Categories

Best Ceramic Abrasive Strip Discs

Scotch-Brite Radial Bristle Brush, 6 in x 1/2 in x 1 in 80 With Adapter

  • Molded, abrasive-filled bristles strip, deburr, blend, finish, polish, clean, and remove coatings more effectively, with less pressure than wire brushes.
  • Proprietary 3M Ceramic Abrasive Grain provides aggressive cutting and consistent finish quality throughout the life of the disc.
  • Flexible bristles require less pressure than wire brushes and conform to contours, even on complex parts.
  • Bristle spacing is ideal for coating removal and other high-loading substances.
  • Contains no wire filaments for improved safety.
Check Stock

Work Sharp Guided Field Sharpener

  • Sharepn Chisels, lathe tools, plane irons, spoke shavesm and carvinge tools to razor sharp edges. The WS3000 uses a true flat glass wheel for incredibly sharp tools and perfectly flat backs. Includes (2) glass wheels, (1) slotted Edge-Vision wheel, (2) P120 abrasive discs, (4) P400 abrasive discs, (4) P1000 abrasive discs, (1) 3600 abrasive disc, (1) P80 slotted abrasive discs, (2) P400 slotted abrasive discs, (2) P1200 slotted abrasive discs, (1) tool rest, (1) crepe stick..
  • No jigs required - sharpening port has precise and repeatable bevel angle settings of 20°, 25°, 30° and 35° for chisels and plane irons up to 2" Wide. Achieve a perfect 5° micro-bevel for fast re-honing..
  • Powerful 1/5 HP motor - with 580 rpm speed has routed air flow and a heat sink cooling system to sharpen blades fast without blade damaging heat. This low-rpm wheel maintains speed regardless of load for improved consistency, so whether your specialty is custom furniture, cabinetry, or old-fashioned wooden toys.
  • Accessories available - you can attach a wide variety of standard six-inch, adhesive-backed abrasive disks to these wheels, making it easy to select the grit you need for rough grinding or fine honing. And with two glass wheels, you can always have four different....
Check Stock

3M 3M-18734 Roloc Bristle Disc Grade - 50, Size - 3 - Green

  • ▲[Package includes] Our rotary tools accessories - jewelry tools polishing brushes have 6 different grit with 6 various colour and every grit has 10 pieces for different needs. Green-80 grit, Blue-120 grit, Red-220 grit, Gray Blue-400 grit, Purple-600 grit, Light Green-1000 grit.There are six mandrel(3Pcs 1/8"mandrel+3Pcs 3/32" mandrel).
  • ▲[Feature] Rotary brush is a new type of abrasive that is superior to sandpaper, flap wheels, or other types of sanders, brushes, or abrasive wheels. Molded, abrasive-filled bristles strip, deburr, blend, finish, polish, clean, and remove coatings more effectively, with less pressure than wire brushes..
  • ▲[Application] The detail polishing discs mainly suit for deburring, cleaning, finishing, machining and polishing detailed parts, tiny areas and irregular places, like Fruit pit carving,woodcarving.
  • ▲[Multifunction] The radial bristle brush fits also for metal polishing, paint prep, coating & corrosion removal.
  • ▲[Compatibility] The fine polishing wheel brush can be used with most multi-function tools, such as for Dremel drill, die grinders and rotary tools, Recommended for between 15,000-30,000rpm..
Check Stock

WEN 6524 Oscillating Belt and Spindle Sander & POWERTEC 71002 Abrasive Cleaning Stick for Sanding Belts & Discs | Natural Rubber Eraser - Woodworking Shop Tools for Sanding Perfection

  • ...y tools for the utmost sanding control..
  • HIGH QUALITY MATERIAL- Katzco flap discs are made of high quality aluminum oxide. Professional Quality grinding discs will level, strip, rebuff, and prep our surfaces. Removes paint off of surfaces as well..
  • OUR SPECIALTY- the Katzco lineup includes an extensive selection abrasive flap discs and sanding flap wheels for sale. You can find a flap wheel in a wide range of sizes and in grits from 24 to 120G. Like all of our products, these flap wheels and discs can provide the innovative solution you need for your specific sanding and finishing applications..
  • CHECK US OUT- When it comes to purchasing flap discs, you have plenty of options. However, a reputable company that cares about you and your project will help you experience a better result. Katzco has a large variety of tools, accessories and supplies to meet your immediate needs and your needs in the future..
Check Stock

