Categories

Best Ceiling Mount Projector

Epson, EPSV11H985020, PowerLite 119W 3LCD WXGA Classroom Projector with Dual HDMI, 1 Each

  • High Quality: Crafted from premium quality and heavy duty steel to provide a reliable projector mount with maximum strength and support up to 33 lbs, so your projector can be better protected and fixed.
  • Full Motion Angle Adjustment: The projector mount direction is fully adjusted with 30-degree tilt, 30-degree swivel and 360-degree rotation, hitting all the right viewing angles.
  • Low Profile Design: Dependable projector mounting bracket holds your projector just 5.5'' from the ceiling surface.
  • Universal Compatible Mounting: This projector ceiling mount supports most projector on the market with distance between the mounting holes on back 12 inches or less. This mount can be used on flat or sloped ceiling.
  • Package includes: A pre-assembled projector ceiling mount and all necessary hardware and instructions booklet. If our product is not suitable for your projector, or if you have any questions about the product and package, please do not hesitate to contact us.
Check Stock

DYNAVISTA Full Motion Universal Projector Ceiling Mount Bracket with Adjustable Extendable Arms Rotating Swivel Tilt and Low Profile Mount for Home and Office Projector (White)

  • UNIVERSAL COMPATIBILITY: This adjustable projector mount offers the perfect fit on most projector models. Using the four built-in individually rotating adjustable arms on this articulating projector mount, you can easily extend or retract to suit various models..
  • FULL MOTION MOUNT: This projector ceiling mount is adjustable with its intuitive 360-degree rotation, 30-degree tilt, and a retractable aluminum column for height adjustments from 21 inches up to 34.5 inches..
  • EASY TO INSTALL: You can install our ceiling mount for your projector in less than 10 minutes! The quick-release feature allows your projector to be installed quickly and then easily released too..
  • HEAVY-DUTY BUILD: We've used only the highest grade steel to construct this heavy-duty universal ceiling mount for your projector. It's able to support up to 30 lbs of weight and is UL certified..
  • SLEEK AND MINIMAL: Install your projector on your ceiling using this stylish, minimal, and subtle ceiling bracket, and watch your entertainment set up blend into the room like it wasn't even there..
Check Stock

NIERBO Universal Projector Wall Ceiling Mount Hanger 360°Rotatable Head with Extendable Length 11.8 Inch to 19.7 Inch / 11 lbs Load Mounting Bracket

  • Universally Compatible: This projector ceiling mount supports most projector brands with distance between the mounting holes on back 13.4 inches or less. This mount can be used on flat and sloped up to 55°ceiling..
  • High Grade Material: Crafted from premium quality and heavy duty steel to provide a reliable projector mount with maximum strength and support. Max Load: 33 lbs. (15kg)..
  • Adjustable Full Motion Mount: Our projector ceiling mount can tilt 15 degrees from left to right, tilt 15 degrees from front to back and 360 degrees rotation, hitting all possible viewing angles. Holds projector at 5 inch from the flat ceiling..
  • Easy to Install: Pre-assembled, this projection mount can be set up in a few steps with quick release hooks that attach and detach by tightening and loosening mounting bolts..
  • Package includes: A pre-assembled projector ceiling mount and all necessary hardware and instructions booklet. Compatible with BenQ, Epson, Acer, Optoma, Sony, Video, Dell and other popular brands..
Check Stock

DYNAVISTA Full Motion Universal Ceiling Projector Mount Bracket with Adjustable Extendable Arms Rotating Swivel Tilt Mount for Home and Office Projector (Extendable-Silver)

  • Universally Compatible: This projector ceiling mount supports most projector brands with distance between the mounting holes on back 12.1 inches or less. This mount can be used on flat ceiling..
  • High Grade Material: Crafted from premium quality and heavy duty steel to provide a reliable projector mount with maximum strength and support. Max Load: 30 lbs (13.6kg)..
  • Full Motion Adjustable Mount: Our projector ceiling mount can tilt 25 degrees up and down, swivels 90 degree from left to right and 360 degrees rotation, hitting all possible viewing angles. The mount provides a 43.6-inch extension and collapses to 23-inch from the ceiling using the extendable arm and 8.9-inch without the arm..
  • Easy to Install: Pre-assembled, this projection mount can be set up in a few steps with quick release hooks that attach and detach by tightening and loosening mounting bolts..
  • Package includes: A pre-assembled projector ceiling mount and all necessary hardware and instructions booklet. Compatible with BenQ, Epson, Acer, Optoma, Sony, Video, Dell and other popular brands..
Check Stock

Henxlco Universal Projector Mount Wall or Ceiling Bracket with Adjustable Height and Extendable Arms Tilt DLP LCD Projection Mount for Home and Office Different Size Projector (Black)

