Categories

Best Ceramic Abrasive Grinding Wheels

15\ Buffing Wheel Rake for Compound Cleaning

  • 【Abrasive Buffing Wheel Set】25 mm abrasive wheel with 3 mm silver shank and 5 different grits, Brown 120Grit, Green 180Grit, Red 320Grit, Black 400Grit, Gray 600Grit, each grit 20 pieces, total 100 pieces..
  • 【Size】Shanks are 1/8 inch (3mm), buffing wheels are 1" in diameter, 25 mm abrasive wheel.
  • 【Repair The Dents】Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for all types of detail work in both hard and delicate materials..
  • 【Convenient And Practical】 Small buffing wheel is an efficient polishing tool of metal and non-metallic materials in small area of rust deburring and surface polishing, high efficiency, low cost.,used with most rotary tools.
  • 【Widely Applications】Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a tool, fit for rotay tools grinder etc.Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.
Check Stock

60 Pack Abrasive Wheels, Rocaris 1“ Abrasive Buffing Polishing Wheels Burr for Rotary Tools-1/8\ Shank，Polishing bits

  • 【Abrasive Buffing Wheel Set】1“ abrasive wheel with 1/8" silver shank and 6 different grits, Brown 120Grit, Green 180Grit, Red 320Grit, Black 400Grit, Gray 600Grit, White 1000 Grit.
  • 【Size】Shanks are 1/8 inch, buffing wheels are 1 inch in diameter abrasive wheel.
  • 【Repair The Dents】Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for all types of detail work in both hard and delicate materials..
  • 【Convenient And Practical】 Small buffing wheel is an efficient polishing tool of metal and non-metallic materials in small area of rust deburring and surface polishing, high efficiency, low cost.,used with most rotary tools.
  • 【Widely Applications】Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a tool, fit for rotay tools grinder etc.Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.
Check Stock

100 Pack Abrasive Wheels, Rocaris 1\ (25mm) Abrasive Buffing Polishing Wheels Burr for Rotary Tools-1/8\(3mm) Shank

  • 【Abrasive Buffing Wheel Set】25 mm abrasive wheel with 3 mm silver shank and 5 different grits, Brown 120Grit, Green 180Grit, Red 320Grit, Black 400Grit, Gray 600Grit, each grit 20 pieces, total 100 pieces..
  • 【Size】Shanks are 1/8 inch (3mm), buffing wheels are 1" in diameter, 25 mm abrasive wheel.
  • 【Repair The Dents】Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for all types of detail work in both hard and delicate materials..
  • 【Convenient And Practical】 Small buffing wheel is an efficient polishing tool of metal and non-metallic materials in small area of rust deburring and surface polishing, high efficiency, low cost.,used with most rotary tools.
  • 【Widely Applications】Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a tool, fit for rotay tools grinder etc.Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.
Check Stock

JIUNENG 1 inch Abrasive Wheel Buffing Polishing Wheel Set with 1/8inch Shank for Rotary Tool 80 Grit (25mm) 40Pcs

  • 【Size】Shanks are 1/8 inch (3mm), buffing wheels are 1"or1-1/2'' in diameter, 25 mm or 38 mm abrasive wheel.
  • 【Abrasive Buffing Wheel Set】25 mm/38mm abrasive wheel with 3 mm silver shank and 4 different grits, Brown 80Grit, Green 150Grit, Red 240Grit, Black 300Grit..
  • 【Repair The Dents】Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for all types of detail work in both hard and delicate materials..
  • 【Convenient And Practical】 Small buffing wheel is an efficient polishing tool of metal and non-metallic materials in small area of rust deburring and surface polishing, high efficiency, low cost.,used with most rotary tools.
  • 【Widely Applications】Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a tool, fit for rotay tools grinder etc.Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.
Check Stock

Mixiflor 40Pcs Cone Shape Abrasive Sandpaper 1/4 Inch Shank Flap Wheels 80/120/180/240/320 Grits Aluminum Oxide for Removing Rust Deburring Polishin

  • MOST COMMON SHANK SIZE: The 1/4 shank makes these abrasive wheels suitable to be used as sanding wheels for electric drills, cordless drills, die....
  • METALWORKING APPLICATIONS: The mounted flap sanding wheels are commonly used in metalworking as a grinding or deburring wheel to clean up welds and....
  • WOODWORKING APPLICATIONS: Often used for flap sander wheels in woodworking for the stripping of old layers of paint when during resurfacing projects....
  • PREMIUM MATERIALS: High quality aluminum oxide coated abrasive cloth provides a solid and durable grinding power combined with high efficiency and....
  • YOU WILL GET: 6*15mm Cone Shape Abrasive Sandpapert - 5 Different Sanding sizes ‒ 8 pcs of each 80/120/180 /240/ 320 grits.
Check Stock

