Categories

Best Centre Drill

A29 Cabin Hook, 2 3/4 inches Brass Latch, Cabin Door Gate Latches, Window Sash Catch Hook Lock Barn Door Locks and Latches, Antique Brass Finish

  • ...providing years of effortless rolling and durability. They features a sturdy brass construction that can be screwed directly into door. It also has a primitive character making the hook even more long lasting. Sold as each.
  • DIMENSIONS: The dimensions of the cabin hook are as follows, Over all length : 2 3/4 inch and centre to centre screw hole is 2 inch . The pack includes screws as well which will help you secure the cabin hook safely..
  • ANTIQUE BRASS FINISH: This cabin hooks consists of ANTIQUE BRASS FINISHING. Keeping the hooks look pristine for as long as you need them also adds a natural shine to them..
  • WIDE SCOPE UTILITY: This cabin hook can be used in many places like: sliding barn doors and french doors, latch for your interior doors, garden gates further adding an extra edge to your decor..
  • EASY QUICK INSTALLATION: Includes mounting hardware such as screws STEPS TO INSTALL : For fixing screws on any wooden surface, mark and drill pilot holes with a drill bit appropriate for the mounting hardware. Put a drop of oil on the screw tip, insert and tighten the screw. Do not over torque the screw as it may break. If the item is being fixed on a hard surface, a wall anchor may be required. These are available at hardware stores..
Check Stock

Forstner Bit Set, 5-Piece Forstner Bits Wood Drilling Smooth Flat-Bottomed Pocket Holes in Hard Soft Wood, 3/8" Shank Fit Drills and Drill Presses, Size 1”, 1-7/64”, 1-1/4”, 1-3/8”, 1-1/2"

  • 1, Position and Mark the Workpiece and test if it’s even.
  • 2, drill at recommended RPMs 1200~1500 and retract the bit often to cool it.
  • 3, Lower the drill press speed when finish the hole.
  • Cut with handheld drills requires patience and power: 1: Clamp Material, Mark Centre Point & Align Drill.
  • 2: Start Drilling at a slow speed, holding the drill firmly to avoid bit walking. an auxiliary handle will help. 3: Increase the drill’s speed, retracting the drill to remove chips.
Check Stock

M42 HSS Hole Saw Set, Ankoow 9Pcs 16-38mm Heavy Duty Hole Saw Tooth Cutting Opener Drill Bit for Wood Aluminum Iron Sheet Pipe Plastic

  • ❤ [9 SIZES HOLE SAW IN 1 SET]: 16mm, 18mm, 20mm, 22mm, 25mm, 30mm, 32mm, 35mm, 38mm. Each drill is individually packaged for easy carrying and finding the required specifications..
  • ❤[HIGH-QUALITY MATERIALS]: Hole saw set made of M42 HSS steel and BI metal, the blade is sharp with high hardness, stronger wear resistence and long service life..
  • ❤ [WIDE APPLICATION]: Suitable for Pistol Drill, Bench Drill,Vertical Drilling Machine etc. Widely used in Plate Hole, Home Wood, Galvanized Pipe, Fire Pipe, Plastic, Soft metal, Gypsum Board and Other Opening Operation. NOTE: Not recommend used in hard wood, hard metal and stone..
  • ❤ [SMOOTH AND FAST CUTTING]: Teeth are sharp with little vibration, pressurized spring Improves the removal speed of cylindrical iron filler in the hole and makes chip evacuation easier. And the hole can be quickly balanced, making the operation more stable..
  • ❤ [WARM TIPS]: Keep the drill be stable when drilling, the larger the hole saw is, the slower the drill rotary speed should be, this way can protect the centre bit from getting snapped. And we recommend that customers use cutting fluid to keep the hole saw cold during use to prevent overheating, damage or even burned up..
Check Stock

Amerdeco 10 Pack Brushed Satin Nickel Cabinet Pulls 4 Inch Hole Centers, 5 Inch Length Handles for Kitchen Cabinet Hardware,Solid Cabinet Handles for Bathroom Drawer Handles IH0005…

  • High quality: made of solid zinc alloy, strong, durable and easy to install. Also has good appearance and fine touch..
  • If you are replacing a pull, measure the centre to centre distance of the hole in your current pull and select the corresponding hole spacing for the pull.
  • if installing a new cabinet pull, drill two holes with a 4 inches spacing.
  • Wide Application: Perfect for cabinet, closet, cupboard, drawer, dresser, door, wardrobe. You can have fun with DIY and make your furniture look new.
  • Measurement: Hole Centers(CC):4 inch(102MM).
  • Please check the Size of handles you require carefully before purchasing..
  • 120 Days After-Sales Guarantee: Amerdeco is committed to bringing high quality handles to our customers and will replace or give you a full refund if any quality issues arise within 121 days..
Check Stock

