Categories

Best Casting Handwheel

4 13/16\ Lg., Malleable Iron, Straight, Crank Handle (1 Each)

  • Made of premium material for a long time and durable, pratcial use..
  • The revolving handle is simple design, easy to install and use..
  • Revolving handwheel machine handle is simple design, but very practical in use, giving you a good using experience..
  • Perfect for printing, woodworking, machinery, food, packaging equipment, hardwares tools..
  • With smooth surface and nice polished, the revolving handwheel machine handle is neat and generous, so dont need to worry about harming your hand..
Check Stock

awagas 8\ x 8\ Lab Scissor Jack, 200mm Stainless Steel Laboratory Lifting Platform Lab Lift Table Lab Jack Stand Rack Scissor Lab-Lift Lifter, Height Range from 85mm to 280mm Load Capacity 15Kg

  • ...se plate 200*200mm. The maximum load capacity is 15KG..
  • ❥【NOTE】100% brand new. There is a protective film on the surface of the product, PLEASE peel off the protective film before use! The protective film of the product may be warped or burrs, but it does not mean that the product has been used. Tightening the handwheel helps to maintain stability. But pay attention to the rotation force, and avoid excessive force causing the handwheel to be unable to tighten..
  • ❥【DURABLE AND ANTI-CORROSION MATERIAL】Lab lifting platform is made of sturdy and high-quality stainless steel material, anti-rust and corrosion resistant, strong and durable. Stainless steel top and bottom plate is NOT magnetic, galvanized iron stand is magnetic. The platform is flat, and the edge is not sharp..
  • ❥【STEADY HEIGHT ADJUSTMENT】Stainless steel laboratory scissor jack has a very firm and steady base and a stable structure, which makes the lifting very steady and not easy to shake! The lab lifting platform is composed of an upper panel, a lower base plate, a rotating shaft, and a handwheel. Place the lifting platform steadily, and rotate the handwheel to adjust the upper panel of the lifting platform to the desired height..
  • ❥【WIDE RANGE OF USES】The laboratory lifti....
Check Stock

Masmoc 4\ Metal Handwheel Fit 1/2\ Shaft of Table Saw Drill Press Lathe Turning CNC, Round Hand Wheel Crank Come with Set Screws and Disassemble Handle

  • This handwheel is designed with consumer convenience in mind,the item provides everything you all need including 4pcs SET SCREWS (2PCS is the backup one) and installing hex key wrench. Insert the shaft into the hole in the handle hub and tighten the provided set screw and a solid construction immediately is finished.It doesn't matter if the shaft is star, key-way, hexagonal, or smaller than 1/2”.
  • Handwheel Total Diameter: 100 mm / 4 inch, Center Bore Diameter (approx.): 12 mm / 1/2 inch. The package comes with 1 pcs round handwheel, 1pcs handle,4PCS SET SCREWS, 1pcs hex key wrench.
  • The hand crank wheel is made of metal material and the handle is made of high quality phenolic resin, with strong insulation and durability.
  • Masmoc handwheels is fit for 1/2” or smaller shaft but it can be expanded to expand the scope of use.
  • Widely used in industrial machine tools, such as Universal or horizontal - handle crank wheel on CNC milling machine bed.Universal or horizontal - handle crank wheel on CNC milling machine bed,Surface rotary Grinder Machine, Cylindical grinder, sharing machine,Boring machine, profile cutting machine, Turning CNC,Table saw, Band saw, Radial arm saw, Contractor saw, Cabinet Saw.
Check Stock

Mr. Heater Handwheel

  • ALUMINUM ALLOY MATERIAL: This handle is made of high quality aluminum alloy, which is thick and durable. The handle can bear the pressure of hand pressing and not easy to be worn out..
  • EASY TO STORAGE: This black hand wheel is easy to fold and store without taking up too much space. The handle is made of reinforced nylon, which is more antiskid..
  • CONFORTABLE TO USE: The surface of hand wheel is smooth and comfortable. This foldable handwheel can bring you a better work experience, let you work more comfortable..
  • CONVENIENT OPERATION: This aluminum alloy hand wheel shank has smooth surface, flexible rotation and convenient operation. This hand-wheel is mainly used for processing cutting tools..
  • NICE HANDWHEEL: A good accessory to replace your old or bad hand-wheel, let you get rid of the trouble of machine parts difficult to use..
Check Stock