WORKPRO 101-pieces Sanding Discs Set, 2 inch Discs with 1/4 inch Holder, Surface Conditioning Disc for Die Grinder Surface Prep Strip Grind Polish Burr Finish Rust Paint Removal

  • ...ack sanding discs and one wool disc. The product quantity and grits are indicated on separated packing bag..
  • 【High Performance】These sanding discs combine premium quality sanding grains(aluminium oxide/zirconium oxide/non-woven aluminium oxide/SiC/wool) with strong, high toughness shank base, long last with high abrasive resistance. They can operate up to 23000 RPM..
  • 【Wide Applications】Various surface conditioning discs are excellent for using on surfaces of carbon steel, stainless steel, alloys, iron, non-ferrous and other nonmetal materials like wood, glass, ceramics, stone. Wide used in shipbuilding, car building, aviation, machinery..
  • 【Easy to Install】These disc has unique safety torque screw, the connection between sanding disc and rubber holder get firmly when rotating, ensures steady working and no fall out. Just twist it to remove or connect, convenient and efficient..
  • 【High compatibility】There are two 2-inch rubber backing pad in set, can be attached to any 1/4 inch power drill, air grinding tool, or die grinder. Great for most surface prep works like strip, burr removal, grind, polish, inverted circle and mirror and so on..
Check Stock

60Pcs Cutting Wheel Set for Rotary Tool - JUEMEL 545 Diamond Cutting Wheel, HSS Circular Saw Blades, Resin Cutting Disc with Mandrels for Wood Glass Plastic Stone Metal

  • 【3 Types Mixed Cutting Wheel Set】: Goxawee cutting disc set provide 3 types cutting wheels, including diamond cutting discs, HSS cutting saw blades, and resin cutting wheels. It is an ideal for rotary tool’s beginners to learn how to use different wheels in DIY projects..
  • 【Multi-purpose Cutting Discs】: The resin cut-off wheels set is suitable for all kinds of metal, soft alloy, aluminum, diamond cutting wheel set for stone, ceramic, glass, jade stone, HSS cutting disc for wood, plastic, PVC pipes. Can cover the different purpose for DIYers..
  • 【High Quality Discs】:This disc set is made by premium material, it has high working efficiency, and perfect cutting effect, also can meet requirements of DIY enthusiasts..
  • 【Great Disc Set for DIY】: The 1/8" (3mm / 3.3mm) shank cutting disc mandrels fit for most power die grinders or rotary tools & air tools, it is easy to use and can change the accessories fast..
  • 【Package Details】: 53Pcs Rotary tool mini cutting discs sets include 6 × HSS wood cutting saw blade discs, 10 × Diamond cutting discs wheels, 20 × Resin Cutting Wheel Cut-off Discs, 6 x Abrasive Stone, 3 x Rotary Burr & 7 × Mandrels..
Check Stock

Gyros 2” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-42002

  • ...at generation and thin cutting line. They are manufactured in the USA and can work at a maximum speed of 30,000 RPM..
  • Double Reinforced, High Quality – Our cutting discs have high efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk ST Multi-Set is a must-have for Professionals and Hobbyists looking for the finest rotary tool accessories for Dremel and other top brand rotary tools..
  • Super Tensile Strength – Gyros ST mini cutting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensile Strength, such as steel alloys, hard bronze, and metals..
  • Works with Variety of Tools – These cutting discs are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and so on, making them the perfect rotary cutter. For best....
Check Stock

GYROS 1.5” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-41502

  • ...at generation and thin cutting line. They are manufactured in the USA and can work at a maximum speed of 45,000 RPM..
  • Double Reinforced, High Quality – Our cutting discs have high efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk ST Multi-Set is a must-have for Professionals and Hobbyists looking for the finest rotary tool accessories for Dremel and other top brand rotary tools..
  • Super Tensile Strength – Gyros ST mini cutting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensile Strength, such as steel alloys, hard bronze, and metals..
  • Works with Variety of Tools – These cutting discs are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and so on, making them the perfect rotary cutter. For best....
Check Stock

GYROS 1.75” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-41702

  • ...at generation and thin cutting line. They are manufactured in the USA and can work at a maximum speed of 42,000 RPM..
  • Double Reinforced, High Quality – Our cutting discs have high efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk ST Multi-Set is a must-have for Professionals and Hobbyists looking for the finest rotary tool accessories for Dremel and other top brand rotary tools..
  • Super Tensile Strength – Gyros ST mini cutting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensile Strength, such as steel alloys, hard bronze, and metals..
  • Works with Variety of Tools – These cutting discs are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and so on, making them the perfect rotary cutter. For best....
Check Stock

XSORB Chemical Neutralizer, Acids, 13 gal.

