Categories

Best Ceramic Fiber Production Line

Fiblink 1-Piece Conventional Boat Rod Saltwater Offshore Graphite Casting Fishing Rod(6-Feet, 30-50lb/50-80lb) (50-80-Pound)

  • Sensitive and Solid Construction - Carbon and glass fiber reinforced material for improved performance-action and increased sensitivity. Solid glass fiber blank offers incredible pulling power, strong and structurally enhanced solid glass fiber construction, maximizes strength while maintaining sensitivity..
  • High-Quality Guides - Stainless steel mixed with ceramic guide makes it more smooth, aviods line stucking in the guides, minimize friction for smooth, long casts, while also enhancing sensitivity by transferring vibrations from the line through the guide to the rod and to your hand. The guides are precisely aligned, along the bottom of the spine of the blank which is perfectly straight and true..
  • High Density EVA Handles - Non slip high density EVA handle and foregrips.
  • Handles and butts grips that provide comfort and a sure grip in all conditions. Durable EVA grips offer light weight and all day comfort. A multi-purpose hook holder, effective hook keeper..
  • Extreme Exposure Reel Seat -Aluminum alloy wheel seat with tapered hood transitions above and below reel seat protecting cap..
Check Stock

SoarUp 35A 4 in 1 ESC, 48mhz Frequency Throttle Response BLHeli‑32 4 in 1 ESC for FPV Traversing Machine

  • 35A ESC and Advanced SMTs: Integrate 4 high performance 35A ESCs, built in galvanometer, and purchase new advanced SMTs. After such high integration, the volume is only the same as that of the control of the traversing aircraft, so the installation.
  • Hardware PWM and Damped Light Technology: Hardware PWM drive motor, less noise, more throttle response. Damped Light technology, regenerative braking function, make motor deceleration more sensitive and effective, control more accurate.
  • BLHeli‑S Firmware and ESC Setting: Using BLHeli‑S firmware has powerful performance and rich functions.
  • it also supports setting ESC parameters in various ways, or upgrading ESC firmware (such as setting or upgrading ESC via throttle signal line, using ot.
  • Support and Input Output Line: It not only supports ordinary PWM throttle signal mode, oneshot 125, oneshot 42 and multshot ultra high speed throttle signals, but also supports the latest dshot150 / 300 / 600 digital throttle, with strong anti interferenc.
  • Main Control Chip and PCB Production: EMF8BB21F16G main control chip, operating frequency up to 48mhz. For mosfet, three in one IC driver and high quality high frequency ceramic capacitor. In high end PCB production process, pads are metallized to avoid p.
Check Stock

GYROS 1.5” Resin Cut-Off Wheels for Rotary Tools. 12 Double Fiberglass Reinforced Cutting Discs | High-Tensile for Materials like Steel, Bronze. Dremel Cutting Tool Accessory | Made in USA 11-32156/12

  • Efficient and Smooth Cuts – Gyros Fiber Disk, Resin Fiberglass Reinforced Cut-Off Wheels are designed to cut High-Tensile Strength materials cleanly. These Fiber Disk cutting discs are perfect for professional, commercial, and DIY production due to their minimal heat generation and thin cutting line. They are made in the United States and have a maximum speed of 45,000 RPM..
  • Double Reinforced, High Quality – Our cutting discs have a high working efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk HT Multi-Set is a must-have for professionals and hobbyists looking for the best Dremel and other top-brand rotary tool accessories..
  • High Tensile Strenght – Gyros HT mini cutting discs are designed to cut all hardened and softened steels, steel alloys, hard bronze, and metals. Because the abrasive is perfectly matched to the materials being cut, the cutting action is superior. LT stands for Low-Tensil Strength, which includes materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. ST for Super-Tensile Strenght materials such as stainless and titanium..
Check Stock

GYROS 2” Mini Resin Cut-Off Wheels for Rotary Tools. 12 Double Fiberglass Reinforced Cutting Discs | High-Tensile for Materials like Steel, Bronze. Dremel Cutting Tool Accessory. Made in USA 11-32208/12

  • Efficient and Smooth Cuts – Gyros Fiber Disk, Resin Fiberglass Reinforced Cut-Off Wheels are designed to cut High-Tensile Strength materials cleanly. These Fiber Disk cutting discs are perfect for professional, commercial, and DIY production due to their minimal heat generation and thin cutting line. They are made in the United States and have a maximum speed of 30,000 RPM..
  • Double Reinforced, High Quality – Our cutting discs have a high working efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk HT Multi-Set is a must-have for professionals and hobbyists looking for the best Dremel and other top-brand rotary tool accessories..
  • High Tensile Strenght – Gyros HT mini cutting discs are designed to cut all hardened and softened steels, steel alloys, hard bronze, and metals. Because the abrasive is perfectly matched to the materials being cut, the cutting action is superior. LT stands for Low-Tensil Strength, which includes materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. ST for Super-Tensile Strenght materials such as stainless and titanium..
Check Stock

