Categories

Best Centrifugal Compressors

Amsoil Slip Lock Limited Slip Additive

  • This is a high quality synthetic lubricant specifically designed to meet the rigorous demands of industrial compressors.
  • Up to 8 Times the service life of mineral oils..
  • This oil is a premium synthetic, ashless, non-detergent, air compressor oil.
  • This is commonly used with reciprocating compressors, rotary vane compressors, pressure washer pumps, and vacuum pumps..
Check Stock

Globe Scientific GCC-MP-Swing, Swing-Out Rotor for GCC-MP Series Multi-Purpose Clinical Centrifuges, Aluminum Alloy, 4-Place for Buckets

  • Product Introduction:This electric motor centrifugal switch is 100% brand new and high quality..
  • Application:This centrifugal switch fits for 90.100 electric motor of YC/YL series..
  • 19mm Bore: The bore diameter of stand is 19mm..
  • Safe to Use:This electric motor centrifugal switch can help start electric motor safely..
  • Quality Material:This electric motor centrifugal switch is made of good quality material, durable for long time use..
Check Stock

Electric Centrifuge Machine Lab Centrifuge 6x20ml 4000rpm for Serum/Fat Separator PRF Extractor 110V US Plug

  • [PARAMETERS] Capacity: 6x20ml, speed: 0-4000rpm, relative centrifugal force: 1920xg, voltage: 110V, timing: 0-999min..
  • [TIMING&SPEED CONTROL] 0-4000rpm speed is adjustable, 0-999min timing, please adjust the time and speed according to your needs..
  • [LCD DISPLAY] Real-time display of speed and time on the digital display screen, you can check the remaining time during work..
  • [TRANSPARENT COVER] The transparent cover is convenient for observing the centrifugal effect, and has the function of opening the cover. After the cover is opened, the machine will stop rotating immediately..
  • [NOTE] The test tube capacity of this centrifuge is 20ml, and the actual centrifugal capacity should not exceed 80% of the test tube capacity. This is the best centrifugal effect..
Check Stock

Klein Tools 56117 Premium Synthetic Wax Wire and Cable Pulling Lubricant, 1-Quart Squeeze Bottle

  • increased load-bearing capacity, beyond 800-1000% higher than most conventional compressor oils.
  • thick, high durability film strength to prevent metal to metal contact even in high operating temperatures conditions.
  • offers both high temp continuous operation capabilities and arctic grade - 50 F.
  • multi viscosity keeps fluid requirements at a minimum eliminating the need for lower or higher viscosity oils due to temperature range.
  • Works exceptionally well on rotary, vane, screw, and reciprocal air compressors in severe service with high compression temperatures and long operating hours.
  • High purity base oils with top tier detergent pack guaranteed sludge free operation and exceptionally clean equipment.
  • exceptional bearing protection eliminates bearing vibrations and polish.
  • dramatically prolongs component life far beyond ordinary lubricants.
  • Not recommended for breathing air pumping compressors, oxygen compressors, or LPG compressors fitted on natural gas pipelines..
Check Stock

Flexzilla Pro Piston Air Compressor with Silencer, 1-Phase, Stationary, 10 HP, 80 Gallon, 2-Stage, Vertical, ZillaGreen - FXS10V080V1

  • All Flexzilla air compressors feature low RPM pumps and motors that reduce high frequency noise levels while increasing CFM output..
  • Flexzilla stationary air compressors includes the silencer, a patented noise cancellation system that reduces low frequency noise levels..
  • Flexzilla air compressors are among the quietest compressors on the market. Emitting operating noise no louder than a normal conversation..
  • Cool Flow Technology – Industry exclusive. We raise the pump to allow air movement, adding an extra cooling feature and extending life.
  • Exclusive 1-Phase up to 10 HP! – We are the only manufacturer with the expertise to build a 1-Phase compressor up to 10 HP. This industry exclusive delivers up to 39 CFM!.
Check Stock

Centrifugal Blower Fan Air Mover 1354 CFM Centrifugal Extractor Fan Blower 300W 1450 RPM Industrial High Velocity Ventilation Fan Air Exhaust Vent Cooling Radial Centrifugal Flow Blower

  • 【HIGH QUALITY CENTRIFUGAL FAN】PP250 centrifugal blower fan, is made of high quality PP (Polypropylene) material, non-toxic and tasteless, environmentally friendly and healthy. Corrosion resistance, wear resistance, high temperature resistance, durable and long-lasting, very suitable for laboratory ventilation cabinets..
  • 【HIGH WORKING EFFICIENCY】Working method of centrifugal, 1354 CFM air flow, 260 Pa hydrostatic pressure, 40 db noise, with suction and low noise. Reliable and durable, suitable for long-term ventilation work..
  • 【LARGE SUCTION & LOW NOISE】With large suction and low noise, this ventilator exhaust fan is very suitable for chemical gas anti-corrosion fans such as laboratory fume hoods, ventilation medicine cabinets, medicine cabinets, and chemical cabinets..
  • 【HIGH-OUTPUT BLOWER FAN】High-output fan design, large suction, provides a large capacity of 134 cubic meters per minute. Constructed by sturdy shell, compact design, small size, easy to carry, easy to use and store..
Check Stock

Centrifugal clutch Go kart clutch Predator 212 clutch 3/4" Bore 10 tooth with bolt Compatible Predator 212cc 196CC & GX160 GC160 Up to 6.5 hp Engine

