Categories

Best Center Grinder

Amacupid Buffing Polishing Wheel 6 inch,for Bench Grinder/Bench Buffer,1/2 inch Arbor Hole,Cotton White (50 Layers) Yellow (45 Layers)-2 Pack

  • Purpose: The cloth wheel is installed in a bench-top buffer or a bench-top grinder. The polishing wax (a certain compound) is sprayed or pressurized into the rotating polishing wheel. The polishing wheel is used as the carrier of the polishing wax (compound) to complete the surface treatment. Mainly used for surface treatment of jewelry, hardware, plastic, glass and metal, which can produce bright luster on metal and composite materials.
  • Installation: Insert the center hole of the polishing wheel into the adaptor rod of the bench buffer or bench grinder, or the pointed shaft, various transfer shafts. Make sure the installation is tight, then start rotating at a low speed, adjusting the speed as needed for polishing.
  • Quality: The polishing wheels used for polishing are all made of high-quality cotton, and the white polishing wheels are soft and delicate, adding smoothness to your items. The yellow polishing wheel throws away surface debris. The cotton cloth is made of a brand new one piece, and the hole is kept in the center position (the poor polishing wheel, the cotton cloth is patchwork, the center hole deviation is large, the rotation is unstable, and the noise is large).
  • Dimensions: Polishing wheel diameter is 6 inch. (150mm), center hole 1/2 inch. ....
Check Stock

Angle Grinder Attachment M14 Adapter 5/8 inch 11 Female to M14 Male 12,000 RPM Rated Wire Wheel Drill Adaptor Compatible with Dewalt, Makita, Milwaukee, Hitachi, Ryobi Tools

  • Heavy-duty, solid steel, commercial grade adapter for using a European attachment (Metric 14) on North American 5/8"-11 angle grinder, grinder saw, concrete angle grinder. 12,000 RPM rated. Female side is 5/8"-11 and male side is M14 threaded. Mortar rake adapter.
  • M14 side is 0.75 inch long. You can use M14 Threaded Mortar Rake, Diamond Tools, masonry hole saw, drill grinder attachment, polishing rake, polisher attachment, diamond wire saw, hole saw drill attachment with your standard American 5/8" 11 threaded power tools..
  • This wheeler angle grinder drill chuck adapter has a water hole in the center for cooling diamond tools, diamond hole saw, diamond core drill bits..
  • If you have a 5/8"-11 standard North American power tool, this american to european adapter will help you use M14 (metric 14) a female threaded wheel polisher drill attachment, diamond core drill bit, hole drill attachment, angle grinding wheel, angle grinder polisher..
  • Standard small hand polisher can utilize this angle grinder arbor adapter or M14 drill adapter for a polishing spindle, metric hole saw, mortar rake..
Check Stock

Porkert Meat Grinder Knife Size #5 Fits Manual Grinder Mincer

  • 1 15/16" tip-to-tip 3/8" center square hole.
  • Fits your Porkert if your round discs are 2 1/16" diameter.
Check Stock

BHA Unmounted Flap Wheel for Bench Grinder, 6\ x 2\ x 1\ (120 Grit)

  • 6 Inch Diameter x 2 Inch Wide Sanding Surface x 1" Diameter Center Hole.
  • For Use on a Bench Grinder or Pedestal Grinder.
Check Stock

Dynabrade 52630 4-Inch Right Angle Depressed Center Wheel Grinder

  • 13 hp Depressed Center Wheel Grinder is ideal for fast weld and stock removal, heavy deburring, plus rust and scale removal.
  • Tool accepts optional 4-Inch (102 mm) diameter Type 27 Depressed Center Wheels with 5/8-Inch (16 mm) center hole.
Check Stock

Stainless Steel Sharp Grinding Cutting Blade Replacement for Food Grinder Attachment #5 Size Work for GVODE KENOME & KITOART 2pcs pack

  • √ Great for cutting meat, fruits and vegetables and bread crumbs.
  • √ ONLY fit #5 Size food grinder attachment, Work for GVODE, KENOME & KITOART brands.Not compatible to Kitchenaid Food Grinder Attachment!.
  • √ Nice design with longer cutting blade that greatly improves the performance of your food grinder..
  • √ Stainless steel, NO RUST guarantee from Gvode.
  • √ Measures: 1.82inch (46.2mm) tip to tip, 0.18inch (4.4mm) thick,0.33inch (8.5mm) square center hole.
Check Stock