Weiler 30717 3/4\ x 3/4\ x 80AO Wolverine Coated Abrasive Flap Wheel, 1/4\ Stem (Pack of 10)

  • COMMON SHANK SIZE: The 1/8 shank makes these abrasive wheels suitable to be used as sanding wheels for electric drills, cordless drills, die grinders. For best results and longer service life, rotating speed should be maintained below 20,000 RPM..
  • PREMIUM MATERIALS: High quality aluminum oxide coated abrasive cloth provides a solid and durable grinding power combined with high efficiency and long life to give you that premium performance that you need and expect from your tools..
  • METAL WORKING APPLICATIONS: The mounted flap sanding wheels are commonly used in metalworking as a grinding or deburring wheel to clean up welds and cuts in iron, stainless steel and metal alloys. Also used for removing layers of rust and paint on flat metal surfaces.
  • WOODWORKING APPLICATIONS: Often used for flap sander wheels in woodworking for the stripping of old layers of paint when during resurfacing projects or sanding and finishing contoured wood surfaces. .
  • VARIETY OF WHEEL SIZES: Our 90 Pack Wheel Sander includes 30 pack 1.26" flap wheels, 30 pack 0.79" flap wheels and 30 pack cone shape abrasive sandpaper.
Check Stock

Grinding Wheel Dresser Replacement Blades -Power Grinder Accessories- Pack of 6 cutters

  • Improves Performance- Replacing your wheel dresser blades increases efficiency of your dressing tool and along with your grinding wheel.
  • Perfect Fit- With discs have a 1/4" arbor and a 1 1/8" outer diameter, these replacement blades are designed for Truepower's Grinding Wheel Dresser, but may fit with other grinding wheels.
  • Quality Pack of 6- One purchase gives you 6 new wheels to enhance your grinding tool.
  • Saves Time- Frequent replacement makes the grinding process quicker and safer.
  • Durable and Quality Discs- These replacement wheels leave you with a smooth and abrasive grinding wheel.
Check Stock

Rocaris 72 Pack Wire Wheel Brushes Set, Brass and Steel Wire Brush Set 1/8\ Shank for Rotary Tools Accessories Polish Clean Tools

  • ☑️Value Abrasive buffing wheels Pack - 60 pieces abrasive wheel with 1/8" shank and 6 grits, 10 pieces for each grit.
  • Brown 120Grit, Green 180Grit, Red 240Grit, Black 400Grit, Thin white wool felt buff wheel 1000Grit, Thick white cotton buff wheel 3000Grit..
  • ☑️Widely Usage - Used for DIY engraving, buffing, polishing. Ideal for removing rust/corrosion from any metal surfaces, easily achieve a smooth, uniform finish and conformability to irregular surfaces. Widely used in derusting, grinding, sanding, deburring, and stripping residue..
  • ☑️Broad Applicability - Fit for detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel, molds, medical equipment, jewelry, plastics, stone, rivets..
  • ☑️Warm Tips For Usage - It is recommended to use the lowest gear. Excessive speed can easily cause the brush apart and affect the service life..
  • ☑️Universal Compatibility - Buffing wheels diameter:1 inch(25mm). shanks are 1/8 inch (3mm). Polishing wheels mounted 3mm mandrel fits most rotary tools, polishers, hand drill, etc..
Check Stock

Rocaris 1\ Brown 120 Grit Abrasive Buffing Polishing Wheels Burr For Rotary Tools-1/8\(3mm) Shank 50 Pack

  • 【Size】Shanks are 1/8 inch (3mm), buffing wheels are 1" in diameter, 25 mm abrasive wheel ,120Grit.
  • 【Abrasivr Buffing Wheel Set】25 mm abrasive wheel with 3 mm silver shank and 120 grits,total 50pieces. Suitable for most ferrous and non-ferrous metals, castings, welded joints, rivets, rust, stone, glass.
  • 【Repair The Dents】Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for all types of detail work in both hard and delicate materials..
  • 【Convenient And Practical】 Small buffing wheel is an efficient polishing tool of metal and non-metallic materials in small area of rust deburring and surface polishing, high efficiency, low cost.,used with most rotary tools.
  • 【Widely Applications】Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a tool, fit for rotay tools grinder etc.Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.
Check Stock

Sackorange 30 PCS Abrasive Flap Wheel Sander,80 Grit 1/8\ Shank Diameter Cone Shape Abrasive Sandpaper Flap Sanding Wheel Grinding Head Rotary Tool for Grinding and Polishing