GYROS 1.75” Mini Resin Cut-Off Wheels for Rotary Tools | 2 Double Fiberglass Reinforced Discs | For Wood, Plastic, Stone, Aluminum, Copper, Brass | Dremel Cutting Tool Accessory | Made in USA 11-21702

  • Efficient and Smooth Cuts - The Gyros Fiber Disk, Resin Fiberglass Reinforced Cut-Off Wheels are precisely developed to cut materials with low tensile strength. These Fiber Disk cutting discs are perfect for both professional and DIY production due to their low heat generation and thin cutting line. They are made in the United States and have a maximum speed of ​​42,000 RPM..
  • Double Reinforced, High Quality - Cutting discs are made of fiberglass abrasive with a double reinforced structure, they have a great working efficiency, unrivaled strength, and flexibility, are long-lasting and break-resistant. Professionals and hobbyists looking for the best rotary tool accessories for Dremel and other top-brand rotary tools will appreciate the Gyros Fiber Disk LT Multi-Set..
  • Low Tensile Strenght – Gyros LT mini cutting discs are designed to cut a variety of materials, including Wood, Plastic, Stone, Ceramic, Aluminum, Copper, and Brass. Because the abrasive used is perfectly matched to the materials being cut, the cutting action is superior. Other formulations are HT – stands for High-Tensile Strength materials such as steel alloys, hard bronze, and metals. ST – stands for Super-Tensile Strength materials such as stainless steel and titanium..
Check Stock

Sougayilang Surf Glass Spinning Rods 2-Pieces Saltwater Offshore Heavy Trolling Boat Fishing Rod Portable Travel Fishing Rod（white-8ft）

  • Sensitive and Solid Construction - Carbon and glass fiber reinforced material for improved performance-action and increased sensitivity. Solid glass fiber blank offers incredible pulling power, strong and structurally enhanced solid glass fiber construction, maximizes strength while maintaining sensitivity..
  • High-Quality Guides - Stainless steel mixed with ceramic guide makes it more smooth, aviods line stucking in the guides, minimize friction for smooth, long casts, while also enhancing sensitivity by transferring vibrations from the line through the guide to the rod..
  • Professional design-accurate data calculation makes the perfect combination of toughness and flexibility..
  • Comfort and Functionality – The butt section of the Surf Rods are wrapped in premium EVA for a non-slip fore and rear grip feel for all day casting. The stainless hooded reel seat keeps your reel in place as you cast and wind down on big fish..
  • Multiple lengths and movements-Longitude surf poles are available in four different lengths to meet your needs. The most popular camouflage pattern at the moment is a must-have as a fashion player..
Check Stock

Gyros 2” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-42002

  • Efficient and Smooth Cuts – Gyros Fiber Disk, Resin Fiberglass Reinforced Cut-Off Wheels are specially designed and formulated to cleanly cut Super-Tensile Strength materials. These Fiber Disk cutting discs are perfect for commercial, professional, and DIY production due to their minimal heat generation and thin cutting line. They are manufactured in the USA and can work at a maximum speed of 30,000 RPM..
  • Double Reinforced, High Quality – Our cutting discs have high efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk ST Multi-Set is a must-have for Professionals and Hobbyists looking for the finest rotary tool accessories for Dremel and other top brand rotary tools..
  • Super Tensile Strength – Gyros ST mini cutting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensi....
Check Stock

GYROS 1.5” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-41502

  • Efficient and Smooth Cuts – Gyros Fiber Disk, Resin Fiberglass Reinforced Cut-Off Wheels are specially designed and formulated to cleanly cut Super-Tensile Strength materials. These Fiber Disk cutting discs are perfect for commercial, professional, and DIY production due to their minimal heat generation and thin cutting line. They are manufactured in the USA and can work at a maximum speed of 45,000 RPM..
  • Double Reinforced, High Quality – Our cutting discs have high efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk ST Multi-Set is a must-have for Professionals and Hobbyists looking for the finest rotary tool accessories for Dremel and other top brand rotary tools..
  • Super Tensile Strength – Gyros ST mini cutting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensi....
Check Stock