  • Universally Compatible: This projector ceiling mount supports most projector brands with distance between the mounting holes on back 12.1 inches or less. This mount can be used on flat ceiling..
  • High Grade Material: Crafted from premium quality and heavy duty steel to provide a reliable projector mount with maximum strength and support. Max Load: 30 lbs (13.6kg)..
  • Full Motion Adjustable Mount: Our projector ceiling mount can tilt 25 degrees up and down, swivels 90 degree from left to right and 360 degrees rotation, hitting all possible viewing angles. The mount provides a 43.6-inch extension and collapses to 23-inch from the ceiling using the extendable arm and 8.9-inch without the arm..
  • Easy to Install: Pre-assembled, this projection mount can be set up in a few steps with quick release hooks that attach and detach by tightening and loosening mounting bolts. Warm Tip: To prevent the mount from shaking,please tighten the screws marked in the picture above..
  • Package includes: A pre-assembled projector ceiling mount and all necessary hardware and instructions booklet. Compatible with BenQ, Epson, Acer, Optoma, Sony, Video, Dell and other popular brands. If our product is not suitable for your projector, or if you have any questions about the product and pa....
Check Stock

WALI Projector Ceiling Mount, Universal Low Profile Projector Mount with Retractable Arms and Multiple Adjustment Function (PM-002-W), White

  • Compatibility: Projector mount fit most of the projector in the market, compatible with distance mounting holes between 2" to 12.5”..
  • Heavy Duty: Support maximum loading weight 30 lbs/13.5 kg. Regular concrete and brick ceiling or wooden stud supported. NOTE: This mount does NOT support the vaulted ceiling and regular drywall..
  • Fully Adjustable: Tilt +/- 15 degrees and swivel +/- 15 degrees. Angle adjustment bracket allows 360 degrees of rotation. Low profile design for quick and precise projector positioning..
  • Easy installation: quick release and fasten the mount to the ceiling makes installation easy. Mounts to Wood studs, concrete and wall surfaces, flat ceiling, drop ceiling, suspended ceiling, etc..
  • Package Includes: WALI Projector Ceiling Mount (White) x 1, Mounting Hardware Kit x 1, User Manual x 1, experienced and friendly US based customer support available to assist 7 days a week..
Check Stock

ALZO Short Suspended Drop Ceiling Video Projector Mount with Scissor Clamp for T-Bar Attachment with 10 Inch Drop

  • Mount fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling.
  • fits Epson, Optoma, Benq, Viewsonic and most other projectors.
  • Easy to install on a suspended drop ceiling with a 1-inch wide T-Bar frame, with 25 degrees pitch.
  • projector drop from the ceiling is 10 inches, and accessory 8-inch extension rods can be added to lower the projector. With the typical drop ceiling, a medium to heavy projector a small amount of movement or sway will occur when touching the projector. We recommend using a remote control where possible. Using the included support wire will provide for a very safe install.
  • Includes an AMERICAN WRITTEN installation manual with illustrations and photos.
  • Includes scissor clamp and one 8 inch aluminum suspension rod, and screws.
  • maximum spider mount leg span is 12 inches, mount hole to mount hole.
  • it is shown for demonstration purposes only.
Check Stock

Anker Nebula Cosmos Projector Stand, Fits All Nebula Projectors, ¼-Inch Mounting Bracket, Mini Wall or Ceiling Projector Mount

  • Projector Mounts made of high quality aluminium alloy. If your projector is less than 11lbs and has one hole in the projector bottom will be suitable. Please don't buy it, if your projector hasn't a hole..
  • Projector Wall Mount Loading capacity 11 lbs (5 kg), Telescopic tube diameter is 1.2 "(3cm), with extension pole, height adjustable from 11.8" - 19.7" ..
  • Swivel your projector 360 degrees to meet a myriad of needs and desires..
  • Ceiling Mount Projector Including all accessories and have 0.15" and 0.23" 2 kinds of replaceable screws..
  • Projector Ceiling Mount Fits most projector Brands ,if you have any question pls feel free contact us thanks!.
Check Stock

VideoSecu LCD DLP Tilt Swivel Sloped Projector Ceiling Mount Bracket Fit Flat and Vaulted Ceiling PJ1B WU7

  • VideoSecu projector mount for flat ceiling and vaulted ceiling.
  • The projector mount can tilt +/-20 degree, pan 45 degree, Swivel 90 degree and roll +/-15 degree.
  • The Adjustment arm (16 inch Max arm distance) fit most projectors.
  • Standard hardware required to fasten the mount to your ceiling and your projector included.
Check Stock

Movable Projector Stand with 38mm Ball Head tilt Adjustable, Portable Desktop Projector Mount for 3.5 mm inport Projectors Home Office and Outdoor Blanou

