Categories

Best Center Axle

DKKY Aluminum Complete Front & Rear Axle for 1/10 RC Crawler Rock Racer Axial Wraith 90018 90020 90053 (Black)

  • High strength aluminum alloy material.CNC Machined.
  • Anodized Black and Silver.Off-center diamond-shaped pumpkin design.
  • Axle tubes are reinforced with a boxed-in axle truss.
Check Stock

VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating

  • EASY TO USE: Slide flat end of puller through center of bearing and flat against backside of bearing, then slide washer down the center of the shaft against front side of bearing and tighten the nut on smaller end of puller, then thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out.
  • The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage.
  • Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set – Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle.
  • These tools make the job simple and prevent damage to your bearings when pulling.
  • Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings.
  • For removal only, not intended for installation.
  • FITS YOUR CAR: Standard SAE sizes work for most American domestic makes and models.
  • Set includes the following sizes to fit main bearing tube – 1 inch to 1-7/8 inches, 1-5/16 inches to 2-3/8 inches, and 1-3/8 inches to 2-7/8 inches.
  • Sizes permanently laser-etched on tool for easy identification.
  • Each tool fits a basic slide hammer with a 5/8-inch x 18 thread pitch.
Check Stock

Triton 02360-G 2200 Lb Galvanized Snowmobile Trailer Torsion Axle

  • Option to Add Spring and Ubolt Kits Needed to Hang Your Axle.
Check Stock

Nitto NT555RII P315/35R17 93W LL

  • Ideal for use on the drive axle when paired with the NT555G2 on the non-drive axle.
  • Sidewall construction has been modified to improve launch.
  • Large twin center ribs provide a continuous contact patch for dry traction..
Check Stock

Nitto NT555RII 245/50R16 97W

  • Ideal for use on the drive axle when paired with the NT555G2 on the non-drive axle.
  • Sidewall construction has been modified to improve launch.
  • Large twin center ribs provide a continuous contact patch for dry traction..
Check Stock

Grizzly Industrial H3042-20" Spoked Wheel

  • Build your own high-center cart with a set of these 20-Inch spooked wheels heavy-duty construction will handle the roughest terrain ball bearing axle.
  • Heavy-duty construction will handle the roughest terrain.
Check Stock

TRX400EX Rear Axle Carrier Bearings and Seals Kit 1999-2008

  • Kit contains: 2 ball bearings and 2 double lip seals which are positioned in the center axle carrier.
  • Honda TRX400EX Rear Axle Bearings and Seals Kit 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 **Does not fit aftermarket carriers that use wider bearings..
Check Stock

WTB ST Light I29 29er MTB Black Wheelset QR or Thru Axle 15x100 12x142

  • Centerlock hubs on tubeless-ready rims. 29mm inner width is perfect for today's trail and enduro mountain tires. These wheels come with Quick Release Skewers and the adapters needed to make them 15 x 100 and 12 x 142 thru axle! If you'd like, we will change the axle adapters out before we ship. Just leave a note at checkout and we will take care of it for you!.
  • Cassette Body Type: Shimano Dynasys 11 Speed Mountain , Shimano/SRAM 8, 9, 10 Speed Hub/Brake Compatibility: Center-Lock Disc Rim Width (Internal): 29 mm ISO Diameter: 622 / road / 29" Front Axle: 15mm Thru x 100mm , QR x 100mm Rear Axle: 12mm Thru x 142mm , 10x1 Threaded x 135mm Tire Type: Tubeless Ready Clincher Wheel Size: 29" Defined Color: Black 982g Front 1234g Rear.
Check Stock

