Categories

Best Casting Alloys

Mold Star 15 SLOW - 1A:1B Mix By Volume Platinum Silicone Rubber - Pint Unit

  • Tear Resistant - Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage *Packaging may vary*.
  • Heat Resistant - Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys.
  • Curing - Allow Mold Star 15 SLOW silicone rubber to cure for 4 hours at room temperature (73°F/23°C) before demolding..
  • Vacuum Degassing - Although not necessary, vacuum degassing helps eliminate any entrapped air in pourable silicone rubber.
  • Mold Performance - The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment.
Check Stock

2.2 Lbs Delft Clay Replacement Casting Sand Gold Silver Pewter Jewelry Casting

  • The Delft Clay is a highly-refined casting sand.
  • Provides sharp, high-detailed castings in gold, silver, pewter, copper-based alloys, and more.
Check Stock

4.4 Lbs Delft Clay Replacement Casting Sand Gold Silver Pewter Jewelry Casting

  • The Delft Clay is a highly-refined casting sand.
  • Provides sharp, high-detailed castings in gold, silver, pewter, copper-based alloys, and more.
Check Stock

Smooth-Sil 940 Food Grade Mold Making Silicone Rubber - Trial Unit

  • Suitable for Food Grade applications (See Technical Bulletin) – Great for making baking molds and trays, ice trays, casting butter, chocolate, fondant and other applications used to produce foods..
  • Also can be used for general mold making. Materials such as plasters, concrete, wax, low-melt metal alloys or resins (urethane, epoxy or polyester) can be poured into it..
  • Pot Life: 30 minutes – Cure Time: 24 hours.
  • Mix Ratio: 100A:10B by weight (requires digital gram scale).
Check Stock

Naroote Portable Solder Pot, 180W/220V Electric Melting Tin Furnace Tin Solder Pot Melting Solder Pot Tin Melting Pot with Temperature Control Lead Melting Pot

  • WHY SHOULD I USE A HOT POT 2? The Hot Pot 2 was designed to make lead casting a whole lot easier. It melts lead quickly and can process over 20 pounds per hour. The Hot Pot 2 runs off of electricity.
  • MELTS LOW-TEMPERATURE ALLOYS – The Hot Pot 2 is capable of melting all low-temperature alloys such as lead, tin, and so many more.
  • PERFECT FOR SINKERS & BULLETS – The Hot Pot 2 works great for melting lead for sinker and bullet molds. Is has pouring spouts on either side to make it easier to pour into the molds small holes.
  • EASY TO USE – Designed to be easy to use, the Hot Pot 2 is great for hobbyists. As with any equipment that heats up, always ensure that proper safety precautions are taken and clothing is worn.
  • MADE IN THE USA – All Hot Pot 2 melting pots are made in the USA using local materials and labor. This is quality that will last a lifetime.
Check Stock

Captain America 20 inch Metal Shield Cosplay Shield Original Version 1

  • ✪Full-size replica made of aviation aluminum, high-quality finishes and details, with iconic red, white and blue patterns, leather straps, precise....
  • ✪Aerospace aluminum alloy is the leader among aluminum alloys, with high strength and excellent resistance to peeling corrosion, and is usually used....
  • ✪The protective cover is made by die-casting process, which completely exceeds the stamping process on the market. Has die-caster. The protective....
  • ✪The diameter is 20 inches, which can be compared with 1: 1 measurement. The handle is made of leather material, which is comfortable to wear，It....
  • ✪After-sales service guarantee: If there is damage during transportation, or if you are dissatisfied with our products, please contact us as soon as....
Check Stock

TIG Welding Tungsten Electrodes 2% Lanthanated Blue WL20 10-Pack 1/16

  • PERFECT for welding aluminum alloys, magnesium alloys, nickel alloys, copper alloys, titanium alloys, low-alloyed steels, and stainless steel.
Check Stock

Jetech Heavy Duty Pistol Grip Grease Gun - 6000 PSI - 14oz Cartridge,Includes 6-Inch Rigid Extension and 2 Couplers

  • Wide Application - Pistol grip grease gun's large capacity: 14oz Cartridge. Working Pressure: 3600 PSI, Max Pressure: 6000 PSI. Widely used to lubricate equipment such as vessels, reapers, excavators, and other heavy equipment..
  • Leakage-free design - The heavt duty grease gun 's oil nozzle adds steel balls to avoid backflow during use. The self-locking device makes it safe and convenient to operate..
  • Study Material - Strong and durable aluminum die-casting alloys grease gun head. Heat-treated high strength inside spring to ensure long-lasting balanced pressure..
  • EFFORT-SAVING DESIGN - The dual-piston design achieves higher efficiency with less effort needed. Ergonomic anti-slip TPR handle offers a comfy grip..
  • LIMITED LIFETIME WARRANTY - Buy with confidence with Jetech's lifetime manufacturer warranty. Terms and conditions apply. The lever-action grease gun with dual piston is guaranteed for 3 months..
Check Stock

Midwest Tungsten Service TIG Welding Tungsten Electrodes 10-Pack Blue - 2% Lanthanated Tungsten WL20/EWLa-2 3/32