  • Universal Camera Mount - The tray has a usable size of 35cm*22cm and fits most video conferencing cameras, projectors and routers on the market..
  • Height Adjustable - The projector mount can be mounted on the wall or ceiling. The extendable height of the projector can be adjusted to the ceiling for 34cm to 56cm..
  • Premium Materials - This projector stand is made of high quality Carbon steel to support projectors up to 22 lbs..
  • Unique DRSN Design - White surface finish blends beautifully with most home and office environments with its simplicity. The bottom of the tray is hollowed out to ensure timely heat dissipation. In-tube wiring for comfort and cleanliness.
  • Easy to Install - After assembling the mount, simply screw the mount to the ceiling and place the projector or camera on the tray..
Check Stock

Universal Mini Projector Mount 2-Be-Best Mini Projector Ceiling Mounts 7 in / 18 cm 360 Rotation Mini Projectors Wall Mount Holder with Thread Adapters for Projector CCTV DVR Camera

  • UNIVERSAL Projector MOUNT fits most mini projectors with 3 threads 0.15/0.23/1/4 in (3.9/5.9/6.35 mm) with 2 sizes screw adapters with a length of 180 mm / 7 in. Compatible for DR. J, Qkk vankyo Topvision Projectors etc. Also for Video LCD/DLP Projectors for Home, Media Room, Office or Classroom..
  • ADJUSTABLE Projector Mount with a Pivot Ball Head that allows 360 Rotation and 180 tilt with a knob to fix a suitable angle easily and quickly. Great as Projectors CCTV DVR DV Camera DSLR LED Light Desk Stand that need flexible adjustment..
  • Mini Projector Mount is made of with Nice Aluminium Alloy for mini devices with Larger Base and Thickened Tube with a real max loading capacity 11 lb/5 kg.(pls tighten all parts, screw in solid spot, use toggle bolts for drywall).
  • Wall and Ceiling Projector Mount is easy to be Hooked up with accessories, like, screws and screw hole fillings. Cable Zip Ties provided to help cable management (or let cable go through cable hole).
  • MULTI-FUNCTIONAL PROJECTOR MOUNT is a 3-in-1 projector mount as ceiling mount, wall hanging mount, or desktop stand. Pls tell us know any problem. Were always here for our dear customers..
Check Stock

Universal Projector Mount Projector Ceiling Mount 360° Rotatable Tilt 180° Projector Wall Mount Hanger with Length 7in /18cm Compatible with Most Mini Projector CCTV DVR Lamp Camera for Home Office

  • 1. Adjustable projector mount bracket can rotate 360 degrees and tilt 180 degrees with a knob to fix the angle easily.The length of projector holder is 7 in /18 cm..
  • 2. Projector wall mount is made of high-quality aluminium alloy. The wall tube is designed to be thicker. It is suitable for equipment with large base such as mini projector and camera. The actual maximum carrying capacity is 11 lbs/5 kg..
  • 3. The installation of mini projector mount is easy. We are equipped with screw and screw hole filler and other accessories. You can install them on the ceiling or on the wall. (pls tighten all parts, screw in solid spot, use toggle bolts for drywall.).
  • 4. Universal projector mount pole has three different sizes of screw connectors to achieve maximum compatibility. Applicable to office, home or classroom multi-functional projector, closed-circuit television, digital video recorder, camera, tracking camera, CCTV, LED lamp holder, etc. Attached M4 and M6 conversion screws, cost-effective!.
  • 5. Projector ceiling mount has excellent Warranty:1-year-replacement / refund. Please tell us about any problem! We will try our best to serve our dear customers!.
Check Stock

Amer AMRDCP100KIT Universal Adjustable 2 x 2 feet Drop Ceiling Projector Mount, Suspended Drop-in Ceiling Projection Mounting Kit, White

  • VIVO Drop Ceiling Projector Mounts - We create affordable solutions designed with creativity and quality to transform your visual display. MOUNT-VP07DP is a projector mount capable of replacing any 2’ x 2’ ceiling tile, providing custom placement options with no drilling required. --Patent Pending--.
  • Universal Projector Mount - Adjustable mounting points enable this bracket to fit the majority of projector brands on the market with mounting hole diagonals measuring up to 12.5”. If your projector has 3 mounting holes, simply remove one of the arms to fit your display..
  • Fully Adjustable - Enjoy comfortable viewing angles that reduce strain on the neck, back, and eyes with -15° to +15° tilt, -15° to +15° swivel, and 360° rotation. Cable management holes are provided in the plate to keep cords organized and tangle-free during adjustments..
  • Strong Support - The steel plate replaces a standard ceiling tile and can hold up to 29.7 lbs for a safe and secure setup. Featuring sleek, durable material, it’s made to last and fit virtually any environment..
  • We've Got You Covered - Sturdy steel design is backed with a 3 Year Manufacturer Warranty and friendly tech support to help with any questions or concerns..
Check Stock