Bestgle 12pcs T5-T40 Torx Head Screwdriver Bit Set 1/4 Inch Hex Shank Security Tamper Proof Magnetic Torx Bit Screw Driver Kit Tool, 50mm

  • 1/4 Inch Hex Shank Torx Head Bit Set, Made of high-strength S2 Alloy steel, good toughness, hard to rupture and wearproof.
  • 12 Torx Sizes: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40.
  • Please Note: All torx screwdriver bits have a centre bore except the size of T5 T6 and T7.
  • Strong Magnetic torx bit, easy to suck the screw and firmly fixed on pneumatic screwdrivers, electric screwdriver or rechargeable drill.
  • screwdrivers, electric screwdriver or rechargeable drill Widely used on power tools, electric screwdriver assembly, electronics industry, household appliances, precision instruments industry, furniture industry screw equipment.
Check Stock

Black Wrought Iron Gate Ring Turn Latch Lock Set 6.5\ W Light Duty Antique Latch Replica Pull Catch for Barn Doors Or Gates with Mounting Hardware Renovators Supply Manufacturing

  • DURABLE MATERIAL - This black barn door gate latch is made of wrought iron material and spindle bar is of steel. Recommend indoor use or apply protective coating for outdoor use..
  • MEASUREMENTS - The Latchbar length = 6.5 Inches, Turn pull ring backplate width = 5 Inches, Projection = 2 Inches, Spindle Bar = 3 Inches. Opens/Closes = Both the direction, Left or Right!.
  • PACK INCLUDES - Black pull ring drop with flip latch strap, single pull ring, a spindle bar, two Latch bar pieces and the mounting hardware. Included screws are intended for indoor use..
  • EASY INSTALL - Place latch on gate, mark all screw holes, mark centre of ring drop, drill centre, insert spindle bar via central hole and connect it to both of the ring drops to function together, install latch using the given screws, and its done!.
  • BUY WITH CONFIDENCE - These door flip latches are carefully packed to avoid any damage in the transit process. We offer you great value products for your money and a perfect way to spend wisely..
Check Stock

Black Wrought Iron Gate Turn Latch Lock Set 6.5 Inches W Heavy Duty Rust Resistant Powder Coated Barn Door, Fence Or Gate Ring Latches with Mounting Hardware Renovators Supply Manufacturing

  • DURABLE MATERIAL - This barn door gate latch is made of heavy duty industry standard wrought iron material and spindle bar is of standard mild steel. Our exclusive black baked rust resistant powder coating protects the door latch from rust..
  • MEASUREMENTS - The Latchbar length = 6.5 Inches, Turn pull Drop Backplate Width = 2.5 Inches, Projection = 3 Inches, Overall Width = 4 Inches, Spindle Bar = 3 Inches. Opens = Both the direction, Left or Right!.
  • PACK INCLUDES - Black Pull ring drop with flip latch strap, single pull ring, a spindle bar, two Latch bar pieces and the mounting hardware..
  • EASY INSTALL - Place latch on gate, mark all screw holes, mark centre of swing drop, drill centre, insert spindle bar via central hole and connect it to both of the swing drops to function together, install latch using the given screws, and its done!.
  • BUY WITH CONFIDENCE - These sturdy farmhouse gate flip latches are carefully packed to avoid any damage in the transit process. We offer you great value products for your money and a perfect way to spend wisely..
Check Stock

Black Wrought Iron Gate Ring Turn Latch Lock Set 6.5\ W Light Duty Antique Latch Replica Pull Catch for Barn Doors Or Gates with Mounting Hardware Renovators Supply Manufacturing Pack of 2

  • DURABLE MATERIAL - This black barn door gate latch is made of wrought iron material and spindle bar is of steel. Recommend indoor use or apply protective coating for outdoor use. Pack of 2.
  • MEASUREMENTS - The Latchbar length = 6.5 Inches, Turn pull ring backplate width = 5 Inches, Projection = 2 Inches, Spindle Bar = 3 Inches. Opens/Closes = Both the direction, Left or Right!.
  • PACK INCLUDES - Black pull ring drop with flip latch strap, single pull ring, a spindle bar, two Latch bar pieces and the mounting hardware. Included screws are intended for indoor use..
  • EASY INSTALL - Place latch on gate, mark all screw holes, mark centre of ring drop, drill centre, insert spindle bar via central hole and connect it to both of the ring drops to function together, install latch using the given screws, and its done!.
  • BUY WITH CONFIDENCE - These door flip latches are carefully packed to avoid any damage in the transit process. We offer you great value products for your money and a perfect way to spend wisely..
Check Stock

Solid Brass Gate Ring Turn Latch Lock Set 7.25\ L Heavy Duty Twist Latch Replica Pull Catch for Barn Doors Or Gates with Mounting Hardware Lacquered Brass Finish Renovators Supply Manufacturing