Upgraded Mini Lathe 7\X14\

  • ...iron with a powerful lathe motor:550W. High grade iron construction makes it more sturdy during turning, drilling, threading and cutting processing.Two rails provides smooth and durable moving..
  • 【NEW UPGRADE DESIGN】-This upgrade mini lathe uses metal gear instead a nylon one,increase service life.Adopts aluminum handwheel is more durable than plastic handwheel,and not easy to be damaged.Digital display screen is convenient for you to follow up the processing.Add automatic power-off protection switch to make the operation safer.An extra lamp can help you finish processing in places with insufficient light.We provide one extra gear belt and free 7PCS lathe carbide tool..
  • 【PRECISION DESIGN】-Power metal lathes has large center distance 350mm(13.78") and swing over bed:180mm (7.09"),spindle bore: 21mm(0.82"). A accurate self-centering 3-jaw is supplied,for holding a variety of round or square cylindrical materials stability.The metal lathe features forward and reverse design. The variable speed of MT4 Spindle range 0-2500RPM, two speeds are available for meet your different metal workings: Low Speed 0-1250RPM, High Speed 100-2250 RPM..
  • 【PROFESSIONAL COMPOUND REST】-4-way quick change tool post  can install 4 common turning tools at the same time.....
Check Stock

Yosoo Health Gear 6 Terminal CNC Pulse Encoder, Electronic Hand Wheel Manual Pulse Generator Encoder, 5V 60MM(White)

  • [6 terminal]: This CNC electronic handwheel has 6terminal, and the diameter is 60mm/2.36in.
  • [Material]: Made of high grade metal and plastic, this electronic handwheel is durable in use and easy to install.
  • [High Performance]: High reliability, 6mm terminal connection type.
  • Ultra-thin and lightweight design, metal gear, smooth rotation, no sticking point position.
  • [Application]: Widely used for CNC numerical control system, such as CNC lathes, CNC grinding machines, CNC milling machines, engraving machines, etc.
  • [100% Satisfaction]: If you have any question about this item, please feel free to contact us, we will help you within 24 hours on weekdays.
Check Stock

SmallRig Nucleus-Nano Quick Release Mounting Clamp for Tilta Nucleus-Nano Hand Wheel – FAQ2323

  • SmallRig Attachment Plate 2323 is designed for helping nucleus-nato handwheel to attach on gimbals and any other camera equipment with 1/4”-20, 3/8”-16 and m4 threaded holes..
  • ▶ 【Multi-Functional】 Equipped with 1/4", 3/8" and M4 screws, SmallRig qr clamp could be used for Ronin S (via two m4 screws), for Zhiyun Crane2 (via Mountng Clamp 2119), for Moza Air2 (via Mounting plate 2319)..
  • ▶【Compatible with G2X Gimbal】 Could used with gimbal with M6 screw (not included).
  • ▶【Quick Release Design】 Features a quick release lever and installation mark for installation in few seconds..
  • ▶【More Security】 The adapter is anti-off designed to prevent the handwheel from accidentally sliding off..
Check Stock

SDTC Tech 3.94 Inch Three-Spoke Round Hand Wheel Detachable Hand Crank Revolving Handwheel with Handle for Woodworking, Printing, Machinery etc.

  • The hole size of the round hand wheel conforms to the standard shaft diameter, and it can be disassembled by tapping..
  • Handwheel Total Diameter: 100 mm / 3.94 inch, Center Bore Diameter (approx.): 12 mm / 0.47 inch, Keyslot Width: 4 mm, Handle Height: 50 mm / 1.97 inch..
  • The hand crank wheel is made of high quality phenolic resin and metal material, with strong insulation and durability..
  • Design with rotary handle, handwheel with threaded hole for easy to assemble handle..
  • Widely used in industrial machine tools, such as milling machines, lathes, grinders, etc..
Check Stock

Rrina 0.47x4inch Diameter Round Hand Wheel W Revolving Knob Handle for Mill Drillpress Crank Lathe

  • MATERIAL: Made of high quality plastic, modern-design, strong insulation and durable in use..
  • PACKING QUANTITY: This hand wheel set includes: 1 x main revolving handwheel, 1 x handle grip(Knob), M6 mounting screws 2Pcs, wrench 2Pcs..
  • SUITABLE FOR: Industrial machine tools, such as milling machines, lathes, grinders, and medical equipment, etc..
  • SIZE: Diameter of hole in hand wheel 0.47in/12mm, fixing thread hole size M6, diameter of handwheel 4in, hand wheel Total Height: 46mm / 1.81".
  • handle Size: 22mm/0.88" x 64mm/2.51"(Max.D x L), handle thread diameter: M8.
  • Note: Please confirm whether the size is appropriate before placing the order..
Check Stock

