Best Center Punch And Chisel Set

Punch And Chisel Set, 16 Pieces- Includes Taper Punches, Cold Chisels, Pin Punches, Center Punches, Chisel Gauge, and Storage Case- By Stalwart

  • ... SET INCLUDES-  The 16-piece set consists of 5 taper punches.
  • 3/32”x5 1/4”, 1/8”x 5 ¾”, 5/32”x6”, 3/16”x 6 ¼”, 1/4”x 6 ¾”. 3 Cold chisels: 3/8”x 5 ½”, 1/2”x 6”, 5/8”x 6 ½”. 5 Pin punches.
  • 3/32”x 4 ¼”, 1/8”x 4 ¾”, 5/32”x 5”, 3/16”x 5 ¼”, ¼”x 5 ¾”. 2 Center punches.
  • 1/8”x5”, 3/16”x 6” and 1 chisel gauge. Hardness 54~58 HRC..
  • SATISFACTION – Stalwart is committed to providing consumers with the absolute best price and value on our entire line of products. NOTE: This is an exclusive product of Stalwart and ONLY Chisel and Punch Sets by Stalwart are to be genuine.
Check Stock

Amazon Basics 16-Piece Chrome Vanadium Steel Punch and Chisel Set with Storage Pouch

  • 16-piece woodworking punch and chisel set includes 3 cold chisels, 5 taper punches, 5 pin punches, 2 center punches, and 1 chisel punch gauge.
  • Heat treated, chrome vanadium (Cr-V) alloy steel construction.
  • Comfortable handles reduce hand strain and improve accuracy.
  • Storage pouch with velcro closure keeps tools organized and secured.
Check Stock

SEDY 16-Piece Punch and Chisel Set, Including Taper Punch, Cold Chisels, Pin Punch, Center Punch

  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
  • Product material: made of Chrome Vanadium Steel, hardness: 54~58HRC. Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1/4" x 6-3/4".
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4".
  • 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2".
Check Stock

GEARWRENCH 27 Pc Punch and Chisel Set - 82306

  • Chisel For Cutting Rivets, Bolts, and Nuts.
  • Pin Punch For Final Removal To Drive Out Pins and Rivets.
  • Center Punch For Marking Center Lines and Pilot Drill Locations.
  • Long Taper Punch To Install and Remove Pins and Shafts and To Align Holes.
  • Starter Punch For Both Starting and Installing Pins and Rivets.
Check Stock

ABN Large Brass Punch Set 2pc - Brass Drift Punch Set Automotive Chisel Punches Kit Large Brass Tools for Mechanics

  • [Punch Holes with Ease]: The ABN Punch Tool Set 2pc will allow you to create holes in your automotive projects without sparks or cracks.
  • [For Your Metals]: Drilling holes in thin metal can cause the metal to bend, crack, and break.
  • Punch set brass kit lets you create clean holes without damaging the metal.
  • [Quality You Need]: Brass construction prevents breakdown while in use.
  • Use big brass punch kit with your hammer or mallet (not included) to break through without marring the material.
  • [Chisel and Punch]: Brass punch large punches set includes 2 punches for your needs.
  • Use the chisel punch to create square-shaped holes, solid punch to create round  holes.
  • [Measurements]: Chisel punch measures 8 inches (20cm) long with 5/8-inch (1.5cm) hex that tapers to 3/8-inch end.
  • Round punch measures 10 inches (25cm) long, 3/4 inches (1.9cm) in diameter, chamfered at both ends.
Check Stock

HORUSDY 16-Piece Punch and Chisel Set Including Taper Punch Cold Chisels Pin Punch Center Punch

  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts....
  • Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1 /4" x 6-3/4" and 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x....
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4" and 2PC Center punch: 1/8" x 5", 3/16" x 6".
  • Product material: made of chrome vanadium steel, hardness: 54~58HRC.
Check Stock

SWANLAKE Punch and Chisel Set Including Taper Punch Cold Chisels Pin Punch Center Punch 16pcs

  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
  • Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1 /4" x 6-3/4" and 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2".
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4" and 2PC Center punch: 1/8" x 5", 3/16" x 6".
  • Product material: made of chrome vanadium steel, hardness: 54~58HRC.
Check Stock

Williams JHW28449 Punch and Chisel Holder

  • Soft steel safety head is similar in hardness to brass.
  • Ideal replacement for Brass head where non-sparking is not required.
Check Stock

Chiloskit 28 pc 3/32\ - 1/2\ Transfer Punch Set Machinist Tools Punches Machinist Thread Kit

  • 28-pc. CENTER PUNCH Set Steel Transfer Punch Machinist Thread Tool Kit Set.Heat treated, carbon steel construction.Black oxide finished for durability..
  • EASY TO USE: Select one of the punches, hold punch shaft with one hand while gently tapping a hammer (not included) on the flat top of the punch to make a mark on your selected material that is visible for your center punch, then use your existing center punch (not included) to make a dimple.
  • Eliminates guesswork when transfering threaded, drilled or reamed holes in sheet metal..
  • Eliminates the guesswork when transferring punches through holes.A transfer punch set is a punch set in an index with a specific outer diameter that is non-tapered and extends the entire length of the punch, except for the tip. It is used to tightly fit the tolerances of an existing hole and when struck precisely transfers the center of that hole to another surface..
  • 4-7/8" long: 3/32" to 1/2" by 1/64" increments, handy 17/32"punch.
Check Stock