  • MULTI-SIZE DESIGN: the abrasive flap wheel sander set contains 14 sizes of flap wheel with 1/4 inch shank,16 pieces 80 grits aluminum oxide sanding wheels and 8 pieces cone shape flap wheel, sufficient quantity to meet your various needs and replacemen..
  • PREMIUM MATERIALS: High quality aluminum oxide coated abrasive cloth provides a solid and durable grinding power combined with high efficiency and long life to give you that premium performance that you need and expect from your tools..
  • MOST COMMON SHANK SIZE: The 1/4 shank makes these abrasive wheels suitable to be used as sanding wheels for electric drills, cordless drills, die grinders ..
  • WIDE APPLICATIONS: The abrasive flap wheel sander set are applied for rust removal,cleaning, deburring,surface grinding and so on,helping you to complete your work quickly..
  • PACKAGE INCLUDES:valued flap wheel set, The sanding wheel set contains 8 sizes of flap wheel : 3.2 inch, 2.4 inch, 2inch, 1.6 inch, 1.2 inch, 1 inch, 0.8 inch, 0.64 inch.
  • 4 sizes of Cone Shape Abrasive Flap Wheel: 1.2 inch, 1inch, 0.8 inch, 0.64 inch, each contain 2 pieces..
Check Stock

100 Pieces Abrasive Buffing Wheels 1 Inch (25 mm) Buffing Polishing Wheel Set Rotary Tool Accessories Polishing Buffing Wheel with 1/8 Inch (3 mm) Shank for Rotary Tool, 5 Grits

  • What you will get:you will received 100 Pieces 25 mm abrasive wheel with 3 mm silver shank in 5 different grits, yellow is 120#, green is 180#, red is 320#, black is 400#,Gray is 800#..
  • Suitable Size : abrasive wheel diameter 1 inch(25mm), shank diameter 1/8 inch (3mm), total length 1.8 inch (46mm),Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for many types of detail work in both hard and delicate materials..
  • Quality Material :The buffing wheel kit is made of quality scouring pad, which has good wear resistance and polishing capabilities. Simple to use, provides a uniform finish, smooth and compliance for irregular surfaces. Ideal for refinishing furniture, cleaning grills, repair the dents, as well as removing paint and tarnish..
  • Features: Abrasive Buffing Wheels is mainly applied for burr removal, rust removal, dust removal, oxidation layer removal, coating, can improve the quality of metal stone and other materials, is an important part of mechanical processing technology.It is necessary and efficient..
  • Wide Application : Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, ....
Check Stock

Norton Abrasives Dressing Tool Stick, Grinding Wheel Tool for maximizing Grinding Wheel Performance

  • Take care of your grinding wheel with this Grinding Wheel Dressing Tool from Norton Abrasives, perfect for cleaning, opening and reshaping grinding wheels.
  • Crafted with a sharp, durable, medium grit silicon carbide abrasive, this dressing tool will deliver efficient truing and dressing of a variety of materials, including masonry, stone, brass, titanium and stainless steels.
  • This versatile dressing tool delivers excellent results when dressing conventional vitrified wheels and during rough finishing-stick work such as removing small burrs.
  • Designed for use with manual sharpeners, this grinding wheel dressing tool has a superior vitrified bond for extended longevity, and it is an ideal choice for opening, reshaping and cleaning grinding wheels to improve performance.
  • Dimensions: 1 x 1 x 6 In, made of Silicon Carbide.
Check Stock

FPPO 50PCS Abrasive Buffing Polishing Wheel Set for Rotary Tools,Removal of Rust Deburring on Metal Surface with 3mm Shank,Mini scouring pad Brush Polishing kit(grit 320 red 50pcs)

  • These polisher abrasive buffing wheel are used for Dremel DIY engraving, grinding, polishing.Ideal for Removing Rust/Corrosions from Any Metal Surfaces,fit for detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel..
  • Buffing wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces.Widely used in derusting, grinding, sanding, deburring and stripping residue..
  • Small buffing wheel is an efficient polishing tool of metal, with small, high efficiency, low cost,good wear resistance, durable and practical..
  • Note- The speed of the tool should not be too fast. It is recommended to use the lowest gear. Excessive speed can easily cause the brush apart and affect the service life..
  • Buffing wheels diameter:1 inch(25mm).Shanks are 3mm（approximately 1/8" ).Polishing Wheels mounted 3mm Mandrel fits most Rotary Tools, Polishers, Hand Drill etc..
Check Stock