Longacre® Racing 79501 Aluminum Toe-In Plates w/Magnets

  • These plates are the quickest and simplest way to check toe-in - any contact with other cars or retaining walls is likely to change the toe setting.
  • Easy to use - rest one of these plates against the tire on each side and measure toe directly using the 2 tape measures (included).
  • Get the most accurate reading - always remember to turn wheels so they are facing straight ahead on level ground and set caster and camber first.
  • The Longacre toe-in plates formed design is rigid for accuracy and stays put against the tire while the magnets hold the tape in place.
  • The dimensions of the Longacre toe-in plates are 23-1/2" x 9" and are sold as a pair with two 3/4" tapes that feature 1/32" increments.
Check Stock

Toolwiz Universal Adjustable Magnetic Gauge Tool Camber Castor Strut Wheel Alignment Tools for Car Truck RV Tire Repair Caster Alignment Castor Wheel Gauge Camber Alignment Tools Camber Gauge

  • Universal automotive tool for wheel alignment, caster camber gauge compatible with BMW, Benz, Chevrolet, Toyota, Honda, Jeep, Citroen..
  • This Wheel Alignment Balancing Tools allows you to return the strut to the original camber position after dismantling and re-assembling the suspension....
  • The alignment gauge is suitable for accurate checking of the castor and camber angle. Measures the camber and caster angle on the wheel hub or brake....
  • With it's strong magnetic attraction, the camber alignment tool can easily attached on all kind metal surfaces..
  • Alignment tools automotive: Easy to read through accurate scale with range of measurement from -5 up to +5 degrees. You can ask seller for sending....
Check Stock

KAKO Adjustable Magnetic Gauge Tool,Camber Castor Strut Wheel Alignment Tool for Car/Truck Camber/Castor Strut Wheel Alignment and Tire Repair

  • Accurate Measurement Wheel Alignment-This adjustable gauge allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing. Measures the Camber and Caster angle on the wheel hub or brake disc..
  • Professional Tools-Professional adjustable magnetic gauge tool measures the Camber and Caster angle on the wheel hub or brake disc, suitable for automobile cars motorcycles trucks vans SUV tire repair..
  • Easy to use-it has a powerful magnet could be easily mounted on all kinds of metal surface,easy to use.(Note:Please double check and make sure the panel is balance before using.You could screw the button behind the gauge to adjust panel level)..
  • This adjustable magnetic gauge tool also it could be used as a normal gradienter (Magnetic mount could be released),It has a simple leveling adjustment from -5 degrees to 5 degrees.The body of gauge is made of high density aluminum and precision level vial..
  • Satisfaction guaranteed! Try any product we sell for a full 30 days. If not completel....
Check Stock

VEVOR Wheel Alignment Tool, Toe Plates without Probes, Aluminum Alloy Toe Alignment Plates, Double 16ft Tape Measures Alignment Tools Automotive, Wheel Alignment Tool Gauge Camber Caster

  • HIGH FUNCTIONALITY: High-performance wheel alignment tool measures the toe-in, toe-out, tire camber, and calculates the caster using wheel rotation and horizontal offset. These toe plates can help you to adjust your car better..
  • DURABLE STRUCTURE: Toe alignment plates are made of aluminum alloy, which is not easy to bend or deform. The strudy structure will provide you with long-term service..
  • STAND OFF WHEELS: Our toe alignment tool is different from most products on the market. Two triangular aluminum holders are welded under each aluminum plate, allow our aluminum plates to stand upright by themselves. In addition, you can paste non-slip rubber strips under the aluminum plate to make alignment plates stand more stable..
  • MASTERFUL SLOTS: Masterful cut slots can directly clamp the tape measure head. No extra magnetic stripe is needed, not easy to fall, very convenient for one person to operate..
  • UNRESTRICTED USE: Two plates can be fixed together with the buckle on the tape measure. The recessed design in the middle is very convenient to carry. It is suitable for most family cars and SUVs. If you have a lifted/4x4 vehicle with larger than stock offroad tires, the tire sidewall will likely be too tall for these to work..
Check Stock

VEVOR Wheel Alignment Tool, 4 Probes Toe Plates, Double 16 ft Measure Tapes, Stands Off Alignment Tools Automotive, Aluminum Alloy Toe Alignment Tool, Wheel Alignment Tool for Camber Caster

  • High Functionality: High-performance wheel alignment tool measures the toe-in, toe-out, tire camber, and calculates the caster using wheel rotation and horizontal offset. These toe plates can help you to adjust your car better..
  • Durable Structure: Toe alignment plates are made of aluminum alloy, which is not easy to bend or deform. The strudy structure will provide you with long-term service..
  • Stand off Wheels: Our toe alignment tool is different from most products on the market. Two triangular aluminum holders are welded under each aluminum plate, allow our aluminum plates to stand upright by themselves. In addition, you can paste non-slip rubber strips under the aluminum plate to make alignment plates stand more stable..
  • Masterful Slots: Masterful cut slots can directly clamp the tape measure head. No extra magnetic stripe is needed, not easy to fall, very convenient for one person to operate..
  • Unrestricted Use: Two plates can be fixed together with the buckle on the tape measure. The recessed design in the middle is very convenient to carry. It is suitable for most family cars and SUVs. If you have a lifted/4x4 vehicle with larger than stock offroad tires, the tire sidewall will likely be too tall for these to work..
Check Stock

