Categories

Best Ceramic Carving Burrs

aTourer Tungsten Carbide Burr Set Rotary File Rasp 1/8 & 1/4 Cutting Head Die Grinder Milling Bit 20pcs Single Burr Double Cut 20pcs

  • ...all non-metal materials. Single cut burr provides large, wide flutes evacuate the large chips easily and also prevent iron-chip accumulate and over-heat cause cutter head damage. It is more suitable for relatively high density materials such as iron, alloy steel, stainless steel etc..
  • 【Professsion 20 PCS Set】The carving bits include A, C, D, E, F, G, H, L, M and N type burrs. There are 2 sizes for each type burrs, which is 1/8 shank 1/8 head diameter and 1/8 shank 1/4 head diameter. They are suitable for almost everything you need for engraving, cutting, shaping, grinding, polishing and removing sharp edges..
  • 【Easy to Use】 If the cutting bits are chipping easily this could be due to the speed being too slow. However, it's ideal to start the cutting slow, increasing the speed as you go along. High speeds will prevent clogging in the flutes of your burrs. The 1/8 carving burrs can bear the speed range of 6000-50000 revolutions per minute..
  • 【Widly Use】The 3mm and 6mm head diameter carbide cutting burrs set is widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, cylinder head porting and sculpting..
Check Stock

Diamond Grinding Burr Bit Set，20Pcs Rotary Tool Accessories Stone Carving Set with 1/8 inch Shank for Stone Ceramic Glass Carving, Grinding, Polishing, Engraving, Sanding

  • 【Material】：#60 Grit Diamond -coated Grinding set, high hardness, uniform sand，rougher surface which are quicker than the larger grit burrs when sanding, carving and grinding, wear resistance..
  • 【Widely Use】: Diamond burr set used for precision sanding, grinding, sculpturing, dressing in rock, ceramic, glass, precious stone, agate stones and more, shaping the deadwood areas of bonsai trees, and carving hard agate stones etc..
  • 【3mm(1/8") shank】: Diamond grinding burr drill bits set fits for most drills, rotary tools or die grinders. High compatibility, easy change..
  • 【Great Gift for DIY Enthusiasts】: 10 Different Shapes diamond grinding burr bits, includes sphere, cone, cylinder, round head cylinder, bullet, etc, Rich in quantity and various shapes meet your many grinding and carving needs..
  • 【Quality Gurantee】: You will get 20 pcs diamond grinding bits packaged in a durable clear case. If any issues with quality, leave us a message and we will provide a 100% satisfactory solution soon or full refund..
Check Stock

Diamond Burr Bits ZFE Diamond Burr Bits Drill Kit for Rotary Tool Metal Woodworking Router Grinding Engraving Carving- 1/8 3mm Shank Pack of 90Pcs/ 3 Sets

  • ▲90pcs Diamond Burrs - Excellent for fine detail work, cutting, engraving, carving, touch-up and finishing.
  • Work on glass, metal , stone, ceramic, wood, plastic.
  • ▲Sold Storage Box - PC plastic box is sturdy, falling resistant and moistureproof, easy for carrying and hanging.
  • All parts were in order and set was complete, well organized to prevent scattered and confused.
  • ▲Different Sharp Bits Accessories - 30 Style different sharp router bit can reach More Carving, Great for all types of detail work..
  • ▲Wide Usage - 1/8" diameter shanks, compatible with most rotary tools.
  • Ideal for home improvement, craft and whenever you need to polish, grind, drill, cut, engrave, and more,used with most rotary tools ,Able to engrave on a wide range of materials including: wood, ABS, acrylic, PVC, plastics, etc. Well-suited for detailed work, such as building and sanding dollhouse furniture, model trains, or miniature buildings,Highly recommended for jewer.
  • ▲What You Will Get - ZFE 90-Piece rotary tool carving,engraving bits kit and our best service.
Check Stock

Bestgle 5pcs 1/4 inch Hex Shank Rotary Burr Set, HSS Wood Carving Rotary Rasp File Electric Grinding Tool