Fiblink Surf Casting Fishing Rod 2-Piece Graphite Travel Baitcasting Fishing Rod (Length: 10')

  • Sensitive and Solid Carbon Fiber Construction - Carbon construction for improved performance-action and increased sensitivity. The rod delivers the extraordinary toughness of solid carbon fiber construction and precisely tuned action for boat fishing..
  • High-Quality Guides - Stainless steel mixed with ceramic guide makes it more smooth, aviods line stucking in the guides, minimize friction for smooth, long casts, while also enhancing sensitivity by transferring vibrations from the line through the guide to the rod and to your hand. The guides are precisely aligned, along the bottom of the spine of the blank which is perfectly straight and true..
  • Non Slip Rubber Shrink Tube Handle - Non slip rubber shrink tube handle with tapered rear grip Tip over butt ferrule connection for maximum strength and durability Machined tapered hood transitions above and below..
  • Extreme Exposure Reel Seat - Wheel seat with stainless steel tapered hood transitions above and below reel seat protecting cap..
  • Excellent Design - Design concept of durability and toughness, perfect strength to weight ratio.
Check Stock

GYROS 1.75” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-41702

  • Efficient and Smooth Cuts – Gyros Fiber Disk, Resin Fiberglass Reinforced Cut-Off Wheels are specially designed and formulated to cleanly cut Super-Tensile Strength materials. These Fiber Disk cutting discs are perfect for commercial, professional, and DIY production due to their minimal heat generation and thin cutting line. They are manufactured in the USA and can work at a maximum speed of 42,000 RPM..
  • Double Reinforced, High Quality – Our cutting discs have high efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk ST Multi-Set is a must-have for Professionals and Hobbyists looking for the finest rotary tool accessories for Dremel and other top brand rotary tools..
  • Super Tensile Strength – Gyros ST mini cutting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensi....
Check Stock

Fiblink Surf Spinning Fishing Rod 4-Piece Graphite Travel Fishing Rod(11-Feet & 13-Feet & 15-Feet) (Length: 15')

  • Sensitive and Solid Carbon Fiber Construction – Carbon construction for improved performance-action and increased sensitivity. The rod delivers the extraordinary toughness of solid carbon fiber construction and precisely tuned action for boat fishing..
  • High Performance – Stainless steel mixed with ceramic guide makes it more smooth, aviods line stucking in the guides, minimize friction for smooth, long casts, while also enhancing sensitivity by transferring vibrations from the line through the guide to the rod and to your hand. The guides are precisely aligned, along the bottom of the spine of the blank which is perfectly straight and true..
  • Non Slip Rubber Shrink Tube Handle – Non slip rubber shrink tube handle with tapered rear grip Tip over butt ferrule connection for maximum strength and durability Machined tapered hood transitions above and below..
  • Extreme Exposure Reel Seat – Wheel seat with stainless steel tapered hood transitions above and below reel seat protecting cap..
  • Excellent Design – Precise data calculation and the perfect combination of performance presents a cost-effective pole..
Check Stock

Fiblink Surf Spinning Fishing Rod 4-Piece Graphite Travel Fishing Rod Length 9

  • Sensitive and Solid Carbon Fiber Construction - Carbon construction for improved performance-action and increased sensitivity. The rod delivers the....
  • High-Quality Guides - Stainless steel mixed with ceramic guide makes it more smooth, aviods line stucking in the guides, minimize friction for smooth,....
  • Non Slip Cork Handle - Non slip cork handle with tapered rear grip. Tip over butt ferrule connection for maximum strength and durability Machined....
  • Extreme Exposure Reel Seat - Wheel seat with stainless steel tapered hood transitions above and below reel seat protecting cap..
Check Stock

Cable Matters OFNP Plenum Multimode Duplex OM3 Fiber Cable 3.3 Feet / 1m (40Gb 10Gb, LC to LC, 50/125 Fiber Optic Cable, Fiber Patch Cable)

  • LC/PC-LC/PC,200Meters,Duplex,Multimode,OM2,50/125,3.3mm Diameter.
  • 200 Meters (656 feet), Armoured, LSZH, Zip-Cord Reinforced, Duplex (2 Fiber Strands), 1.25mm ceramic ferrule, LC/PC to LC/PC, Fiber Patch Cable/Jumper Cord..
  • Great flexibility and duribility with a flexible stainless steel tube inside the outer jacket as the armor to protect the fiber glass inside..
  • Note:This cable is with weatherproof cover for sunshine and rain, but we donot recommend to bury or line overhead directly..
Check Stock