Categories

Best Cemented Carbides

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

  • ...receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and differen....
Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • ...receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and differen....
Check Stock

33 Pieces Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 30 CNMG 431 + WNMG 431 + TNMG 331 Metal Indexable Carbide Turning Insert Blades

  • ..., 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 3 pieces carbide inserts and 10 pieces CNMG 431,10 pieces WNMG 431, 10 pieces TNMG 331 metal indexable carbide turning insert blades, cufficient quantity and easy to replace.
  • Material: lathe indexable carbide turning tool holders are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability.
  • Size: diameter of the handle is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and accuracy have reached the first grade.
  • Easy to store: insert 30 pieces of cemented carbide into 3 boxes, and put them in a plastic container, safe and easy to store, compatible with MTJNL1616H16, MWLNL1616H08, MCLNL1616H12 or MTJNR1616H16, MWLNR1616H08, MCLNR1616H12.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a d....
Check Stock

Hobart 770479 7018 Stick, 1/8-10lbs

  • This Electrode Deposits A Max Of .04% Carbon In The Weld Metal To Minimize The Formation Of Chromium Carbides.
Check Stock

Ski-Doo 860200580 Woody Executive Ski Carbide

  • Executive Carbides - REV Gen4, XP, XR, XU Tundra, XS, XM.
  • 1/2" round preformed material swedged at each end to best fit ski contour fitted with 8" of 60° turning carbide(pack of 2).
  • Performance trail riders are known to use this runner.
  • Provides proper balance with a studded track.
Check Stock

Starting Line Products Ski-Slips - Black 35-230

  • Made from high-quality UHMW plastic (the same material used in most plastic skis), which provides longer life and better performance than HDPE plastic.
  • Protect concrete floors, trailer decks, skis and carbides.
Check Stock

Seal FX Tanto

  • S35VN STEEL S35VN is advanced steel, with vanadium and niobium carbides that provide high degrees of toughness and wear resistance..
  • AMBIDEXTROUS KYDEX SHEATH With vertical and horizontal mounting options, SEAL FX comes with plenty of options to wear it how you want..
  • 30% GRN HANDLE With the same raised diamond pattern of the SEAL Pup, SEAL FX provides plenty of grip, with or without gloves..
Check Stock

Smith's JIFF-S 10-Second Knife and Scissors Sharpener

  • Sharpens all types of straight-edge knives.
  • Preset sharpening angle provides guaranteed results.
  • Reversible and replaceable carbide blades.
Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

  • ...receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and differen....
Check Stock

High Hardness 2-Flute Milling Cutter, Cemented Carbide Milling Cutter, for Milling PVC Processing Wood Plywood

  • Light weight and compact size, convenient to use and easy to carry around..
  • 10pcs cemented carbide milling cutter with high hardness, durable in use..
  • Adopting high quality cemented carbide material, ensuring long service life..
  • Suitable for processing wood, MDF, acrylic, PVC, EVA, foam, plywood, etc..
  • Clean surface without burrs, incisive cutting edge, milling, hole and edge..
Check Stock

60\ Low Profile Snowmobile Ski Glide Protector (Package of 4)

  • 4 Pack of 5' ski protector glides for use with snowmobile trailers, utility trailers, pickup truck beds and more.
  • low profile 0.375" thick grooved surface for reduced ski carbide friction.
  • Low profile grooved surface keep snowmobile carbides on track.
  • Recessed mounting points for flush attachment (Hardware not included).
  • Pre-formed HDPE material will not crack or chip.
Check Stock

Cannulated Reamer Orthopedic Instrument (8 mm - 14 mm) (1, 12 MM)

  • [INTEGRAL MOLDING] The reamer is integral molding, after quenching, which has stable sizes and good durability..
  • [CEMENTED CARBIDE] Made of cemented carbide material, with high hardness and wear resistance, not easy to deform and corrode..
  • [HIGH EFFICIENCY] With fine grinding flutes, chip removal is smoother without clogging, efficient and labor saving in operation..
  • [UNIVERSAL SHANK] The machine reamer has universal shank design, stable in clamping and not easy to slip or fall off..
  • [APPLICABLE MATERIAL] Suitable for drilling stainless steel, carbon steel, cast iron, die steel, alloy steel, non ferrous metal materials..
Check Stock

Viking Drill and Tool 47462 Type 240-CN Ultra Dex CN-TECH Cryo (29 Piece)

  • Modifies the carbon micro-structure through precipitation of carbides increasing resistance to wear.
  • Nitride process diffuses Nitrogen into the surface to create a case hardening.
  • Superior tool life and exceptional corrosion resistance.
Check Stock