LIVTE 6Pcs Cold Chisel Set, Durable Steel Flat Chisel-Flat Chisel, Cone Chisel, Center Chisel, Cylindrical Chisel with Canvas Bag, Heavy Duty Chisels Set for Brickwork, Concrete, Metal, Stone,etc

  • ✅【THE VALUE OF LIVTE】At LIVTE, we only use the highest-grade materials. Made from precise forging chromium vanadium alloy steel, painted with anti-rust oil, the cold chisel set owns high hardness and long service life..
  • ✅【PREMIUM QUALITY】The chisel set are made of CR-V chrome vanadium steel with HRC58 hardness, ensure durability rust resistance..
  • ✅【PRECISION GROUND BLADE】The blade is provided with a 30 ° bevel with maximum sharpness and ground..
  • ✅【MULTI-PURPOSE CHISEL SET】3 octagonal flat cold chisels of varying sizes are included for carving woodwork, masonry work, chipping brickwork, concrete, metal, and more..
  • ✅【WHAT YOU GET】Chisel Set includes 3 flat chisels, 1 Center Chisel, 1 Center Chisel, 1 Cylindrical Chisel,a FREE canvas bag.In addition, LIVTE promises a 30-day money back guarantee..
Check Stock

ABN Spring Loaded Center Punch, Automatic Center Punch Tool – Auto Center Punch, Awl Punch Hole Punch Tool, 5in

  • EASY TO USE SPRING PUNCH TOOL: Put away your hammer, pilot, and center drill and instead use the ABN Center Punch Spring Loaded Nail Setter Tool to make or mark the center of a hole you wish to create.
  • Press down on the nail set tool until the tip of the hammer nail fully retracts into the handle, the spring-loaded trigger will release, and the blade of the metal punch tool will mark the workpiece.
  • FITS YOUR PROJECT: Nail spring tool marks your workpiece with a dimple to give you a starting point that prevents screws and drills from wandering.
  • Use this automatic center punch for metal, wood, glass, canvas, plastic, and leather materials.
  • Use this spring loaded center punch glass break window breaker to enter a car in emergencies or use as a spring loaded awl for your belts or purses.
  • ADJUST FOR ACCURACY: Spring-driven action with adjustable strike force makes punching easier with this simple to use nail punch tool drill marker.
  • Increase and decreased the stroke for higher or lower impact by tightening and loosening the adjustable cap on the nail set punch nail hammer tool.
  • BUILT TO LAST: Center hole punch shank body is constructed from chrome-plated steel for maximum strength and longevity that allows for high impact force and resists corrosion.
Check Stock

NEIKO 02623A Cold Chisel and Punch Set | 12 Piece | Cr-V Steel | Remove Pins and Bushings | Cut or Split Steel Objects

  • [PREMIUM]: This chisels in this set come with tempered tips that are hardened for extra sharpness making it a great addition to your tool collection cutting or shaving..
  • [QUALITY]: The heavy-duty cold chisel set is constructed from drop forged chrome vanadium steel for extra strength and durability that will ensure the longevity and long-lasting service life of this tool set at home or job..
  • [VERSATILE]: This set is great for craftsman and includes a variety of chisels and punches for a wide variety of work including marking, punching, scoring, and more..
  • [CONVENIENCE]: This tool set comes in a heavy-duty canvas pouch that neatly rolls away to save space and keep your tools organized in your toolbox..
  • [INCLUDES]: Six cold chisels, three taper punches, two center punches, and one pin punch that are all hex shaped for great grip under hammering..
Check Stock

Swingline Desktop Hole Punch, Light Touch Metal Hole Puncher with Adjustable System for 2-7 Holes, Low Effort Paper Punch, Home School & Staples, Standard, 1/4 inches Length, 210/Strip, 5000/Box

  • Product 1: REDUCED EFFORT – Soft-touch lever requires 50% less manual force than traditional desktop punches..
  • Product 2: RELIABLE PERFORMANCE – Swingline staples set a higher standard for reliable performance over comparable staples. Convenient staples help you stay organized..
  • Product 2: CHISEL POINT FOR FEWER JAMS – Sturdy staples are constructed to quickly pierce paper with sharp chisel points. Designed to prevent jams and ensure smooth workflow..
  • Product 2: SECURES 25 SHEETS OF PAPER – These staples serve a variety of typical fastening needs. With a ¼” leg length, they can hold up to 25 sheets of paper, making them a perfect choice for most projects..
  • Product 2: 5,000 STAPLES – Includes one box of 5,000 staples. Each strip has 210 staples, allowing you to keep on stapling through long projects without running out..
Check Stock