Metabo HPT Angle Grinder, 4.5-Inch, 10.5 Amp, Paddle Switch | G12SE3

  • GRINDER: 4-1/2" 10. 5 amp Angle Grinder with Paddle Switch.
  • INCLUDES: G12SE3 Angle Grinder, Wrench, Side Handle, Depressed Center Wheel, Wheel Guard.
  • PADDLE SWITCH: Lock-on/Lock-off paddle switch for ease-of-use over extended periods..
  • GRIP: Smallest grip circumference in its class at 8” offers comfort and control during extended use.
  • TOOLLESS GUARD: new, ultra-secure toolless guard with spring-loaded lever that allows for simple repositioning without having to remove the guard.
  • IMPROVED AIR PATH: Deter dust and prevent potential electronic issues associated with dust & debris.
Check Stock

Dynabrade 52712 Diameter Right Angle Depressed Center Wheel Grinder, 2-Inch 51mm

  • Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
  • 2" Diameter, Right Angle, .4 hp, Rear Exhaust. 20,000 RPM.
  • Includes 90999 Depressed Center Wheel (24 grit), 2" diameter with 3/8" center hole, guard and wheel flange set also included.
Check Stock

Dynabrade 52705 Right Angle Depressed Center Wheel Grinder, 3-Inch 76mm Diameter

  • Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
  • 3" Diameter, Right Angle, .4 hp, Rear Exhaust, 15,000 RPM.
  • Accepts optional 3" diameter Type 27 Reinforced Depressed Center Wheel, with 3/8" center hole (wheel width of 1/8" to 1/4").
Check Stock

Dynabrade 50302 4-Inch Right Angle Depressed Center Wheel Grinder

  • Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
  • 4-Inch Diameter, Right Angle, 1 hp, Rear Exhaust, 12,000 RPM.
  • Accepts optional 4-Inch diameter Type 27 Depressed Center Wheel, with 5/8-Inch center hole (wheel width of 1/8-Inch to 1/4-Inch).
  • Package dimensions:10.25"L x 16.5"W x 3.0"H.
Check Stock

2-Pack meat grinder knife for Back to Basics, Rival, Deni, Waring Pro and others SQUARE center hole. 46 mm long, 3.5 mm thick. PLEASE MEASURE BEFORE PURCHASING. SEE DESCRIPTION

  • Stainless Steel replacement blade for many Back to Basic and Waring Pro meat grinder.
  • Will fit your meat grinder ONLY IF your round discs have two tabs.
  • Very common size for many size #5 meat grinders..
  • NOTE>>>> Your round discs must have the two tabs for this blade to fit.
  • Square center hole. We also have a blade with a HEX center hole. Please confirm.
Check Stock

Pomsare Upgraded 3PCS Wood Carving Disc Set for 4\ or 4 1/2\ Angle Grinder with 5/8\ Arbor, Grinding Wheel Shaping Disc for Wood Cutting, Grinder Cutting Wheel Attachments

  • [Upgraded Design] After checking all the complaints of grinding disc set, our engineer upgraded the center hole diameter to be compatible with 4" and 4 1/2" angle grinder. The grooves of the wood grinder wheel has been enlargerd to fit widely used 1.61" black flange nut. So all the parts work right out of the box..
  • [Fit 4" or 4 1/2" angle grinders with 5/8" & 7/8" Arbor] The angle grinder attachments set includes 3 piece of wood grinding wheel (4" dia × 7/8" bore), 3 piece of silver bushing(7/8" to 5/8"). Designed to be used in all standard 4" or 4 1/2" angle grinders with 5/8" as well as M10 arbor, such as Makita, Bosch, Dewalt, Black & Decker, Milwaukee, Hitachhi & more..
  • [Cope with Different Occasions] Hundreds of aggressive teeth of the wood grinder wheel can remove paint residue and rotted wood to smooth the surface of old furnitures. More durable than hundreds of sandpapers, save energy and improve work efficiency..
  • [Practical Woodworking Tools] With rapid polishing and grinding speed, the grinder shaping disc is great for non-metallic materials, suitable for soft and hard wood, chipboard, laminate even plastic, without worrying about kickback. Ideal for grinding, sculpting, carving, and removing small tree stumps..
Check Stock

Dynabrade 50303 4-1/2-Inch-5 Inch Vertical Depressed Center Wheel Grinder

  • Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
  • 4-1/2-Inch- 5-Inch Diameter, Vertical, 12 hp, Side Exhaust, 12,000 RPM.
  • Accepts optional Type 27 Depressed Center Wheel in diameters of 4-1/2-Inch and 5-Inch, with 7/8-Inch center hole (wheel width of 1/8-Inch to 1/4-Inch).
  • Package dimensions:10.25"L x 8.25"W x 6.75"H.
Check Stock