LGXEnzhuo Manual Sugar Cane Press Juicer Machine Stainless Steel Sugarcane Crusher Extractor 3 Rollers Sugarcane Ginger Sweet Sorghu Squeezer with 2 Knives

  • MANUAL OPERATION-The hand-operated sugarcane juicer is equipped with flat mouth design and large feed inlet, which can easily put sugarcane into the....
  • STAINLESS STEEL-The key components of this machine are made of stainless steel, which is healthy and clean during the squeezing juice process..
  • HIGH JUICE YIELD-Three stainless steel solid rollers can easily separate slag and juice, and the juice yield is higher. With 2 adjusting nuts, which....
  • HANDWHEEL-Large diameter handwheel is attached to the side of the machine, and there are different sizes of gears inside, which can rotate easily and....
  • WIDE APPLICATION-With simple operation and high fruit juice output, it is suitable for juicing and sales in fruit shops, cold drink shops, herbal tea....
Check Stock

TECHTONGDA Sugar Cane Juicer Machine Manual Sugarcane Juice Machine Commercial Sugar Cane Press Extractor Sugar Cane Juice Squeezer with Handwheel and 2 Knives for Homes and Shops

  • @【Manual Operation】~Output: 110-330 lb/h (50-150 kg/h).
  • Juice Extraction Rate: (60-80) / 100. Manually operated with a hand crank pulley that is....
  • @【Adjustable Knobs】~Manual sugarcane juice machine equipped with two adjustable knobs, you can adjust to control the gap between the roller based....
  • @【High performance】~This sugar cane juicer machine can fit up to 2 inch thick sugar cane.
  • Designed with three heavy duty stainless iron rollers....
  • @【Need Caution】~The installation of the handwheel needs to be aligned. If the handwheel is not easy to install, please remove the paint on the....
  • @【Widely Application】~This commercial sugar cane press extractor is super-efficient and well built.
  • you could drink directly after pressing.....
Check Stock

Yonntech Manual Heat Press Extractor Machine 110V, Hand-Operated Twist Hot Press Heating Transfer Pressing Machine, 2.4\X4.7\ Dual Heating Plates

  • 【900W Heat Press Extractor Machine】 Can quickly heat up and press. Voltage: 110V AC.
  • Temperature Range: 32-482℉ (0-255 ℃). Used for pressing and squeezzing oil, heat pressing on textiles, heat transfer application..
  • 【Dual Heating Plates】 Upper & lower dual heating element plates, thickened aluminum construction, make the temperature rise quickly, heat press evenly..
  • 【Individual Controllers for Heating Plates】 Adopts two controllers with LCD screen: one is for controlling the upper heating plate, the other one for lower plate. Both can set time and temperature, digital LCD display, Fahrenheit and Celsius are alternative. Independent control sensor can guarantee the accuracy of heating effect..
  • 【360° Rotatable Pressure Handwheel】 You can easily turn the handwheel manually, to move the upper heating plate up and down, allow easy and flexible pressure adjustment..
  • 【Easy for Cleaning and Maintenance】 The heating plate is coated with temperature-resistant and anti-sticking layer, which is convenient for cleaning and oxidation resistance..
Check Stock

15x Heavy Duty Lockout Hasps 1.5inch Tagout Kit Safty Clamp Red

  • ... of the faucet and the product before purchasing to ensure that the product fits your faucet perfectly.).
  • 【Well Built】Our valve locks are made of ABS, an engineering material that is impact resistant and can withstand rough and harsh environments without cracking. When locked, the device is enclosed in the valve handwheel and can rotate freely to prevent the handwheel from opening accidentally..
  • 【Reliable Fit】Suitable for 1 to 2-1/2 inch diameter gate valve handle with up to 3/4 Inch Diameter Stems, can accommodate padlock shackle with max 3/8 inch outside diameter..
  • 【Bright and easy to follow】1 set of 2 red gate valve locks. Highly visible and eye-catching, no longer worry about being stolen water. (Note: locks and keys are not included, please purchase your own if needed.).
  • 【Application】It is suitable for outdoor faucets and used in combination with padlocks to help protect against valve opening during maintenance and repair. It can also be used for the locking of natural gas, oil, propane tanks and other chemical industry uses..
Check Stock