  • DURABLE MATERIAL - This bright brass polished barn door and gate latch is made of heavy duty solid brass material. The spindle bar is of standard steel. Exclusive tarnish resistant lacquered finish increases its life for many years..
  • MEASUREMENTS - The Latchbar length = 7.25 Inches, Turn pull ring backplate width = 2.5 Inches, Projection = 1.75 Inches, Spindle Bar = 4 Inches. Opens/Closes = Both the direction, Left or Right!.
  • PACK INCLUDES - Brass pull ring drop with flip latch strap, single pull ring, a spindle bar, two Latch bar parts and matching the mounting hardware..
  • EASY INSTALL - Place latch on gate, mark all screw holes, mark centre of ring drop, drill centre, insert spindle bar via central hole and connect it to both of the ring drops to function together, install latch using the given screws, and its done!.
  • BUY WITH CONFIDENCE - These door flip latches are carefully packed to avoid any damage in the transit process. We offer you great value products for your money and a perfect way to spend wisely..
Check Stock

AUTOTOOLHOME Dowel and Tenon Center Transfer Plugs Point 1/4", 5/16", 3/8" and 1/2" Set of 8

  • Accurately transfers dowel holes Wood Timber Marker Hole Align Center Transfer Plugs.
  • Internal centering pin locates center of dowel for accurate drilling.
  • Scribe point transfers mark for accurate drilling position Dowel Drill Centre Point Set.
  • Set includes eight pieces -- two of each size 1/4", 5/16", 3/8" and 1/2" diameter,with storage case.
  • Steel centers for durable marking performance.
Check Stock

WEISHUJI Universal Stainless Steel Centre Drive Shaft, Stainless Steel Centre Drive Shaft, Stainless Steel Drive Shaft 140-250mm for Tamiya RC4WD D90 SCX10 SCX0016 Off-Road RC Crawlers Car

  • Universal Stainless Steel Centre Drive Shaft is compatible with HSP 94180 RC 1:10 racing climbing rock crawler, Stainless Steel Drive Shaft is also compatible with Axial SCX10 Electric 4WD RC Car..
  • Universal Stainless Steel Centre Drive Shaft length range is 140mm-250mm, Stainless Steel Centre Drive Shaft Hole Size is approx 5mm/0.20inch..
  • Universal Stainless Steel Centre Drive Shaft General Diameter is approx 12mm/0.47inch..
  • Universal Stainless Steel Centre Drive Shaft Axle Body Diameter is approx 10mm/0.39inch..
  • Package of Universal Stainless Steel Centre Drive Shaft includes: 1 x Stainless Steel Centre Drive Shaft.
Check Stock

Ancable 1M Large 8 Pin Din Male-Male Speaker Audio Cable Wire for Bang & Olufsen B&O BeoLab PowerLink MK2, Peavey Sanpera Pedal and Monster Clarity HD Model One

  • Fully wired DIN 8 PIN cable, good quality, heavy duty, length 1m.
  • This cable could be used to connect the Sanpera II Footswitch to Peavy Vypyr 2 Amp.
  • This cable could be used as the speaker cable on Monster Clarity HD Model One.
  • This Powerlink mk 2 cable allows you to connect Beolab active loudspeakers with or without displays to your Bang and Olufsen hifi system or television surround sound,it fits almost all B&O audio systems and TVs manufactured since 1990.Compatible with:Beolab 1 Beolab 2 Subwoofer Beolab 3 Beolab 4 Beolab 5 Beolab 7.1 Centre Speaker Beolab 7.2 Centre Speaker Beolab 7.4 Centre Speaker Beolab 7.6.
  • Centre Speaker Beolab 9 Beolab 10 Centre Speaker Beolab 11 Subwoofer Beolab 2500 Beolab 3000 (including display) Beolab 4000 Beolab 4500 (including display) Beolab 5000 (including display) Beolab 6000 Beolab 6002 Beolab 8000 Beolab 8002 Beolab Penta mk.2/mk.3 (including display) Also for Beolink MCL2P link room box and for Beolink Passive link room box.
Check Stock

ADINTERNATIONAL HV6-4 Slots Rotary Table With Steel Dividing Plates Set with Operation Manual Precision Quality Rotary Table Milling Vice Vise Machine Tools

  • Rotary Table Diameter :150 mm (6") Overall Height : 80 mm ( 3-1/4") Centre Height in Vertical Position: 105 mm.
  • Centre Bore of the Table: 2 MT 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. Can be clamped in....
  • More Information about the Dividing Plate :- Set of 3 dividing plates designed to fit our HV4 & HV6 Rotary Tables. Centre Hole of the Plate is 21 mm....
  • A set of Steel Dividing Plates for Indexing with all required Accessories..
Check Stock