  • Shank Size: 1/4''(6.35mm) Hex Shank, Head Dia. : 12-13mm, Head Length: 27-28mm.
  • Made of high quality high speed steel(4241) for long life and exceptionally precise cuts the first time, saving you energy and stress..
  • 1/4 inch hex shank would fit many electric powered or pneumatic powered tools and machine tools..
  • 5 piece burrs in various shapes that you can use for many purposes, ideal for Soft Metal/ Plastic/ Woodworking, Grinding, Carving, Polishing.
  • This set of rotary burrs could be used on soft metal like aluminum, copper. Widely used for carving, shaping and for the removal of sharp edges or corners, burrs and excess material..
Check Stock

5PCS Basswood Carving Blocks - Small Unfinished Balsa Wood Blocks for Carving, Beginner or Expert Basswood Carving or Whittling kit

  • NATURAL WOOD: Wood carving wood is made of natural Basswood, polished and remove burrs. Maintain a smooth surface and texture..
  • DIY CRAFTS: The soft texture of unfinished wood blocks easy to create various craft projects.The smooth surface can paint, color, etc..
  • IDEAL CHOICE: Basswood is the ideal choice of wood carving materials for beginners to expert carving use..
  • GREAT GIFT: Wood carving kit or wood carving crafts are suitable as gifts for lovers who like carving. To share the joy of carving wood crafts..
  • PACKAGING INFORMATION: The 5 pieces wood carving tools in the package include: one 4*2*2 inches and four 4*1*1 inch wood whittling kit..
Check Stock

Hario Ceramic Canister Coffee Grinder, Wood

  • Manual coffee grinder using burrs made of ceramic.
  • Burrs make for a more consistent grind that’s easily adjustable and set for repeat use.
  • Ceramic burrs don't transfer heat and shave the coffee beans vs cracking the beans like blade grinders.
Check Stock

Stone Carving Set Diamond Burr Bits 20PCS Polishing Kits Rotary Tools Accessories with 1/8’ Shank For Carving Engraving Grinding Polishing Stone Rocks Jewelry Glass Ceramics

  • 1. Precision work - Durable excellent for fine detail work, polishing, sanding, grinding, cutting, engraving, carving, touch-up and finishing.
  • Works on glass, metal , stone, ceramic, jade, jewelry, wood, plastic and other hard material..
  • 2.Different Shapes - Polishing kits set have 6 different heads used for various applications meet different needs. Highly recommended for carving and cutting glass, stones and ceremic, DIY engraving hobbies, craft modeling, home repair (wood, plastic and dog’s nails) etc..
  • 3.Universal Shank - All diamond grinding burrs with 1/8" shank compatible with most rotary tools and  die grinders..
  • 4.Durable Storage Box - 20pcs Grinding heads packaged in a sturdy plastic box, falling resistant and moistureproof, easy to carry and stock, well organized to prevent scattered and confused.(Power tool not included).
  • 5.100% Quality Guarantee - Buy with confidence, please feel free to leave us a message, if there is any problem or issue you would like us to address. we will be happy to provide you with a full refund or replacement and sincere apologies. Many thanks for your support!.
Check Stock

Carbide Burr Set Die Grinder Bits Rotary Tool Bits 1/8" Shank 20 PC Double Cut Compatible with Dremel Wood Carving Accessories Cutting Burrs Metal Grinding Engraving Polishing Porting Trimming

  • ... head diameter. Total length: 45-50 mm( 1.77-2 inch)..
  • √【High efficiency and Practical】All burrs with 1/8" shank-compatible with Dremel or most rotary tools, accurate centering. The processing efficiency is higher than the manual file tool. 20 different types of carving kit drill bits, meet your different needs..
  • √【Double Cut Design】 The double cut burr head groove lines of the head are crossed, more suitable for an object whose density is relatively low, such as wooden product, plastic and some Soft Metal..
  • √【Hardness HRC70, Carbide Die Grinder Bits】Carbide burr set, packed with nice plastic case for safety storage and protection. High efficiency, high-quality finish, long service life, good economic returns.The working life of these solid rotary burr is 10 times longer than high-speed steel and 200 times longer than grinding wheel..
  • √【A good Carbide Burr Set】A good choice of DIY wood carving, engraving, and polishing. Suitable for multiple types of rotating tools.Making DIY carving fans much easier to do the wood working job.Excellent for fine detail ....
Check Stock