  • PREMIUM ten (10) pack of 3/32" tungsten electrodes for TIG welding for the beginner, intermediate, and professional TIG welder. From students to industrial and artistic users, these fit your use.
  • HIGHEST RATED and most reviewed 2% Lanthanated Tungsten TIG electrodes on Amazon ready to help you make the perfect weld. Noted for their reliability and consistent performance..
  • EXCEPTIONAL for both AC & DC applications and for welding aluminum alloys, magnesium alloys, nickel alloys, copper alloys, titanium alloys, low-alloyed steels, and non-corroding steels.
  • UNITED STATES based manufacturing & knowledgeable customer service staff are here to help you pick the perfect TIG tungsten for your welding job, large or small..
  • FREE materials safety data sheet (MSDS) and certificate of conformance linked below, the tungsten electrodes adhere to American Welding Society standard A5.12M/A5.12:2036.
Check Stock

Tungsten Electrodes for Tig Welding 2% Grey Ceriated Tungsten Assorted- 5PCS 3/32 + 5PCS 1/16

  • Premium 10PK tig welding tungsten electrodes 2% ceriated gray WC20/EWCe-2, 5PCS 1/16" & 5pk 3/32" ceriated tungsten electrodes for tig welding.
  • The ceriated tungsten tig electrode is with high performance: No spitting,stable consistent arc starts and good stability with low burn-off rate..
  • The 2% ceriated tungsten electrode perform reliably and consistently even in high current range on AC&DC applications for welding copper alloys, nickel alloys, titanium alloys,low-alloyed steels,magnesium alloys and aluminum alloys.
  • The tungsten electrodes adhere to American Welding Society AWS standards,great for beginner to professional tig welder for tig welding works.
  • Package including: 5PCS 1/16" & 5PCS 3/32" by 7"length 2% grey ceriated tungsten, Tungsten Electrode Size: 3/32" x 7"(2.4mm x 175mm )AND 1/16" x 7"(1.6mm x 175mm).Warm tips:We'll send the tungsten electrodes with old and new package at random. We guarantee with the same high quality.
Check Stock

POWLAB Rivet Gun Adapter,Electric Rivet Gun Head,Cordless Riveting Gun Drill Tool Aluminum Alloy Adapter Accessories,Removable Plastic Handle,1 Drill,4 x Rivet Head,200 Blind Rivets

  • Multiple sizes: 4 threaded heads are available for replacement, 2.4mm, 3.2mm, 4.0mm, 4.8mm..
  • Material: This rivet gun adapter tool is made of Alloy steel forged pipe head for durability.
  • The aluminum casting housing will give you a comfortable grip, light weight and easy to carry, and you will not get tired of working for a long time.
  • The handle is made of hard plastic, which pulls the rivet quickly and is not easy to slip..
  • Widely application: Apply for doors and windows, riveting of aluminum alloys, electrical air conditioners, automobile manufacturing and production, etc..
  • Easy to install: Connecting rod, to connect to the electric gun drill for quick conversion to electric rivet guns..
  • Tip: If you have any question, please feel free to contact us for a full refund or a replacement..
Check Stock

3mirrors ALUMINUM Tungsten Electrode Sharpener Grinder Head TIG Welding Tool with Cut-Off Slot Multi-Angle & Offsets, 5X 25mm Double Diamond Wheels, 1X Connecting Rod

  • Premium 10PK purple rare earth blend (EWG) tig welding tungsten electrodes , 5pk 1/16" & 5pk 3/32" purple tungsten electrodes for tig welding.
  • The purple tungsten tig electrode is with great welding performance: non radioactive, reliable arc-striking, low burn-off rate and good stability with low burn-off rate..
  • The rare earth blend tungsten electrode perform reliably and consistently even in high current range on AC&DC applications for welding copper alloys, nickel alloys, titanium alloys,low-alloyed steels,magnesium alloys and aluminum alloys.
  • The tungsten electrodes adhere to American Welding Society AWS standards,great for beginner to professional tig welder for tig welding works.
  • Package including: 5PCS 1/16" & 5PCS 3/32" by 7"length rare earth blend (EWG) tungsten, Tungsten Electrode Size: 3/32" x 7"(2.4mm x 175mm )AND 1/16" x 7"(1.6mm x 175mm).Warm tips:We'll send the tungsten electrodes with old and new package at random. We guarantee with the same high quality.
Check Stock

DocaDisc 30PC - 2 inch Roloc Sanding Disc Mixed Pack // Surface Conditioning Discs // Roloc Disc/Air Grinder Disc for Surface prep, Paint Stripping, Grinding & Finishing (Course/Medium/Fine)

  • ... enables aggressive cutting and fast, seamless disc changing to ensure project continuity and consistent finishing.
  • WIDE APPLICATIONS for use on stainless steel, alloys, non-ferrous materials, plastics, and fiberglass.
  • useful for auto body and automotive work, such as rotor finishing, and on motorcycles, boats, die casting parts, bicycle parts, machinery, knives, and many other items.
Check Stock