Categories

Best Ceramic Cbn Grinding Wheel

BUCKTOOL CBN Grinding Wheel, Sharpening Wheel, High Speed Steel Tools, 180Grit, 8Inch, 1' Wide, 5/8' Arbor, Ideal for Sharpening Wood-Turning Tools, Chisels, Hardcore and More, Cubic Boron Nitride

  • Advanced Material: The hardness of the CBN grinding wheel is much higher than that of ordinary abrasive, meaning that its cutting ability is stronger and sharper. Compared with diamond grinding wheels, it has more advantages in processing ferrous metals.
  • Broad Application: This Sharpening wheel is suitable for grinding and polishing products of various materials, such as woodturning tools, high manganese steel, alloy steel, chilled cast iron, high hardness, and soft and tough materials, which allows you to satisfy most of your daily needs.
  • Universal Match: Designed for use with 8-inch bench-type grinders 3600RPM (Maximum), work great on Bucktool bench grinder TDS-200DS and TDS-200C4HL, can also be matched with other brands 8” bench grinder and you have not to worry about its use restrictions.
  • User Experience: While sharpening high-speed steels, the grinding wheel not only has higher wear resistance and easier to maintain shape compared with ordinary abrasives but also its excellent thermal conductivity achieves cool cutting, generating much less heat.
  • No Maintenance: Due to the high wear resistance of the Cubic Boron Nitride coated wheel, the shape of the grinding wheel does not change much during use meanwhile it can be used for a long time and you do....
Check Stock

Lincoln Electric KH236 Bench Grinding Wheel, Aluminum Oxide, 4000 rpm, 6\ Diameter, 1-1/4\ Arbor, 60 Grit (Pack of 3)

  • Precision Made Solid Aluminum body 8" dia by 1/4" with CBN on the face and 1/4" sides of the wheel. For 5/8 inch shaft..
  • Designed for use with slow speed 8 inch bench type grinders.
  • Will never need dressing, or truing. Wheel Diameter stays the same, so you will not need to be keep adjusting your jig. Now includes two precision ground, parallel surface washers..
  • Use with High Speed Steel (HSS)Tools Only.
  • Note: These wheels are made with very tight tolerance's. The arbor hole is precisely cut to .6254 inches. The shaft on many grinding motors are not as precise, and may be slightly larger then .625 inch. This will cause an interference fit. A little bit of emery cloth on the shaft will help get the wheel on..
Check Stock

MRCM Drill bit Sharpener for High-Speed Steel, Masonry, Carbide, Cobalt, & TiN-Coated Drill Bits,with Adjustable Angles from 90° to 135°,Sharpens 3mm-20mm Drill Bits… (MR-20G)

  • Capable of sharpening drill bit from 90°to 135°point angle of either a standard or split point..
  • Sharpens Standard Drill Bits – from 3mm" to 20mm" standard twist bits.Capable of setting the trimming angle to adjust the amount of material taken off on the center point of the drill bit,which will allow production of various drill bits to accommodate different material.
  • Grinding wheel is optional: CBN or SDC. The CBN model is used for High speed steel material.
  • while the SDC model is used to grind alloy tungsten steel material..
  • Capable of sharpening the front rake,front tip angle and clearance angle of drill bits.
Check Stock

Spyderco - White Silver - DoubleStuff Sharpening Stone - Fine Ceramic Stone and Cubic Boron Nitride - 303FCBN2

  • Knife Sharpeners - All Spyderco Knife Sharperners share the same key qualities.
  • they are quick and easy to use, do not require oil, water, or complicated clamps and fixtures, and do not need electricity..
  • CUBIC BORON NITRIDE - Cubic Boron Nitride is a superabrasive that is second in hardness to diamond. It offers greater abrasion resistance and thermal conductivity, making it the preferred abrasive in many advanced industrial grinding applications..
  • Specifications - Overall Length (Inches): 5, Materials: CBN & Fine Ceramic Stone.
Check Stock

Genuine New Holland Disc Mower Blade Set for H7320/H7220

  • Powerful 3/4 HP motor and industrial design ensure efficient and reliable performance. The grinder is ideal for a wide range of applications including mower blade and tool sharpening..
  • 9" aggressive 24 grit ceramic/steel wheel provides fast and effective sharpening and grinding of a variety of materials including metal and stone..
  • Ceramic grinding wheel eliminates grinding wheel dust compared to traditional grinding wheels..
  • Easy-to-learn and simple to use. Preset 30-degree guides quickly achieve professional results and factory edge on mower blades and other tools..
  • Grind any length cutting edge on both standard (right-hand) and reverse (left-hand) blades!.
Check Stock