  • Resin bonded aluminum oxide abrasive is coated on a durable Xwt backing to provide maximum life.
  • Free cutting and clog resistant open coating makes cloth discs ideal for heavy stock removal.
  • Hook and Loop discs can be used on portable random orbital sanders.
  • Norton cloth sanding discs are made with aluminum oxide abrasive for long life.
Check Stock

GYROS 1.5” Resin Cut-Off Wheels for Rotary Tools. 12 Double Fiberglass Reinforced Cutting Discs | High-Tensile for Materials like Steel, Bronze. Dremel Cutting Tool Accessory | Made in USA 11-32156/12

  • ...neration and thin cutting line. They are made in the United States and have a maximum speed of 45,000 RPM..
  • Double Reinforced, High Quality – Our cutting discs have a high working efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk HT Multi-Set is a must-have for professionals and hobbyists looking for the best Dremel and other top-brand rotary tool accessories..
  • High Tensile Strenght – Gyros HT mini cutting discs are designed to cut all hardened and softened steels, steel alloys, hard bronze, and metals. Because the abrasive is perfectly matched to the materials being cut, the cutting action is superior. LT stands for Low-Tensil Strength, which includes materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. ST for Super-Tensile Strenght materials such as stainless and titanium..
  • Works with Variety of Tools – These cutting disks are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and so on, making them the ideal rotary cutter. Use with Gyros Stainless Steel Mandrel SKU 40-00470 is compatible. For your saf....
Check Stock

GYROS 2” Mini Resin Cut-Off Wheels for Rotary Tools. 12 Double Fiberglass Reinforced Cutting Discs | High-Tensile for Materials like Steel, Bronze. Dremel Cutting Tool Accessory. Made in USA 11-32208/12

  • ...neration and thin cutting line. They are made in the United States and have a maximum speed of 30,000 RPM..
  • Double Reinforced, High Quality – Our cutting discs have a high working efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk HT Multi-Set is a must-have for professionals and hobbyists looking for the best Dremel and other top-brand rotary tool accessories..
  • High Tensile Strenght – Gyros HT mini cutting discs are designed to cut all hardened and softened steels, steel alloys, hard bronze, and metals. Because the abrasive is perfectly matched to the materials being cut, the cutting action is superior. LT stands for Low-Tensil Strength, which includes materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. ST for Super-Tensile Strenght materials such as stainless and titanium..
  • Works with Variety of Tools – These cutting disks are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and so on, making them the ideal rotary cutter. Use with Gyros Stainless Steel Mandrel SKU 40-00470 is compatible. For your saf....
Check Stock

GYROS 1.75” Mini Resin Cut-Off Wheels for Rotary Tools | 2 Double Fiberglass Reinforced Discs | For Wood, Plastic, Stone, Aluminum, Copper, Brass | Dremel Cutting Tool Accessory | Made in USA 11-21702

  • ...th low tensile strength. These Fiber Disk cutting discs are perfect for both professional and DIY production due to their low heat generation and thin cutting line. They are made in the United States and have a maximum speed of ​​42,000 RPM..
  • Double Reinforced, High Quality - Cutting discs are made of fiberglass abrasive with a double reinforced structure, they have a great working efficiency, unrivaled strength, and flexibility, are long-lasting and break-resistant. Professionals and hobbyists looking for the best rotary tool accessories for Dremel and other top-brand rotary tools will appreciate the Gyros Fiber Disk LT Multi-Set..
  • Low Tensile Strenght – Gyros LT mini cutting discs are designed to cut a variety of materials, including Wood, Plastic, Stone, Ceramic, Aluminum, Copper, and Brass. Because the abrasive used is perfectly matched to the materials being cut, the cutting action is superior. Other formulations are HT – stands for High-Tensile Strength materials such as steel alloys, hard bronze, and metals. ST – stands for Super-Tensile Strength materials such as stainless steel and titanium..
  • Works with Variety of Tools – These cutting disks are compatible with a wide range of Rotary Cutting Tools, including Dremel tools, electric d....
Check Stock