Categories

Best Cemented Carbide Mill Rolls

90° Chamfer End Mill 2 Flute Tungsten Steel Cemented Carbide Precise for Machine Tools(1075L)

  • Suitable for machine tools, milling machines..
  • This is 90 degrees 2 flutes chamfer end mill, precise and durable.
  • It is not only suitable for chamfering of ordinary machined parts, but also suitable for chamfering and deburring of accuracy difficult-to-chamfered parts..
  • Made of tungsten steel cemented carbide material, high hardness and long service life.
Check Stock

33 Pieces Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 30 CNMG 431 + WNMG 431 + TNMG 331 Metal Indexable Carbide Turning Insert Blades

  • ..., 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 3 pieces carbide inserts and 10 pieces CNMG 431,10 pieces WNMG 431, 10 pieces TNMG 331 metal indexable carbide turning insert blades, cufficient quantity and easy to replace.
  • Material: lathe indexable carbide turning tool holders are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability.
  • Size: diameter of the handle is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and accuracy have reached the first grade.
  • Easy to store: insert 30 pieces of cemented carbide into 3 boxes, and put them in a plastic container, safe and easy to store, compatible with MTJNL1616H16, MWLNL1616H08, MCLNL1616H12 or MTJNR1616H16, MWLNR1616H08, MCLNR1616H12.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a d....
Check Stock

Carbide Dovetail Cutter 60 Degree 6 Flutes Slotting Milling Cutter Cutting Tool Metalworking End Mill Straight Shank Diameter 20mm/ 0.8in

  • SPECIFICATIONS: Dovetail slot milling cutter, 60 degree angle and 6 flute design, the blade diameter is 20mm, with standard size and accurate cutting..
  • HIGH EFFICIENCY: With fine grinding grooves, efficient and flexible operation, smooth direct chip evacuation, fast drilling speed and labor saving operation..
  • CEMENTED CARBIDE: The dovetail slot mill is made of carbide material, which has high hardness, wear and corrosion resistance, has long service life..
  • EASY TO INSTALL: The dovetail cutter has glossy surface without burrs, high grinding accuracy and stable size, with universal straight shank for easy installation..
  • APPLICABLE MATERIAL: Suitable for processing stainless steel, carbon steel, cast iron, die steel, alloy steel, tool steel, non ferrous metals and other materials..
Check Stock

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

  • ...receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and differen....
Check Stock

High Hardness 90° 2 Flute Tungsten Steel Cemented Carbide Durable Convenient Chamfer End Mill for Chamfering for Milling Machines(860L)

  • Made of tungsten steel cemented carbide material, high hardness and long service life.
  • Suitable for machine tools, milling machines..
  • This is 90 degrees 2 flutes chamfer end mill, precise and durable.
  • It is not only suitable for chamfering of ordinary machined parts, but also suitable for chamfering and deburring of accuracy difficult-to-chamfered parts..
Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • ...receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and differen....
Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

  • ...receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and differen....
Check Stock

interjunzhan Micro Drill Bits, 50Pcs Durable Tungsten Carbide PCB Micro Drill Bits Set for Circuit Board Engraving Tool Drilling Tool Model Making 0.5-0.9mm 50pcs

  • Contains 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm size drill bits, each of which has 10, can provide you with a variety of work operations..
  • These end mill engraving heads are an ideal alternative to your CNC or PCB machinery..
  • Has sufficient bending strength and abrasion resistance..
  • Excellent processing technology can make your engraving more stable and accurate..
  • Made of ultra-fine grained cemented carbide material with good milling performance to ensure efficient work..
Check Stock

High Hardness 2-Flute Milling Cutter, Cemented Carbide Milling Cutter, for Milling PVC Processing Wood Plywood

  • Light weight and compact size, convenient to use and easy to carry around..
  • 10pcs cemented carbide milling cutter with high hardness, durable in use..
  • Adopting high quality cemented carbide material, ensuring long service life..
  • Suitable for processing wood, MDF, acrylic, PVC, EVA, foam, plywood, etc..
  • Clean surface without burrs, incisive cutting edge, milling, hole and edge..
Check Stock

Cannulated Reamer Orthopedic Instrument (8 mm - 14 mm) (1, 12 MM)

