DAOKI 10PCS LED Display 7 Segment 1Bit 2Bit 3Bit 4Bit Common Cathode 10PIN Red Light for Arduino,DIY + Jump Wire
- Type:Common Cathode(Note:5643 Series may be Common Cathode or Common Anode, Be suject to part number).
- Five different LED Display 7 Segment are available to satisfy your different needs..
Check StockSEEU. AGAIN 4pcs 8-Digit 7 Segment Module MAX7219 8 Bit Digital Segment Tube LED Display Module Supports Cascade Eight Bit Serial 3 IO Ports for MCU/51/AVR/STM32
- MAX7219 is an integrated serial input / output common-cathode display driver, which connects your microprocessor to a 7-segment digital LED display with 8 digits.
- MAX7219 digital display control module, you can use it..
- The module is compatible of 5V / 3.3V microcontroller.
- Only three IO ports are used to drive the eight digit display..
- Only three IO ports are used to drive the eight digit display. MAX7219 supports flicker free displays as well as cascading displays.
- PCV board four corners of the fixed copper stud, which can effectively precent short circuit accidents happen..
- Wiring instructions (a program, for example, you can pick any IO port definition can be modified in the program): VCC to 5V, GND to GND, DIN to P00, CLK to P02, CS to P01.
- Digital tube is 0.36 inch 4-bit integrated cathode digital tube.
- Note:VCC and GND do not reversed, it would burn the chip.51 MCU P0 port requires pull-up resistor, if your device does not have a pull-up resistor can be connected to other ports data lines..
Check StockDC 5-12V/15-160V Stepper Motor Drive,PWM Adjustable Stepper Motor Controller Signal Generator Speed Regulator
- Power supply: 15-160VDC or 5-12VDC. If you are using 5-12VDC power, positive end connect DC 5-12V Input, negative end connect Common Cathode End..
- 3 Frequency: High: 5.8KHZ-127KHZ, Mid: 590HZ-15.8KHZ, Low: 82HZ-2.3KHZ.
- To control the stepper motor, mus connect to the driver.
- PUL + and PUL- pulsed positive and negative.
- EN + and EN- is to enable the positive and negative terminals.
- DIR + and DIR- are the positive and negative directions..
- Frequency of measurement can amount PUL and common cathode terminal (GND) two ports..
Check StockSKOANBE SR721SW 362/361/162 1.5V Button Coin Cell Watch Battery-10 Packs
- Suitable for the following models: SR721SW, 362/361, SR721, LR58, AG11, LR721, SR721W, SR58, 362A,423,532,601, 280-29, 362-1W,D361, D362, G11,....
- Long lasting power: SKOANBE adopts new energy technology and insists that every battery undergoes strict quality control and power testing to ensure....
- Low self-discharge: quality assurance, if stored properly, the annual self-discharge will be less than 2%, after 3 years it can still maintain 90% of....
- Voltage stability: the use of chemically stable cathode materials, no high and low unstable currents, effectively prevent unstable currents from....
- You will get: 10 Pack SR721SW Watch battery equipped with the latest plastic packaging technology and peace of mind service.
Check Stockuxcell Common Cathode 10 Pin 1 Bit 7 Segment 1.1 x 0.79 x 0.35 Inch 0.55\ Red LED Display Digital Tube 10pcs
- Panel Size: 19 x 12.7 x 8mm / 0.75" x 0.5" x 0.31" (L*W*H).
- Total Size: 19 x 12.7 x 14mm / 0.75" x 0.5" x 0.55" (L*W*H).
- Package Content: 10 x LED Digital Display Tube.
Check Stockuxcell Common Cathode 10 Pin 2 Bit 7 Segment 1.41 x 1.02 x 0.39 Inch 0.8\ Red LED Display Digital Tube 2pcs
- Panel Size: 35.8 x 25.8 x 10mm / 1.41" x 1.02" x 0.39" (L*W*H).
- Total Size: 35.8 x 25.8 x 14mm / 1.41" x 1.02" x 0.55" (L*W*H).
- Package Content: 2 x LED Digital Display Tube.
Check StockOWOFYDR 1N5408 Rectifier diode 3A 1000V 3A 1000V axial Electronic Silicon diode DO-201AD(DO-27) (50pcs)
- 1. Diode model: 1N5408, forward rectification current: 3A.
- maximum repetitive peak reverse voltage: 1000V.
- 2. Features: low reverse leakage/high forward surge current capability/high current capability/high temperature welding.
- 3. Lead-free RoHS-compliant electronic components/molded plastic housing/plated axial leads/through holes.