  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit 212cc 196CC 2hp-7hp Engines.
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit GC160, GC190, GX120, GX140, GX160, GX200 2hp-7hp Engines..
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit B&S Tecumseh 2-6.5 HP and with 3/4” with 3/4" Bar Shaft and 3/16" Key Way engines..
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15" Tall..
Check Stock

Centrifugal clutch Go kart clutch Predator 212 clutch 3/4" Bore 12 tooth with bolt Compatible Predator 212cc 196CC & GX160 GC160 Up to 6.5 hp Engine

  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit 212cc 196CC 2hp-7hp Engines.
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit GC160, GC190, GX120, GX140, GX160, GX200 2hp-7hp Engines..
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit B&S Tecumseh 2-6.5 HP and with 3/4” with 3/4" Bar Shaft and 3/16" Key Way engines..
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15" Tall..
  • Go Kart Clutch kit：Clutch and bolt & hexagonal wrench.
Check Stock

Desktop Electric Lab Laboratory Centrifuge Machine Lab Medical Practice w/Timer and Speed Control,Low Speed,Capacity 20 ML x 6-110v,4000 RPMby CALU LUKY

  • Centrifuge Machine -Time Rang:0~60min or without limit. Maximum relative Centrifugal force: 1790×g. Electric current:AC110V 60 HZ. Capacity:20ml×6.
  • Maximum speed: 4000r/min.6 Tubes are provided in this lab centrifuge, the centrifugal capacity is 20ml per tube, benefitting your workflow efficiency.
  • Widely Used:Table-centrifugal machines are widely used in the laboratory or produce department for organisms、 medical、 chemistry etc. Our lower....
  • Lab Benchtop Centrifuges:Please insert the tubes into the machine symmetrically, or will not work properly in an asymmetric state.It has 3 adjustable....
  • Easy to Install:Centrifugal machine is easy to use with its clear control panel for controlling the speed and time. bench-top centrifuge is equipped....
Check Stock

Electric Centrifuge Machine Lab Centrifuge 8x20ml 4000rpm for Serum/Fat Separator PRP Extractor 110V US Plug

  • [PARAMETERS] Capacity: 8x20ml, speed: 0-4000rpm, relative centrifugal force: 1920xg, voltage: 110V, timing: 0-999min.The test tube capacity of this centrifuge is 20ml, and the actual centrifugal capacity should not exceed 80% of the test tube capacity. This is the best centrifugal effect..
  • [TIMING&SPEED CONTROL] 0-4000rpm speed is adjustable, 0-999min timing, please adjust the time and speed according to your needs..
  • [LCD DISPLAY] Real-time display of speed and time on the digital display screen, you can check the remaining time during work..
  • [TRANSPARENT COVER] The transparent cover is convenient for observing the centrifugal effect, and has the function of opening the cover. After the cover is opened, the machine will stop rotating immediately..
  • [Satisfactory service] We provide a one-year warranty period, if you have any questions after receiving the goods, please contact us directly. We will give you a satisfactory answer within 24h..
Check Stock

QWORK Centrifugal Casting Crucible, 2 Pack Zirconia Casting Cup Machine Crucible Hooded for Dental Lab, Over 200 Times of Use

  • High quality: QWORK Casting Cup made of fused silica and high-quality zirconia..
  • High efficiency: Can be used more than 200 times by centrifugal casting machine, can be used about 20 times by high-frequency casting machine..
  • Note: It is recommended that the melting temperature is not higher than 1371 degrees Celsius or 2500 degrees Fahrenheit..
  • Widely used: Suitable for replacing the ceramic crucible of the centrifugal casting machine..
  • Package include: 2 Pack Centrifugal Casting Crucible..
Check Stock

ECCPP A/C Compressor Clutch CO 11200C 2008-2013 for N-issan Rouge 2.5L

  • AIR CONDITIONING COMPRESSORS PARAMETER - OE CO 11200C, 92610JM01C, 141004C, 141004NC, 141004NEW, 10347900, 98490.
  • VEHICLE COMPATIBLE - A/C Clutch fits for 2008-2013 for ​N-issan Rouge 2.5L.
  • MAIN FUNCTION - Compressors are the heart of the air conditioning system, responsible for transporting A/C refrigerant throughout the automobile's A/C system.
  • PREMIUM FEATURES - High Quality Replacement Part, 100% Brand New and tested prior to leaving the factory, air conditioning compressors assembly is backed by industry leading warranty.
  • SERVICE WARRANTY - 1 year warranty, support replace, return and refund service.
Check Stock

L20-202Y 20mm Electric Motor Centrifugal Switch, Electric Clutch Controller Parts 3000RPM

  • Motor centrifugal switch: Shaft diameter 20mm, 3000RPM..
  • Advantages: Helps to start the motor safely and quickly. Easy to install and easy to use..
  • Model: The number behind the model L of the centrifugal switch is the size of the large round hole and the size of the motor shaft. For example, L20-202Y, the shaft diameter is 20mm..
  • The difference: The centrifugal switch is divided into a centrifuge and a bottom plate, and the bottom plate is mainly at a different contact position..
  • Friendly Tips: There are two levels and four levels. The two levels are 3000RPM, the numbers are 2.
  • the fourth level is 1500RPM, and the number ends with 4..
Check Stock