YOZUMD Grinding Wheel 5Pcs 100mm Universal high-Strength Strip Discs Grinder Remove Rust Paint Clean Welds Grinding Wheel Purple

  • Nylon fiber metal polishing grinding wheel grinding wheel Black emery material is a kind of high-strength, high-wear-resistant honeycomb soft grinding material made of high-strength wear-resistant fiber mesh as the base material and organically combined resin elastomer and corundum through a special process Tool..
  • Nylon fiber metal polishing grinding wheel grinding wheel Derusting wheel is suitable for grinding interface grinding, oil pipe deburring, ceramic bottom polishing, surface paint removal, etc. The peeling disc is easy to clean and remove paint, rust and oxidation..
  • Grinding Wheel Material: Black Adamas Quantity: 5Pcs Diameter: 100mm/4.
Check Stock

Disc Wheel Blade Grinder - 3/4 HP Fast Mower Blade Grinder Sharpener | RBG 934

  • Powerful 3/4 HP motor and industrial design ensure efficient and reliable performance. The grinder is ideal for a wide range of applications including mower blade and tool sharpening..
  • 9" aggressive 24 grit ceramic/steel wheel provides fast and effective sharpening and grinding of a variety of materials including metal and stone..
  • Ceramic grinding wheel eliminates grinding wheel dust compared to traditional grinding wheels..
  • Easy-to-learn and simple to use. Preset 30-degree guides quickly achieve professional results and factory edge on mower blades and other tools..
  • Grind any length cutting edge on both standard (right-hand) and reverse (left-hand) blades!.
Check Stock

Gryphon Studio Stained Glass Grinder

  • ►Convenient and Portable:110V Power Stained Grinder Professional Industrial Mini Automatic Portable Stained Glass Grinder Water Ceramic Glass Machine DIY Desktop Grinding Tool.
  • ►Easy to operate：Before installation of grinding wheel, topped with lubricant, engine shaft grinding wheels need to apply a layer of lubricant inside.The grinding wheel mounted to the engine shaft, the fixed screw position higher than the engine shaft. The position of the grinding wheel on the axle must be at least 1/8" diamond part above the operating table.Fixed grinding wheel on the shaft with hexagonal wrench clockwisely..
  • ►Safety Use：Voltage: 110V, 0.1A,Power: 65W,Rotating speed: 4200r/min,Color: Red,Inside the rotary shaft (the fine shaft of the grinding head) diameter: 0.7cm, Grinding wheel inner diameter: 0.79cm.
  • ►Multifunction：Suitable for grinding glass,ceramics and other hard and brittle material.Mini size and easy to carry.Stable and reliable performance.Automatic water available for some sizes(5/8” 1”).New design switch avoid electronic conduction.Glass, ceramics, such as grinding hard brittle materials.Grinding va....
Check Stock

Radiac 34078809 8"x 1/2"x 1-1/4" RA46-G800-VOS Ruby Surface Grinding Wheel

  • Double Row Segmented Diamond Cup Wheel are designed for grinding concrete and fieldstone, it's an ideal concrete grinding wheel 4 1/2 for angle grinder..
  • The double row diamond cup grinding wheel is suitable for grinding machines and angle grinders to remove thinset and excess materials on your surface quickly..
  • The double segment of this diamond grinder cup configuration allows faster material removal ideal for all types of stone like concrete, ceramic, tile, marble, granite, rock, cement, etc..
  • Using the diamond grinding wheel 4 1/2 inch for surface finishing on concrete, screed, and natural stone like granite, can also be used for the removal of glues and epoxies or thinnest.
  • Durable high-quality brazed Double row segments diamond grinding cup wheel for fast and smooth grinding with 5mm segment height use on both wet or dry surfaces..
Check Stock

PFERD Bench Grinding Wheel Universal Type | 6x1/2x1 inch, vitrified Bond, Regular Aluminum Oxide, grit Size 60 | 61736 - for Universal use in in The Workshop, Included bushings 3/4, 5/8, 1/2 inch

