Categories

Best Cemented Carbide Plate

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 3'' 76mm )

  • ✔️┋【More Teeth】Includes 15 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 3'' | 76mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable..
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock

Rocaris 13Pcs 16mm-53mm Stainless Steel Carbide Tip Metal Drill Bit Hole Saw Set

  • 【Innovative three-blade design】Designed as Three-blade for layered cutting, the Hole Saw Kit for Metal can make the cutting resistance smaller and....
  • 【Top Quality】Made of YG8 tungsten carbide steel, the Titanium-plated cemented carbide Tooth are sharp, anti-rust and durable.Ideal for hand held....
  • 【Fast Cutting】The teeth of metal hole saw kit are designed as front and rear low top tooth profile and Three-blade, which make it more efficient....
  • 【Multipurpose Tools】The carbide hole saw set are widely used in stainless steel plate, hard metal, iron, mild steel, alloy steel, aluminum, FRP,....
  • 【13 Different Size】Outside diameter Size: 16mm, 18mm, 20mm, 22mm, 25mm,26mm,28mm, 30mm, 35mm, 40mm,45mm, 50mm, 53mm.Wood can be drilled about 20mm....
Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

  • ...receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and differen....
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 1-3/4'' 45mm )

  • ✔️┋【More Teeth】Includes 10 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 1-3/4'' | 45mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock

TCT Hole Saw Set, 16-53mm Tungsten Carbide Tipped Hole, 13 Pcs Carbide Hole Saw Kit with Titanium Plated Pilot Drill Bit for Stainless Steel, Metal, Iron, Wood and Aluminum

  • Safe & Durable: This carbide hole saw set uses variable teeth technology with 3 distinct cutting edge to balance the cutting and make the blades more durable, sharp and more efficient for cutting hard metal..
  • Fasting Cutting: Carbide technology and optimized tooth geometry make hole cutter cut fast in most applications. This carbide hole cutter can precisely cut very smooth holes due to the concentricity rate..
  • Wide Application: 1/2 inch cutting depth makes this stainless steel hole cutter easy to pass through thick material such as: thick metal, stainless steel, iron pipes, aluminum, brass and sheet metal plate..
  • QUALITY MATERIAL: Our hole saw set are Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), Top-grade Titanium-plated cemented carbide Teeth ensures its high hardness, rust proof, sturdy and durable..
  • PACKAGE INCLUDES: The package includes 13 Pcs carbide hole saw: 16mm(5/8”), 18mm(45/64”), 20mm(25/32”), 22mm(55/64”), 25mm(63/64”), 26mm(1-1/32”) 28mm(1-7/64”), 30mm(1-3/16”), 35mm(1-3/8”), 40mm(1-37/64”), 45mm(1-49/64”), 50mm(1-31/32”), 53mm(2-3/32”). A variety of sizes to meet your different needs..
Check Stock

High Hardness 2-Flute Milling Cutter, Cemented Carbide Milling Cutter, for Milling PVC Processing Wood Plywood

  • Light weight and compact size, convenient to use and easy to carry around..
  • 10pcs cemented carbide milling cutter with high hardness, durable in use..
  • Adopting high quality cemented carbide material, ensuring long service life..
  • Suitable for processing wood, MDF, acrylic, PVC, EVA, foam, plywood, etc..
  • Clean surface without burrs, incisive cutting edge, milling, hole and edge..
Check Stock

Cannulated Reamer Orthopedic Instrument (8 mm - 14 mm) (1, 12 MM)

  • [INTEGRAL MOLDING] The reamer is integral molding, after quenching, which has stable sizes and good durability..
  • [CEMENTED CARBIDE] Made of cemented carbide material, with high hardness and wear resistance, not easy to deform and corrode..
  • [HIGH EFFICIENCY] With fine grinding flutes, chip removal is smoother without clogging, efficient and labor saving in operation..
  • [UNIVERSAL SHANK] The machine reamer has universal shank design, stable in clamping and not easy to slip or fall off..
  • [APPLICABLE MATERIAL] Suitable for drilling stainless steel, carbon steel, cast iron, die steel, alloy steel, non ferrous metal materials..
Check Stock

uxcell Cemented Carbide Twist Drill Bits 8.5mm Metal Drill Cutter for Stainless Steel Copper Aluminum Zinc Alloy Iron 6 Pcs

  • Cemented Carbide Tip: 8.5mm twist drill bits are made of cemented carbide tip for long service life, more sharp and durable than others.
  • Features: Milled U-flutes with deep-cut spiral delivers fast material removal. Suitable for drilling in tough metal, including heavy-duty abrasive alloy and hardened steel.
  • Use For: Drilling clean, accurate holes in sheet metal, steel, copper, brass, aluminum, plastic, wood, stainless steel and cast iron.
  • Use Note: Please use low speed when drilling and note the temperature of carbide tip is not too high for extending drill bit life.
  • Round Shank Design: Round shank twist drill bit can work with a electric drill (Excluding in the item)..
Check Stock

7 Piece Masonry Drill Bit Set for Tile Brick Cement Concrete Glass Plastic Cinder Block Wood [3/16，1/4，5/16，3/8，1/2 inch ] Chrome Plated with Industrial-Strength Carbide Bit with Storage Box