VEVOR Wheel Alignment Tool, 6 Probes Toe Plates, LED Toe Alignment Plates, Double 16Ft Tape Measures Alignment Tools Automotive, Charging Toe Alignment Tool, Wheel Alignment Tool Gauge Camber Caster

  • High Functionality: High-performance wheel alignment tool measures the toe-in, toe-out, tire camber, and calculates the caster using wheel rotation and horizontal offset. These toe plates can help you to adjust your car better..
  • Durable Structure: Toe alignment plates are made of aluminum alloy, which is not easy to bend or deform and provides long-term service. Wheel alignment plates are equipped with 6 probe feet to facilitate your measurement. The 0.1-precision digital screen displays the data you want..
  • Stand off Wheels: Our toe alignment tool is different from most products on the market. Two triangular aluminum holders are welded under each aluminum plate, allows each of our aluminum plates to stand upright by themselves. In addition, you can paste non-slip rubber strips under the aluminum plate to make alignment plates stand more stable..
  • Slots and Magnets: Masterful cut slots can directly clamp the tape measure head, not easy to fall. In addition, magnetic strips are provided, which you can paste on the slot to fix the tape measure head firmly..
  • Unrestricted Use: Two plates can be fixed together with the buckle on the tape measure. The recessed design in the middle is very convenient to carry. It is suitable for most family cars and SUVs. If you ....
Check Stock

VEVOR Wheel Alignment Tool, 6 Probes Toe Plates, LED Toe Alignment Plates, Double 16Ft Tape Measures Alignment Tools Automotive, Charging Toe Alignment Tool, Wheel Alignment Tool Gauge Camber Caster

  • High Functionality: High-performance wheel alignment tool measures the toe-in, toe-out, tire camber, and calculates the caster using wheel rotation and horizontal offset. These toe plates can help you to adjust your car better..
  • Durable Structure: Toe alignment plates are made of aluminum alloy, which is not easy to bend or deform and provides long-term service. Wheel alignment plates are equipped with 6 probe feet to facilitate your measurement. The 0.1-precision digital screen displays the data you want..
  • Stand Off Wheels: Our toe alignment tool is different from most products on the market. Two triangular aluminum holders are welded under each aluminum plate, allows each of our aluminum plates to stand upright by themselves. In addition, you can paste non-slip rubber strips under the aluminum plate to make alignment plates stand more stable..
  • Slots and Magnets: Masterful cut slots can directly clamp the tape measure head, not easy to fall. In addition, magnetic strips are provided, which you can paste on the slot to fix the tape measure head firmly..
Check Stock

YXGOOD Universal Magnetic Gauge Tool for Car Truck Adjustable Camber Castor Strut Wheel Alignment

  • 【Accurate Measurement】Measures the Camber and Caster angle on the wheel hub or brake disc. Attach the magnetic gauge to the hub or disc brake,suitable for accurate checking of the castor and camber angle Wheel Alignment tool"..
  • 【Adjustable Gauge】Allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing..
  • 【Multi-Function】The magnetic gauge tool has a powerful magnet it can easily attached on all kind metal surfaces.Also it could be used as a normal gradienter.(Note:Please double check and make sure the panel is balance before using.You could screw the button behind the gauge to adjust panel level).
  • 【Easy To Read】Size: 4.5’’*1.2’’*0.8’’,it has a simple leveling adjustment from -5 degrees to 5 degrees.Body of gauge is made of high density aluminum and precision level vial,high strength plasticity..
  • 【Professional Tools】Allows adjustment to maintain correct wheel alignment and even tyre wear.Suitable for automobile cars motorcycles trucks vans SUV tire repair..
Check Stock

Black Chassis Bundle for Traxxas Slash/Raptor 2WD, Convert a Stampede, Rustler or Bandit to a Short Course SCT Truck, Custom Build a Drag Car, Dirt Oval Racer, Sand Buggy, or Monster Truck 5822

  • Stock Chassis kit for Traxxas 2WD Slash or Raptor.
  • Includes everything seen in pictures - 2WD Slash bumpers, chassis, skid plates, nerf bars, battery hold down, steering linkage, camber links, fiberglass tie bar, suspension arms, steering arms, caster blocks, shock towers, screws, owner’s manual, parts list, and tools.
  • Start a custom build – Drag Slash, Sand Buggy, Monster Truck or Dirt Oval Racer.
  • Parts needed to complete the build are - transmission, drive shafts, bearings, hubs, tires, body mounts, body, and electronics.
  • Part numbers included – 5822A, 5837, 5835, 5823, 3745, 3638, 3639, 2555, 3631, 2578, 2640, 3644, 5836, 5827 and more.
Check Stock

Yonaka Compatible with Honda Accord 2013-2017 Spec 2 Full Coilovers Suspension Shocks Springs Struts

  • Fully threaded dual tube advanced shock absorber.
  • Adjustable camber plates (3 degrees camber adjustment).
Check Stock