  • High quality: Green silicon carbide grinding wheel is made of first grade sand, silicon carbide and binder at high temperature sintered, It is also called ceramic grinding wheel. Wear-resistant ,durable,strong toughness (Poor grinding wheel is reclaimed sand).
  • Features: Green silicon carbide grinding wheel, high hardness, high brittleness, sharp abrasive grains and good thermal conductivity. It is suitable for the grinding of non-ferrous metals such as cemented carbide tools and workpieces, as well as the grinding of non-metals such as optical glass, ceramics, and stone. It has the characteristics of not burning to the cutter head and not burning the workpiece.
  • Dimensions: Green Silicon Carbide Grinding Wheel diameter 6 inch /150mm, center hole 1/2 inch /12.7mm. thickness about 7.88 inch / 20m. Fixed aperture, not easy to shake during machine operation, safer.The standard size grinding wheel is mounted on the type 150 grinding wheel machine, please follow your machine Model, choose the grinding wheel that suits you.
  • Safety and Precautions: The workbench and the base grinder must be fixed, the machine without a fixed base will move, causing grinding and injury.Before installing the grinding wheel, please check and operate according to the instructions pr....
Check Stock

KSEIBI 644030 Diamond Concrete Grinding Wheel 4 1/2 inch for Polishing and Cleaning Stone Concrete Surface Cement Marble Rock Granite and Thinset Removing Angle Grinder Wheels Cup

  • Double Row Segmented Diamond Cup Wheel are designed for grinding concrete and fieldstone, it's an ideal concrete grinding wheel 4 1/2 for angle grinder..
  • The double row diamond cup grinding wheel is suitable for grinding machines and angle grinders to remove thinset and excess materials on your surface quickly..
  • The double segment of this diamond grinder cup configuration allows faster material removal ideal for all types of stone like concrete, ceramic, tile, marble, granite, rock, cement, etc..
  • Using the diamond grinding wheel 4 1/2 inch for surface finishing on concrete, screed, and natural stone like granite, can also be used for the removal of glues and epoxies or thinnest.
  • Durable high-quality brazed Double row segments diamond grinding cup wheel for fast and smooth grinding with 5mm segment height use on both wet or dry surfaces..
Check Stock

3 Pieces Turbo Row Diamond Grinding Cup Wheel Concrete Turbo Cup Disc Grinder for Sand of Concrete Walls, Concrete Floors, Granite Stone Marble Masonry Concrete, Yellow

  • What you will get: 3 pieces of abrasive turbo cup discs, enough to meet your grinding needs.
  • And they're designed with air holes, which can help maintain and cool the cutting pattern and reduce wear.
  • Quality material: this diamond cup wheel is made of quality metal alloy, which is wear-resistant and solid, sturdy and durable can quickly cut and polish concrete walls, floors and other surfaces.
  • Multipurpose cup wheel: the turbo row diamond grinding cup wheel is not only suitable for polishing concrete, granite, stone, marble, ceramic tile, masonry, but also suitable for some other construction materials.
  • Practical design: this grinding wheel features big grinding teeth to make it more pointed so as to remove chips faster.
  • Double riveting process makes the wheel to be fixed firmly on the turbo, safe to use.
  • Thickened grinding teeth contains more alloy powder for better durability.
  • Size information: the diameter of diamond cup grinding wheel is approx. 3.93 inch/ 100 mm, suitable for most grinding machines and angle grinders.
  • Please be sure to refer to the size carefully before purchase.
Check Stock

Disc Mower Drive Belt Set fits Kuhn GMD700G2 GMD600 GMD700HD GMD700 GMD600HD GMD600G2 83101791 fits John Deere 265 275 AE55671 fits Gehl 1162 1165 142593

  • Powerful 3/4 HP motor and industrial design ensure efficient and reliable performance. The grinder is ideal for a wide range of applications including mower blade and tool sharpening..
  • 9" aggressive 24 grit ceramic/steel wheel provides fast and effective sharpening and grinding of a variety of materials including metal and stone..
  • Ceramic grinding wheel eliminates grinding wheel dust compared to traditional grinding wheels..
  • Easy-to-learn and simple to use. Preset 30-degree guides quickly achieve professional results and factory edge on mower blades and other tools..
  • Grind any length cutting edge on both standard (right-hand) and reverse (left-hand) blades!.
Check Stock