  • ...dustrial grade material】Made of selected high-quality high-strength alloy steel materials. Compared with ordinary Masonry Drill Bits on the market, it has higher hardness and wear resistance, and has lower cutting resistance. The well-designed high-hardness carbide tip can easily penetrate various materials. Cemented carbide drill bit is used as a material to improve durability..
  • 【Sturdy and durable】 Durable industrial-grade cemented carbide blades and cemented carbide with reinforced heads can prevent the drill from cracking and prolong its service life. Compared with traditional brick drill bits, its strength and sharpness are higher. Anti-rust, smoother drilling and cutting removal, higher hardness and wear resistance. The additional triangular handle can firmly fix the electric drill in the electric drill..
  • 【Wide range of applications】 The tough carbide tip of the pointed design can easily penetrate various materials, and can quickly penetrate and remove debris. Suitable for cement, concrete, ceramic tiles, drill blocks, glass, wood, cinder blocks, travertine, hard plastics, mirrors, etc.! The masonry Drill Bit Set includes 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch to meet the various requirements of home drilling.
Check Stock

Rocaris 10 Pcs Hole Saw Kit for Hard Metal 16-53mm, Tungsten Carbide Tipped Carbide Hole Saw Set with Titanium-Plated Pilot Drills for Stainless Steel, Metal, Iron, Wood, Plastic

  • 【Top Quality】 Made of high quality Tungsten Carbide Tipped Carbide, High-grade Titanium-plated cemented carbide Tooth are sharp, anti-rust and sturdy..
  • 【Innovative Three-blade Design】 Designed as Three-blade, The Carbide Hole Saw Kit‘s teeth is sharper and more efficient, ideal for cutting hard metals..
  • 【Chip Hole design】 Design chip hole to Prevent clogging, the Hole Saw Kit for Metal improve hole-opening efficiency without blocking..
  • 【Multipurpose Tools】The Metal Hole Saw Kit can be applied to electric drills, bench drills and hand drills.Widely used in stainless steel plate, hard metal, iron, mild steel, alloy steel, aluminum, FRP, and plastic to drilling holes. Not recommended for tile, glass, concrete, stone..
  • 【Great variety】Include 10Pcs Tungsten Carbide Tipped Hole Saw Set with 1Pcs hex wrenches(Size:16, 18, 20, 22, 25, 30, 35, 45, 50, 53mm). To prevent rust, each drill bit must be oiled. All drills are packed in an exquisite aluminum box, which would be a excellent present for you, your family and friernd..
  • 【Tips】For your safty, please make sure you wear SAFETY equipment such as a face shield (or Full Coverage Goggles) and gloves..
Check Stock

10 Piece Masonry Drill Bit Set for Tile Brick Cement Concrete Glass Plastic Cinder block Wood [1/8，3/16，5/32，1/4，5/16，3/8，1/2 inch ] Chrome Plated with Industrial-Strength Carbide Bit with Storage Box

  • ...dustrial grade material】Made of selected high-quality high-strength alloy steel materials. Compared with ordinary Masonry Drill Bits on the market, it has higher hardness and wear resistance, and has lower cutting resistance. The well-designed high-hardness carbide tip can easily penetrate various materials. Cemented carbide drill bit is used as a material to improve durability..
  • 【Sturdy and durable】 Durable industrial-grade cemented carbide blades and cemented carbide with reinforced heads can prevent the drill from cracking and prolong its service life. Compared with traditional brick drill bits, its strength and sharpness are higher. Anti-rust, smoother drilling and cutting removal, higher hardness and wear resistance. The additional triangular handle can firmly fix the electric drill in the electric drill..
  • 【Wide range of applications】 The tough carbide tip of the pointed design can easily penetrate various materials, and can quickly penetrate and remove debris. Suitable for cement, concrete, ceramic tiles, drill blocks, glass, wood, cinder blocks, travertine, hard plastics, mirrors, etc.! The masonry Drill Bit Set includes 3/16 inch, 1/4 inch, 5/16 inch, 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch to meet the various requirements of hom....
Check Stock

MCJ TCT Tools Hole Saw Set of 6 Electrician Tungsten Carbide Tipped Hole Cutter Set with Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, and Plastic Sizes 7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2

  • Industrial grade high-quality T.C.T. Carbide ( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust-proof, sturdy, and durability.
  • Tungsten carbide tipped hole cutters are ideal for drilling steel plate, stainless steel, iron, aluminum, copper, cast iron, fiberglass, and plastic.
  • Manufactured with premium high-grade solid carbide tips for added strength and durability. Tipped teeth for extra lifespan with tip: up to 1/4" cutting depth for stainless steel with a hand drill, 1" depth with a drill press.
  • Designed for use in a chuck - can be used with drill press or a hand drill.
  • Includes Sizes: 7/8",1-1/8",1-3/8",1-3/4",2",2-1/2" Set comes with customized casse for portability and designated slots to keep everything in place.
Check Stock

ASNOMY Tungsten Carbide Tipped Hole Saw Drill Bit for Hard Metal, 3/4 Inch T.C.T Hole Saw Cutter with 2pcs Titanium-Plated Pilot Drill bit for Metal, Steel, Iron, Wood, Plastic

  • 【Top Quality】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
  • 【Size】Cutting diameter：3/4Inch, Cutting Depth: 1Inch, Shank Dia.: 2/5 Inch(10mm) , perfect for drilling Hard Metal.
  • 【Unique Three-blade Design】 This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals.
  • 【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • 【High precision and Easy to Use】TCT Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
  • 【Package】Include 1pc T.C.T Hole Saw Cutter and 2pcs Titanium-Plated Pilot Drill bit，each hole cutters are individually cased in plastic box and each bit is also oiled (Prevent rust)..
Check Stock