Categories

Best Ccmt32 51 Carbide Insert

OSCARBIDE 3/4'' x 10'' Indexable Boring Bar with 10 Pieces Carbide Inserts CCMT09T304(CCMT32.5),Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 3/4'' x 10'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

OSCARBIDE 1/2 x 7 Indexable Boring Bar with 10 Pieces Carbide Insert CCMT09T304 CCMT32.5 Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 1/2" Shank Diameter,Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient,good wear resistance.
  • Used for Turning internal hole,reaming,copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 1/2'' x 7'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

Accusize Industrial Tools 5/8'' Sclcr Indexable Boring Bar with 1 Ccmt32 Insert, P252-S405

  • Shank Diameter: 5/8''. Overall Length: 8''. Min. Bore: 0.866''..
  • Boring from light roughing to finishing in small bores. Insert CCMT 32.51 Included & Key Included.
  • Accepts Inserts CCMT 32.51 and CCMT 32.52. Profiling bar for semi-finishing and finishing operations.
  • Bar hardness approximately 45HRC. Extreme gloss finish.
  • Negative 5 degree end & side cutting angle. Positive 80 degree diamond CCMT inserts.
Check Stock

ASZLBYM 2PCS 5/8\ MGIVR2016-2 MGIVL2016-2 Lathe Boring Bar Grooving Cut-Off Tool Holder with 2PCS MGMN200-G NC3020 Insert

  • Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • Packing:1 pc 5/8'' x 8'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

OSCARBIDE Carbide Turning Inserts 10 Pieces/Pack,MGMN200,11ER A60,GTN-2,WCMT050304,CCMT060204,DCMT070204 CNC Lathe Carbide Insert for 1/2\ Shank Indexable Lathe Turning Tool Holder Insert Replacement

  • Insert: Grooving Insert MGMN200,External Threading Inserts 11ER A60 ,Turning Insert WCMT050304(WCMT2.521),GTN-2(QC1402),CCMT060204(CCMT21.51),DCMT070204(DCMT21.51),SCMT060204(SCMT21.51).
  • Material: made of solid carbide with Tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Designed for Steel, cast iron and non-ferrous materials.
  • Used for turning and finishing on a wide range of materials.
  • 10 pieces Carbide inserts for replace our 1/2” Lathe turning tool holder set , or other brand same size holder, you can search Asin:B086PTB3K3 and buy tool holders.
Check Stock

OSCARBIDE Carbide Turning Inserts MGMN200,11ER A60,WCMT2.5,CCMT060204,DCMT070204 CNC Lathe Insert for Indexable Lathe Turning Tool Holder Insert Replacement 7 Pieces

  • Insert: Grooving Insert MGMN200,External Threading Inserts 11ER A60 ,Turning Insert WCMT050304(WCMT2.521),CCMT060204(CCMT21.51),DCMT070204(DCMT21.51).
  • Material: made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Designed for Steel, cast iron and non-ferrous materials.
  • Used for turning and finishing on a wide range of materials.
  • 7 pieces Carbide inserts for replace our 1/2” or 3/8” Lathe turning tool holder set , or other brand same size holder, you can search Asin: B07PLYG1Y4 or B07MDC5LMX and buy tool holders.
Check Stock

OSCARBIDE Carbide Turning Inserts CCMT060204 CCMT21.51 CCMT Insert Mutilayer Coated CNC Lathe Inserts for Lathe Turning Tool Holder Cut Off Tools 10 Pieces

  • Size: CCMT 21.51(CCMT060204), 3/32" Thick,1/64" Radius..
  • Material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance.
  • Designed for Steel, cast iron and non-ferrous materials.
  • Used for turning and finishing on a wide range of materials.
  • 80 degrees diamond single sided insert with molded chipbreaker, 10pcs/pack.
Check Stock

OSCARBIDE 5/8''by 8''Indexable Boring Bar Right-Hand Sclcr Boring Bar with CCMT09T304(CCMT32.5),1 Piece

  • Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Indexable Boring Bar Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.
Check Stock

OSCARBIDE 1/2'' x 7''Indexable Boring Bar,Right-Hand Sclcr Boring Bar with Carbide Insert CCMT09T304(CCMT32.5),1 Piece

  • Sclcr Boring Bar 1/2" Shank Diameter, Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.
Check Stock

OSCARBIDE Indexable Boring Bar 3/4 x 10 Overall Length,Right-Hand Sclcr Boring Bar S12S-SCLCR3 with CCMT09T304 CCMT32.5 ,1 Piece

  • Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.
Check Stock

Accusize Industrial Tools 7 Pieces/Set 1/2'' Indexable Carbide Turning Tool Set with 10 Extra Carbide Inserts in Fitted Box, 2387-2004plus

  • Model of each holder & the original insert: MGEHR08-2J (insert: MGMN200-M).
  • Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
Check Stock

ASZLBYM 21PCS 1/2\/12mm Shank Indexable Carbide Lathe Turning Insert Tool Holder Bit Set for Turning Grooving Threading Boring with Indexable Carbide Turning Insert CCMT21.51 DCMT 16ER 11IR MGMN200-G

  • ♥PACKAGE INCLUDES : 7 pieces 12mm / 1/2”shank indexable carbide lathe turning tool holders( SDNCN1212H07, SDJCR1212H07, SCLCR1212H06, SER1212H16, MGEHR1212-2, S12M-SCLCR06, SNR0012M11), 14 pieces indexable carbide inserts(CCMT21.51, DCMT21.51, 11IR A60, MGMN200-G, 16ER A60), 7 pieces wrenches..
  • ♥Each tool holder comes with a C6 TiN Coated indexable carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • ♥7 PIECES LATHE INSERT TOOL HOLDERS : the material of the holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, boring, facing, external grooving, etc..
  • ♥14 PIECES INDEXABLE CARBIDE INSERTS: the material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability..
Check Stock

Accusize Industrial Tools 5/8'' Shank 7 Pc Indexable Carbide Turning Tool Set in Fitted Box, 2387-2005

  • Model of each holder & the original insert: MGEHR10-3B (insert: MGMN300).
  • SCLCR10-3B & SCLCL10-3B (insert: CCMT32.5).
  • SDNCN10-3B & SDJCR10-3B (insert: DCMT32.5).
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size..
  • *** Insert kit Item#: 2387-2005INSERTS (Sold Separately on Amazon)***.
Check Stock