Teddy Bear Hamster

  • ✔ SAFE - The axle-free design eliminates a dangerous center bar, reducing the risk of fur/tail entanglement, pet wrap-a-round, curvature of the spine, and other injuries..
  • ✔ SILENT - Innovative dual ball-bearings create a whisper-silent spin. Two stainless steel ball-bearings are within the back plate of the wheel, ensuring the wheel glides smooth and silent. The bearings SPIN around the bolt as your pet runs, unlike annoying squeaky wheels on the market that have a center axle that creates friction and noise..
  • ✔ PACKAGE SET - Includes wheel, stand, Sandy Track, and cage attachment washers for easy installation..
  • ✔ IDEAL FOR - Hamsters (Teddy Bear, smaller Syrians, larger Dwarfs / Robos, etc.), Gerbils, Mice, and other similar small animals (not suggested for chewers)..
  • ✔ FAST, FREE SHIPPING in USA! Avg 3 days! ZooPro sells exotic animal food and accessories that are manufactured by Exotic Nutrition Pet Supply Company. Exotic Nutrition has been the industry leader of exotic animal products since 1998, specializing in sugar gliders, hedgehogs, prairie dogs, marmosets, degus, skunks, opossums, chinchillas, rats, hamsters, gerbils, squirrels, rabbits, guinea pigs, rodents, ferrets, chickens, bluebirds, wild birds, monkeys, marsupials, reptiles, am....
Check Stock

Detroit Axle - 11.8" Front Sway Bars Replacement for Chevy Cobalt HHR Malibu Pontiac G6 G5 Pursuit Saturn Aura Ion [W/o RPO Code FE5] - 2pc Set

  • without RPO Code FE5 (Performance Ride Handling Suspension.
  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
  • Kit Includes: 2x Front Stabilizer / Sway Bar End Links.
  • Detroit Axle Suspension Components are Ready to Meet the Rigorous Demands of Today's Foreign and Domestic Passenger Cars, Trucks and SUVs.
  • 10-Year Warranty. Detroit Axle Is a Leading Global Retailer and Distributor of OE Re-manufactured and New Aftermarket Auto Parts.
Check Stock

INJORA RC Axle Metal Front and Rear Portal Axle with Protector for 1:10 RC Crawler Car Axial SCX10 & SCX10 II 90046 90047(Silver)

  • The INJORA Portal Axle creates extreme amounts of ground clearance under the center of your axle..
  • Diamond-shaped pumpkin for increased clearance a more realistic, scale look..
  • Optimized gear ratio – 3.75 compared. This reduces torque twist which is typically seen with other small pumpkin axle designs..
  • Come with protect armor, servo arm, 12mm wheel hex, nuts and screws, easy to install..
  • Hardened steel gears and drive shaft, use all SCX10-II linkage, suit for 1/10 RC Crawler Car Axial SCX10 II 90046..
Check Stock

Invacare 9000 XT High Performance Lighter Weight Wheelchair, With Desk Length Arms, 20\ Seat Width, 9XT_33131, Black Satin

  • FEATURES: The Invacare 9000 XT Wheelchair offers versatility and high performance for users. Adjustable center-of-gravity helps provide a custom fit while urethane casters boast a better, lighter-weight ride. Dual-axle allows for conversion from 19.5" to hemi seat to floor height of 17.5". Offset axle position allows adjustment of center-of-gravity to increase maneuverability or stability to meet each user’s skill level..
  • BUILT TO LAST: All 9000 XT wheelchairs are high performance, low maintenance, and low lifetime cost wheelchairs. The wrap around seat backs have padded nylon upholstery that is comfortable to the user and easy to clean with heavy-duty inner liners to keep seat from stretching ..
  • DIMENSIONS: Dual axel allows adjustable seat-to-floor height from 17.5” or 19.5”, seat width 20.
Check Stock

Invacare 9000 XT Lightweight Long Term Care Folding Wheelchair for Adults, 9XT

  • This Invacare 9000 XT Wheelchair features a lightweight frame with a weight capacity of 250 lbs. The 9000 XT offers versatility and high performance for users. Adjustable center-of-gravity helps provide a custom fit while urethane casters boast a better, lighter-weight ride..
  • This model offers dual axle positions to achieve various seat-to-floor heights to meet individual user needs. Extensive offering of frame and back styles, widths and depths..
  • No flex wheels for superior performance..
  • Urethane casters for lightweight, smooth ride..
  • Dual-axle allows adjustable seat-to-floor height from Adult (19.5”) to Hemi (17.5”)..
  • Adjustable center-of-gravity. Easy-to-clean nylon upholstery..
  • Space-saver arms reduce overall frame width for added convenience. Desk-length arms allow individuals to pull close to a table, desk, or surface. This listing is for the wheelchair only. Front riggings, such as T94HEP / T94HAP / T94HCP / T93HAP / T93HCP / T94HEP, leg rests and foot rests, are sold separately..
Check Stock