- 4. Polarity: The ribbon represents the cathode, and the detailed specification data is shown in the sub-picture of the product.
- 5. Packed in ESD self-sealing bags with clear labels, which is convenient for you to confirm the model parameters and prevent static electricity generated by friction from damaging electronic materials..
Check Stockuxcell Common Cathode 10 Pin 2 Bit 7 Segment 0.59 x 0.55 x 0.28 Inch 0.35\ Red LED Display Digital Tube 5pcs
- Panel Size: 15 x 14 x 7.2mm / 0.59" x 0.55" x 0.28" (L*W*H).
- Total Size: 15 x 14 x 13.5mm / 0.59" x 0.55" x 0.53" (L*W*H).
- Package Content: 5 x LED Digital Display Tube.
Check Stockuxcell Common Cathode 12 Pin 4 Bit 7 Segment 1.18 x 0.55 x 0.28 Inch 0.35\ Red LED Display Digital Tube 5pcs
- Panel Size: 30 x 14 x 7.2mm / 1.18" x 0.55" x 0.28" (L*W*H).
- Total Size: 30 x 14 x 13.5mm / 1.18" x 0.55" x 0.53" (L*W*H).
- Package Content: 5 x LED Digital Display Tube.
Check Stockuxcell Common Cathode 11 Pin 3 Bit 7 Segment 0.89 x 0.55 x 0.28 Inch 0.35\ Red LED Display Digital Tube 5pcs
- Panel Size: 22.5 x 14 x 7.2mm / 0.89" x 0.55" x 0.28" (L*W*H).
- Total Size: 22.5 x 14 x 13.5mm / 0.89" x 0.55" x 0.53" (L*W*H).
- Package Content: 5 x LED Digital Display Tube.
Check StockApera Instruments, LLC-AI1312 Apera Instruments 201T-S pH/Temp. Electrode, 8-pin Connector, The Replacement Electrode for Apera 400/400S Series Portable Meters
- 3.Glassy carbon electrode is one of the widely used working electrodes. It is a good inert electrode with good conductivity, high hardness, high finish, high hydrogen overpotential, wide polarization range and chemical stability. It can be used as inert electrode for anodic stripping, voltammetric determination of cathode and variable valence ions, and can also be used as chemically modified electrode.
- 4.The glassy carbon surface must be mirror and clean. Since the surface of glassy carbon is easily polluted by some organic metal compounds, which seriously affects the measurement (no peak, no impurity peak and no recurrence), it must be cleaned before measurement.
- 5.There are three main maintenance methods, chemical method 1. Nitric acid immersion and scrubbing. 2. Soak and scrub with ammonia water, anhydrous ethanol or acetate 1:1. 3. It can also be scrubbed with alcohol and then soaked in 6nhcl or 4nho3. Electrochemical treatment: repeated polarization (reset scan) (anode cathode to cathode) in the voltage range of + 0.8V - (- 1.8V (0.5mkclph7 except o2i).
Check StockOWOFYDR 10SQ045 15SQ045 20SQ045 Schottky diode 10A 45V/15A 45V/20A 45V Solar Panel axial Electronic Silicon diode R-6 (30pcs)
- 1. Diode model: 10SQ045/15SQ045/15SQ045, 10pcs for each model, 30pcs in total..
- 2. Features: low reverse leakage/high forward surge current capability/high current capability/high temperature welding.
- 3. Lead-free RoHS-compliant electronic components/molded plastic housing/plated axial leads/through holes.
- 4. Polarity: The ribbon represents the cathode, and the detailed specification data is shown in the sub-picture of the product.
- 5. Packed in an ESD self-sealing bag with clear labels, which is convenient for you to confirm the model parameters and prevent static electricity generated by friction from damaging electronic materials..
Check StockWATERWICH 12V 24V Volt Meter LED Digital Display DC Voltmeter Voltage Meter with Terminals for Car Automobiles Motorcycle Truck Boat Marine (12V-24V Red Voltmeter)
- Measure voltage: 6-30V,The meter has easy to read LED segments and connect to your 12 volt system., great mini voltmeter to monitor your vehicle battery status,with reverse connection protection function, line will not be burnt..
- Mounts in a 11.42" hole in panels up , a nylon retaining nut holds the meter in place..
- CE Certification,Made of environmental protection against fire retardant materials,Easy to use and install..
- LED Light Color:Blue,Green,Red.Size:14.18'' x 5.9'' x 11.42'', , Simple,small and elegant design,Interface type: Anode and Cathode.
- Great for 12-24V Car Boat Marine Vehicle Motorcycle Truck ATV UTV Camper,Caravans,Travel Trailer etc..
Check Stock