  • [INTEGRAL MOLDING] The reamer is integral molding, after quenching, which has stable sizes and good durability..
  • [CEMENTED CARBIDE] Made of cemented carbide material, with high hardness and wear resistance, not easy to deform and corrode..
  • [HIGH EFFICIENCY] With fine grinding flutes, chip removal is smoother without clogging, efficient and labor saving in operation..
  • [UNIVERSAL SHANK] The machine reamer has universal shank design, stable in clamping and not easy to slip or fall off..
  • [APPLICABLE MATERIAL] Suitable for drilling stainless steel, carbon steel, cast iron, die steel, alloy steel, non ferrous metal materials..
Check Stock

uxcell Cemented Carbide Twist Drill Bits 8.5mm Metal Drill Cutter for Stainless Steel Copper Aluminum Zinc Alloy Iron 6 Pcs

  • Cemented Carbide Tip: 8.5mm twist drill bits are made of cemented carbide tip for long service life, more sharp and durable than others.
  • Features: Milled U-flutes with deep-cut spiral delivers fast material removal. Suitable for drilling in tough metal, including heavy-duty abrasive alloy and hardened steel.
  • Use For: Drilling clean, accurate holes in sheet metal, steel, copper, brass, aluminum, plastic, wood, stainless steel and cast iron.
  • Use Note: Please use low speed when drilling and note the temperature of carbide tip is not too high for extending drill bit life.
  • Round Shank Design: Round shank twist drill bit can work with a electric drill (Excluding in the item)..
Check Stock

7 Piece Masonry Drill Bit Set for Tile Brick Cement Concrete Glass Plastic Cinder Block Wood [3/16，1/4，5/16，3/8，1/2 inch ] Chrome Plated with Industrial-Strength Carbide Bit with Storage Box

  • ...dustrial grade material】Made of selected high-quality high-strength alloy steel materials. Compared with ordinary Masonry Drill Bits on the market, it has higher hardness and wear resistance, and has lower cutting resistance. The well-designed high-hardness carbide tip can easily penetrate various materials. Cemented carbide drill bit is used as a material to improve durability..
  • 【Sturdy and durable】 Durable industrial-grade cemented carbide blades and cemented carbide with reinforced heads can prevent the drill from cracking and prolong its service life. Compared with traditional brick drill bits, its strength and sharpness are higher. Anti-rust, smoother drilling and cutting removal, higher hardness and wear resistance. The additional triangular handle can firmly fix the electric drill in the electric drill..
  • 【Wide range of applications】 The tough carbide tip of the pointed design can easily penetrate various materials, and can quickly penetrate and remove debris. Suitable for cement, concrete, ceramic tiles, drill blocks, glass, wood, cinder blocks, travertine, hard plastics, mirrors, etc.! The masonry Drill Bit Set includes 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch to meet the various requirements of home drilling.
Check Stock

10 Piece Masonry Drill Bit Set for Tile Brick Cement Concrete Glass Plastic Cinder block Wood [1/8，3/16，5/32，1/4，5/16，3/8，1/2 inch ] Chrome Plated with Industrial-Strength Carbide Bit with Storage Box

  • ...dustrial grade material】Made of selected high-quality high-strength alloy steel materials. Compared with ordinary Masonry Drill Bits on the market, it has higher hardness and wear resistance, and has lower cutting resistance. The well-designed high-hardness carbide tip can easily penetrate various materials. Cemented carbide drill bit is used as a material to improve durability..
  • 【Sturdy and durable】 Durable industrial-grade cemented carbide blades and cemented carbide with reinforced heads can prevent the drill from cracking and prolong its service life. Compared with traditional brick drill bits, its strength and sharpness are higher. Anti-rust, smoother drilling and cutting removal, higher hardness and wear resistance. The additional triangular handle can firmly fix the electric drill in the electric drill..
  • 【Wide range of applications】 The tough carbide tip of the pointed design can easily penetrate various materials, and can quickly penetrate and remove debris. Suitable for cement, concrete, ceramic tiles, drill blocks, glass, wood, cinder blocks, travertine, hard plastics, mirrors, etc.! The masonry Drill Bit Set includes 3/16 inch, 1/4 inch, 5/16 inch, 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch to meet the various requirements of hom....
Check Stock