Benchmark Abrasives 6” Flame Shape Tungsten Carbide Double Cut Rotary Burr 1/4 Shaft for Metalwork Woodworking Deburring Shaping Carving on Fiberglass Plastic Copper SH-5

  • Benchmark Abrasives carbide burrs with 1/4" shaft is ideal for woodworking, drilling, metal carving, engraving, medium stock removal, deburring, finishing, and cleaning, etc..
  • These carbide burrs are made of tungsten carbide. Double-cut burrs will leave a slightly smoother finish than single-cut due to producing smaller chips as they cut away the material..
  • The double-cut carbide rotary burrs are suitable to use with die grinders and hand-held pneumatic grinders. A double-cut carbide burr is the most popular cut and will see you through most applications..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Benchmark Abrasives 6” Oval/Egg Shape Premium Tungsten Carbide Double Cut Rotary Burr 1/4 Shaft for Metalwork Woodworking Deburring Shaping Carving on Fiberglass Plastic Copper SE-5

  • Benchmark Abrasives carbide burrs with 1/4" shaft are ideal for woodworking, drilling, metal carving, engraving, medium stock removal, deburring, finishing, cleaning, etc..
  • These carbide burrs are made of tungsten carbide. Double-cut burrs will leave a slightly smoother finish than single cut due to producing smaller chips as they cut away the material..
  • The double-cut carbide rotary burrs are suitable to use with die grinders and hand-held pneumatic grinders. A double-cut carbide burr is the most popular cut and will see you through most applications..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

JINGLING 2.35mm Diamond Grinding Head Tapered Bits Carving Burrs Pack of 30Pcs

  • Product Name: Diamond Carving Burrs, Conical Grinding Bit, Cone Grinding Bit.
  • Diamond grinding head is ideal tools for grinding mold, hard alloy, glass apparatus, jade carvings.
  • Suitable for electric grinder, carving machine, machinery supporting assembly with a 3/32" collet.
Check Stock

15 Pieces Wood Carving and Engraving Drill Bit Double Cut Carbide Rotary Burr Woodworking Drill Bits Set for DIY Woodworking Drilling Engraving Polishing Supplies

  • You will receive: the package contains 5 pieces wood carving and engraving drill bits and 10 pieces double cut carbide rotary burr, 15 pieces in....
  • Size details: wood carving tools have 5 sizes carving, 3 x 3 mm, 3 x 4 mm, 3 x 5 mm, 3 x 6 mm, 3 x 7 mm, 3 x 8 mm in shank and bit diameter.
  • Durable to use: the wood carving and engraving drill bits are made of high-speed steel, and the double cut carbide rotary burrs are made of tungsten....
  • Easy to use: the 1/8 inch handle fits most rotating tools, just install it like any other typical drill bit easily, will be your ideal choice for DIY....
  • Functional tools: our practical tool accessories provide you delicate fine processing, widely applied in metal, woodworking, model engineering,....
Check Stock

K Kwokker Tungsten Carbide Burr Set 1/8 Shank Diamond Files HRA85 Rotary Tool Accessory Kit, Drill Chucks Accessories for Dremel Rotary Drill Air Die Grinder for Metal Polishing, Wood Carving

  • √ [Safe And Efficient, Like a Hot Knife Thru Butter] VERY IMPORTANT: SINGLE-SLOT Tungsten carbide burrs drill bits, BEST FOR: Metal, cast iron, cast steel, carbon steel, alloy steel, stainless steel and so on.
  • GOOD FOR: wood, marble, jade, ceramic, glass etc. NOT FOR: EPOXY. PLEASE USE ROTARY BURR SET ON THE CORRECT MATERIAL TO AVOID DAMAGE TO THE PRODUCT DUE TO INCORRECT USE..
  • √ [This Is a Essential Rotary Burr Set] Grinding head for air die grinder. NOTE: When using the wood carving bits, make sure that the burr handle is fully inserted into the chuck and tightly clamped. Eye masks and gloves are recommended to prevent stab wounds..
  • √ [Warmth Tips] The speed of the rotary tools usually is 6000-50000 revolutions per minute, long service life, reduce the inefficiency turnover. Machining drill bits, easy to cutting, durability. Really nice carbide drill bits..
Check Stock